/* bsp.h
*
* This include file contains all MVME162fx board IO definitions.
*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* Modifications of respective RTEMS file: COPYRIGHT (c) 1994.
* EISCAT Scientific Association. M.Savitski
*
* This material is a part of the MVME162 Board Support Package
* for the RTEMS executive. Its licensing policies are those of the
* RTEMS above.
*
* $Id$
*/
#ifndef __MVME162_h
#define __MVME162_h
#ifdef __cplusplus
extern "C" {
#endif
#include <bspopts.h>
#include <rtems.h>
#include <clockdrv.h>
#include <console.h>
#include <iosupp.h>
/*
* confdefs.h overrides for this BSP:
* - number of termios serial ports (defaults to 1)
* - Interrupt stack space is not minimum if defined.
*/
/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
#define CONFIGURE_INTERRUPT_STACK_MEMORY (4 * 1024)
#include <mvme16x_hw.h>
/*----------------------------------------------------------------*/
typedef volatile struct {
unsigned char chipID;
unsigned char chipREV;
unsigned char gen_control;
unsigned char vector_base;
unsigned long timer_cmp_1;
unsigned long timer_cnt_1;
unsigned long timer_cmp_2;
unsigned long timer_cnt_2;
unsigned char LSB_prescaler_count;
unsigned char prescaler_clock_adjust;
unsigned char time_ctl_2;
unsigned char time_ctl_1;
unsigned char time_int_ctl_4;
unsigned char time_int_ctl_3;
unsigned char time_int_ctl_2;
unsigned char time_int_ctl_1;
unsigned char dram_err_int_ctl;
unsigned char SCC_int_ctl;
unsigned char time_ctl_4;
unsigned char time_ctl_3;
unsigned short DRAM_space_base;
unsigned short SRAM_space_base;
unsigned char DRAM_size;
unsigned char DRAM_SRAM_opt;
unsigned char SRAM_size;
unsigned char reserved;
unsigned char LANC_error;
unsigned char reserved1;
unsigned char LANC_int_ctl;
unsigned char LANC_berr_ctl;
unsigned char SCSI_error;
unsigned char general_inputs;
unsigned char MVME_162_version;
unsigned char SCSI_int_ctl;
unsigned long timer_cmp_3;
unsigned long timer_cnt_3;
unsigned long timer_cmp_4;
unsigned long timer_cnt_4;
unsigned char bus_clk;
unsigned char PROM_acc_time_ctl;
unsigned char FLASH_acc_time_ctl;
unsigned char ABORT_int_ctl;
unsigned char RESET_ctl;
unsigned char watchdog_timer_ctl;
unsigned char acc_watchdog_time_base_sel;
unsigned char reserved2;
unsigned char DRAM_ctl;
unsigned char reserved4;
unsigned char MPU_status;
unsigned char reserved3;
unsigned long prescaler_count;
} mcchip_regs;
#define mcchip ((mcchip_regs * const) 0xFFF42000)
/*----------------------------------------------------------------*/
/*
* SCC Z8523(0) defines and macros
* -------------------------------
* Prototypes for the low-level serial io are also included here,
* because such stuff is bsp-specific (yet). The function bodies
* are in console.c
*
* NOTE from Eric Vaitl <evaitl@viasat.com>:
*
* I dropped RTEMS into a 162FX today (the MVME162-513). The 162FX has a
* bug in the MC2 chip (revision 1) such that the SCC data register is
* not accessible, it has to be accessed indirectly through the SCC
* control register.
*/
enum {portB, portA};
rtems_boolean char_ready(int port, char *ch);
char char_wait(int port);
void char_put(int port, char ch);
#define TX_BUFFER_EMPTY 0x04
#define RX_DATA_AVAILABLE 0x01
#define SCC_VECTOR 0x40
typedef volatile struct {
unsigned char pad1;
volatile unsigned char csr;
unsigned char pad2;
volatile unsigned char buf;
} scc_regs;
#define scc ((scc_regs * const) 0xFFF45000)
#define ZWRITE0(port, v) (scc[port].csr = (unsigned char)(v))
#define ZREAD0(port) (scc[port].csr)
#define ZREAD(port, n) (ZWRITE0(port, n), (scc[port].csr))
#define ZREADD(port) (scc[port].csr=0x08, scc[port].csr )
#define ZWRITE(port, n, v) (ZWRITE0(port, n), ZWRITE0(port, v))
#define ZWRITED(port, v) (scc[port].csr = 0x08, \
scc[port].csr = (unsigned char)(v))
/*----------------------------------------------------------------*/
/*
* Define the time limits for RTEMS Test Suite test durations.
* Long test and short test duration limits are provided. These
* values are in seconds and need to be converted to ticks for the
* application.
*
*/
#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */
#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */
/*
* Define the interrupt mechanism for Time Test 27
*
* NOTE: We use software interrupt 0
*/
#define MUST_WAIT_FOR_INTERRUPT 0
#define Install_tm27_vector( handler ) \
set_vector( (handler), VBR1 * 0x10 + 0x8, 1 ); \
lcsr->intr_level[2] |= 3; \
lcsr->intr_ena |= 0x100;
#define Cause_tm27_intr() lcsr->intr_soft_set |= 0x100
#define Clear_tm27_intr() lcsr->intr_clear |= 0x100
#define Lower_tm27_intr()
#ifdef M162_INIT
#undef EXTERN
#define EXTERN
#else
#undef EXTERN
#define EXTERN extern
#endif
/*
* Device Driver Table Entries
*/
/*
* NOTE: Use the standard Console driver entry
*/
/*
* NOTE: Use the standard Clock driver entry
*/
/* miscellaneous stuff assumed to exist */
extern rtems_configuration_table BSP_Configuration;
extern m68k_isr_entry M68Kvec[]; /* vector table address */
/* functions */
void bsp_cleanup( void );
m68k_isr_entry set_vector(
rtems_isr_entry handler,
rtems_vector_number vector,
int type
);
#ifdef __cplusplus
}
#endif
#endif
/* end of include file */
