/*
* $Id
*/
#include <mrm332.h>
#include <rtems/m68k/sim.h>
#define __START_C__
#include "bsp.h"
m68k_isr_entry M68Kvec[256];
m68k_isr_entry vectors[256];
char * const __argv[]= {"main", ""};
void boot_card(int argc, char * const argv[]);
/*
* This prototype really should have the noreturn attribute but
* that causes a warning. Not sure how to fix that.
*/
/* void dumby_start () __attribute__ ((noreturn)); */
void start_c ();
void start_c() {
/* Synthesizer Control Register */
/* see section(s) 4.8 */
/* end include in ram_init.S */
*SYNCR = (unsigned short int)
( SAM(MRM_W,15,VCO) | SAM(0x0,14,PRESCALE) | SAM(MRM_Y,8,COUNTER) );
while (! (*SYNCR & SLOCK)); /* protect from clock overshoot */
/* include in ram_init.S */
*SYNCR = (unsigned short int)
( SAM(MRM_W,15,VCO) | SAM(MRM_X,14,PRESCALE) | SAM(MRM_Y,8,COUNTER) );
/* System Protection Control Register */
/* !!! can only write to once after reset !!! */
/* see section 3.8.4 of the SIM Reference Manual */
*SYPCR = (unsigned char)( HME | BME );
/* Periodic Interrupr Control Register */
/* see section 3.8.2 of the SIM Reference Manual */
*PICR = (unsigned short int)
( SAM(0,8,PIRQL) | SAM(MRM_PIV,0,PIV) );
/* ^^^ zero disables interrupt, don't enable here or ram_init will
be wrong. It's enabled below. */
/* Periodic Interrupt Timer Register */
/* see section 3.8.3 of the SIM Reference Manual */
*PITR = (unsigned short int)( SAM(0x09,0,PITM) );
/* 1.098mS interrupt, assuming 32.768 KHz input clock */
/* Port C Data */
/* load values before enabled */
*PORTC = (unsigned char) 0x0;
/* Port E and F Data Register */
/* see section 9 of the SIM Reference Manual */
*PORTE0 = (unsigned char) 0;
*PORTF0 = (unsigned char) 0;
/* Port E and F Data Direction Register */
/* see section 9 of the SIM Reference Manual */
*DDRE = (unsigned char) 0xff;
*DDRF = (unsigned char) 0xfd;
/* Port E and F Pin Assignment Register */
/* see section 9 of the SIM Reference Manual */
*PEPAR = (unsigned char) 0;
*PFPAR = (unsigned char) 0;
/* end of SIM initalization code */
/* end include in ram_init.S */
/*
* Initialize RAM by copying the .data section out of ROM (if
* needed) and "zero-ing" the .bss section.
*/
{
register char *src = _etext;
register char *dst = _copy_start;
if (_copy_data_from_rom)
/* ROM has data at end of text; copy it. */
while (dst < _edata)
*dst++ = *src++;
/* Zero bss */
for (dst = _clear_start; dst< end; dst++)
{
*dst = 0;
}
}
/*
* Initialize vector table.
*/
{
m68k_isr_entry *monitors_vector_table;
m68k_get_vbr(monitors_vector_table);
M68Kvec[ 4 ] = monitors_vector_table[ 4 ]; /* breakpoints vector */
M68Kvec[ 9 ] = monitors_vector_table[ 9 ]; /* trace vector */
M68Kvec[ 31 ] = monitors_vector_table[ 31 ]; /* level 7 interrupt */
M68Kvec[ 47 ] = monitors_vector_table[ 47 ]; /* system call vector */
M68Kvec[ 66 ] = monitors_vector_table[ 66 ]; /* user defined */
m68k_set_vbr(&M68Kvec);
}
/*
* Initalize the board.
*/
/* Spurious should be called in the predriver hook */
/* Spurious_Initialize(); */
//console_init();
/*
* Execute main with arguments argc and agrv.
*/
boot_card(1,__argv);
reboot();
}
