blob: 36baf95c797be5fe76df2a7c302ea5cc0cf626be (
plain) (
tree)
|
|
/* bsp.h
*
* This include file contains all mrm board IO definitions.
*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* $Id$
*/
#ifndef __MRM332_BSP_h
#define __MRM332_BSP_h
#ifdef __cplusplus
extern "C" {
#endif
#include <bspopts.h>
#include <rtems.h>
#include <clockdrv.h>
#include <console.h>
#include <iosupp.h>
#include <mrm332.h>
#include <sim.h>
#include <qsm.h>
/*
* confdefs.h overrides for this BSP:
* - number of termios serial ports (defaults to 1)
* - Interrupt stack space is not minimum if defined.
*/
/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
/* #define CONFIGURE_INTERRUPT_STACK_MEMORY (TBD * 1024) */
/*
* Define the time limits for RTEMS Test Suite test durations.
* Long test and short test duration limits are provided. These
* values are in seconds and need to be converted to ticks for the
* application.
*
*/
#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */
#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */
/*
* Define the interrupt mechanism for Time Test 27
*/
/* XXX - JRS - I want to compile the tmtests */
#define MUST_WAIT_FOR_INTERRUPT 1
#define Install_tm27_vector( handler )
#define Cause_tm27_intr()
#define Clear_tm27_intr()
#define Lower_tm27_intr()
/*
* Simple spin delay in microsecond units for device drivers.
* This is very dependent on the clock speed of the target.
*/
#define delay( microseconds ) \
{ register rtems_unsigned32 _delay=(microseconds); \
register rtems_unsigned32 _tmp=123; \
asm volatile( "0: \
nbcd %0 ; \
nbcd %0 ; \
dbf %1,0b" \
: "=d" (_tmp), "=d" (_delay) \
: "0" (_tmp), "1" (_delay) ); \
}
/* externals */
extern char _etext[];
extern char _copy_start[];
extern char _edata[];
extern char _clear_start[];
extern char end[];
extern char _copy_data_from_rom[];
/* constants */
#ifdef __START_C__
#define STACK_SIZE "#0x800"
#else
#define STACK_SIZE 0x800
#endif
/* macros */
#define RAW_PUTS(str) \
{ register char *ptr = str; \
while (*ptr) outbyte(*ptr++); \
}
#define RAW_PUTI(n) { \
register int i, j; \
\
RAW_PUTS("0x"); \
for (i=28;i>=0;i -= 4) { \
j = (n>>i) & 0xf; \
outbyte( (j>9 ? j-10+'a' : j+'0') ); \
} \
}
/* miscellaneous stuff assumed to exist */
extern rtems_configuration_table BSP_Configuration;
extern m68k_isr_entry M68Kvec[]; /* vector table address */
extern int stack_size;
extern int stack_start;
/*
* Device Driver Table Entries
*/
/*
* NOTE: Use the standard Console driver entry
*/
/*
* NOTE: Use the standard Clock driver entry
*/
/* functions */
void bsp_cleanup( void );
m68k_isr_entry set_vector(
rtems_isr_entry handler,
rtems_vector_number vector,
int type
);
void console_init(void);
void Spurious_Initialize(void);
void _UART_flush(void);
void Clock_exit(void);
void outbyte(char);
#ifdef __cplusplus
}
#endif
#endif
/* end of include file */
|