blob: 2d6b141de8f10aa1af4d1a8be3b4a99af999ae22 (
plain) (
tree)
|
|
#
# GDB Init script for the Coldfire 5206e processor.
#
# The main purpose of this script is to perform minimum initialization of
# processor so code can be loaded. Also, exception handling is performed.
#
# Copyright (C) OKTET Ltd., St.-Petersburg, Russia
# Author: Victor V. Vengerov <vvv@oktet.ru>
#
# This script partially based on gdb scripts written by
# Eric Norum, <eric@skatter.usask.ca>
#
#
# The license and distribution terms for this file may be
# found in the file LICENSE in this distribution or at
#
# http://www.rtems.com/license/LICENSE.
#
# $Id$
#
define addresses
set $mbar = 0x10000001
set $simr = $mbar - 1 + 0x003
set $icr1 = $mbar - 1 + 0x014
set $icr2 = $mbar - 1 + 0x015
set $icr3 = $mbar - 1 + 0x016
set $icr4 = $mbar - 1 + 0x017
set $icr5 = $mbar - 1 + 0x018
set $icr6 = $mbar - 1 + 0x019
set $icr7 = $mbar - 1 + 0x01A
set $icr8 = $mbar - 1 + 0x01B
set $icr9 = $mbar - 1 + 0x01C
set $icr10 = $mbar - 1 + 0x01D
set $icr11 = $mbar - 1 + 0x01E
set $icr12 = $mbar - 1 + 0x01F
set $icr13 = $mbar - 1 + 0x020
set $imr = $mbar - 1 + 0x036
set $ipr = $mbar - 1 + 0x03A
set $rsr = $mbar - 1 + 0x040
set $sypcr = $mbar - 1 + 0x041
set $swivr = $mbar - 1 + 0x042
set $swsr = $mbar - 1 + 0x043
set $dcrr = $mbar - 1 + 0x046
set $dctr = $mbar - 1 + 0x04A
set $dcar0 = $mbar - 1 + 0x04C
set $dcmr0 = $mbar - 1 + 0x050
set $dccr0 = $mbar - 1 + 0x057
set $dcar1 = $mbar - 1 + 0x058
set $dcmr1 = $mbar - 1 + 0x05C
set $dccr1 = $mbar - 1 + 0x063
set $csar0 = $mbar - 1 + 0x064
set $csmr0 = $mbar - 1 + 0x068
set $cscr0 = $mbar - 1 + 0x06E
set $csar1 = $mbar - 1 + 0x070
set $csmr1 = $mbar - 1 + 0x074
set $cscr1 = $mbar - 1 + 0x07A
set $csar2 = $mbar - 1 + 0x07C
set $csmr2 = $mbar - 1 + 0x080
set $cscr2 = $mbar - 1 + 0x086
set $csar3 = $mbar - 1 + 0x088
set $csmr3 = $mbar - 1 + 0x08C
set $cscr3 = $mbar - 1 + 0x092
set $csar4 = $mbar - 1 + 0x094
set $csmr4 = $mbar - 1 + 0x098
set $cscr4 = $mbar - 1 + 0x09E
set $csar5 = $mbar - 1 + 0x0A0
set $csmr5 = $mbar - 1 + 0x0A4
set $cscr5 = $mbar - 1 + 0x0AA
set $csar6 = $mbar - 1 + 0x0AC
set $csmr6 = $mbar - 1 + 0x0B0
set $cscr6 = $mbar - 1 + 0x0B6
set $csar7 = $mbar - 1 + 0x0B8
set $csmr7 = $mbar - 1 + 0x0BC
set $cscr7 = $mbar - 1 + 0x0C2
set $dmcr = $mbar - 1 + 0x0C6
set $par = $mbar - 1 + 0x0CA
set $tmr1 = $mbar - 1 + 0x100
set $trr1 = $mbar - 1 + 0x104
set $tcr1 = $mbar - 1 + 0x108
set $tcn1 = $mbar - 1 + 0x10C
set $ter1 = $mbar - 1 + 0x111
set $tmr2 = $mbar - 1 + 0x120
set $trr2 = $mbar - 1 + 0x124
set $tcr2 = $mbar - 1 + 0x128
set $tcn2 = $mbar - 1 + 0x12C
set $ter2 = $mbar - 1 + 0x131
end
#
# Setup CSAR0 for the FLASH ROM.
#
define setup-cs
set *((short*) $csar0) = 0xffe0
set *((int*) $csmr0) = 0x000f0000
set *((short*) $cscr0) = 0x1da3
set *((short*) $csar1) = 0x5000
set *((int*) $csmr1) = 0x00000000
set *((short*) $cscr1) = 0x3d43
set *((short*) $csar2) = 0x3000
set *((int*) $csmr2) = 0x000f0000
set *((short*) $cscr2) = 0x1903
set *((short*) $csar3) = 0x4000
set *((int*) $csmr3) = 0x000f0000
set *((short*) $cscr3) = 0x0083
end
#
# Setup the DRAM controller.
#
define setup-dram
set *((short*) $dcrr) = 24
set *((short*) $dctr) = 0x0000
set *((short*) $dcar0) = 0x0000
set *((long*) $dcmr0) = 0x000e0000
set *((char*) $dccr0) = 0x07
set *((short*) $dcar1) = 0x0000
set *((long*) $dcmr1) = 0x00000000
set *((char*) $dccr1) = 0x00
end
#
# Wake up the board
#
define initboard
addresses
setup-cs
# setup-dram
end
define ss
si
x/i $pc
end
#
# Display exception information
#
define exception-info
set $excpc = *(unsigned int *)($sp+4)
set $excfmt = (*(unsigned int *)$sp >> 28) & 0x0f
set $excfs = ((*(unsigned int *)$sp >> 24) & 0x0c) | \
((*(unsigned int *)$sp >> 16) & 0x03)
set $excvec = (*(unsigned int *)$sp >> 18) & 0xff
set $excsr = *(unsigned int *)$sp & 0xffff
printf "EXCEPTION -- SR:0x%X PC:0x%X FRAME:0x%X VECTOR:%d\n", \
$excsr, $excpc, $sp, $excvec
if $excvec == 2
printf "Access error exception"
end
if $excvec == 3
printf "Address error exception"
end
if $excvec == 4
printf "Illegal instruction exception"
end
if $excvec == 8
printf "Privelege violation exception"
end
if $excvec == 9
printf "Trace exception"
end
if $excvec == 10
printf "Unimplemented LINE-A opcode exception"
end
if $excvec == 11
printf "Unimplemented LINE-F opcode exception"
end
if $excvec == 12
printf "Debug interrupt"
end
if $excvec == 14
printf "Format error exception"
end
if $excfs == 0x04
printf " on instruction fetch"
end
if $excfs == 0x08
printf " on operand write"
end
if $excfs == 0x09
printf " on write to write-protected space"
end
if $excfs == 0x0c
printf " on operand read"
end
printf "\n"
x/4i $excpc
set $pc=$excpc
set $sp=$sp+8
end
target bdm /dev/bdmcf0
initboard
load
set $pc=start
set $sp=0x20001ffc
b bsp_cleanup
b _stop
b _unexp_exception
commands
silent
exception-info
end
b _unexp_int
b _reserved_int
b _spurious_int
|
