blob: 6c4dd9f7cb2b335fa5b86a4b809e46601ce657cb (
plain) (
tree)
|
|
/*
* Board Support Package for MCF5206eLITE evaluation board
* BSP definitions
*
* Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia
* Author: Victor V. Vengerov <vvv@oktet.ru>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
*
* http://www.rtems.org/license/LICENSE.
*/
#ifndef _BSP_H
#define _BSP_H
#include "mcf5206/mcf5206e.h"
/*** Board resources allocation ***/
/*
* To achieve some compatibility with dBUG monitor, we use the same
* memory resources allocation as it is used in dBUG.
*
* If this definitions will be changed, change the linker script also.
*/
/* Memory mapping */
/* CS0: Boot Flash */
#define BSP_MEM_ADDR_FLASH (0xFFE00000)
#define BSP_MEM_SIZE_FLASH (1*1024*1024)
#define BSP_MEM_MASK_FLASH (MCF5206E_CSMR_MASK_1M)
/* CS2: External SRAM */
#define BSP_MEM_ADDR_ESRAM (0x30000000)
#define BSP_MEM_SIZE_ESRAM (1*1024*1024)
#define BSP_MEM_MASK_ESRAM (MCF5206E_CSMR_MASK_1M)
/* CS3: General-Purpose I/O register */
#define BSP_MEM_ADDR_GPIO (0x40000000)
#define BSP_MEM_SIZE_GPIO (64*1024)
#define BSP_MEM_MASK_GPIO (MCF5206E_CSMR_MASK_64K)
/* DRAM0: Dynamic RAM */
#define BSP_MEM_ADDR_DRAM (0x00000000)
#define BSP_MEM_SIZE_DRAM (16*1024*1024)
#define BSP_MEM_MASK_DRAM (MCF5206E_DCMR_MASK_16M)
/* On-chip SRAM */
#define BSP_MEM_ADDR_SRAM (0x20000000)
#define BSP_MEM_SIZE_SRAM (8*1024)
/* On-chip peripherial registers */
#define BSP_MEM_ADDR_IMM (0x10000000)
#define BSP_MEM_SIZE_IMM (1*1024)
#define MBAR BSP_MEM_ADDR_IMM
/* Interrupt vector assignment */
#define BSP_INTVEC_AVEC1 (25)
#define BSP_INTLVL_AVEC1 (1)
#define BSP_INTPRIO_AVEC1 (3)
#define BSP_INTVEC_AVEC2 (26)
#define BSP_INTLVL_AVEC2 (2)
#define BSP_INTPRIO_AVEC2 (3)
#define BSP_INTVEC_AVEC3 (27)
#define BSP_INTLVL_AVEC3 (3)
#define BSP_INTPRIO_AVEC3 (3)
#define BSP_INTVEC_AVEC4 (28)
#define BSP_INTLVL_AVEC4 (4)
#define BSP_INTPRIO_AVEC4 (3)
#define BSP_INTVEC_AVEC5 (29)
#define BSP_INTLVL_AVEC5 (5)
#define BSP_INTPRIO_AVEC5 (3)
#define BSP_INTVEC_AVEC6 (30)
#define BSP_INTLVL_AVEC6 (6)
#define BSP_INTPRIO_AVEC6 (3)
#define BSP_INTVEC_AVEC7 (31)
#define BSP_INTLVL_AVEC7 (7)
#define BSP_INTPRIO_AVEC7 (3)
#define BSP_INTVEC_TIMER1 (BSP_INTVEC_AVEC5)
#define BSP_INTLVL_TIMER1 (BSP_INTLVL_AVEC5)
#define BSP_INTPRIO_TIMER1 (2)
#define BSP_INTVEC_TIMER2 (BSP_INTVEC_AVEC6)
#define BSP_INTLVL_TIMER2 (BSP_INTLVL_AVEC6)
#define BSP_INTPRIO_TIMER2 (2)
#define BSP_INTVEC_MBUS (BSP_INTVEC_AVEC4)
#define BSP_INTLVL_MBUS (BSP_INTLVL_AVEC4)
#define BSP_INTPRIO_MBUS (2)
#define BSP_INTVEC_UART1 (64)
#define BSP_INTLVL_UART1 (4)
#define BSP_INTPRIO_UART1 (0)
#define BSP_INTVEC_UART2 (65)
#define BSP_INTLVL_UART2 (4)
#define BSP_INTPRIO_UART2 (1)
#define BSP_INTVEC_DMA0 (66)
#define BSP_INTLVL_DMA0 (3)
#define BSP_INTPRIO_DMA0 (1)
#define BSP_INTVEC_DMA1 (67)
#define BSP_INTLVL_DMA1 (3)
#define BSP_INTPRIO_DMA1 (2)
/* Location of DS1307 Real-Time Clock/NVRAM chip */
#define DS1307_I2C_BUS_NUMBER (0)
#ifndef ASM
#include <bspopts.h>
#include <rtems.h>
#include <rtems/console.h>
#include <rtems/iosupp.h>
#include <rtems/clockdrv.h>
#include <rtems/rtc.h>
#include <bsp/default-initial-extension.h>
#include "i2c.h"
#ifdef __cplusplus
extern "C" {
#endif
/* System frequency */
#define BSP_SYSTEM_FREQUENCY ((unsigned int)&_SYS_CLOCK_FREQUENCY)
extern char _SYS_CLOCK_FREQUENCY; /* Don't use this variable directly!!! */
/* MBUS I2C bus clock default frequency */
#define BSP_MBUS_FREQUENCY (16000)
/* Number of I2C buses supported in this board */
#define I2C_NUMBER_OF_BUSES (1)
/* I2C bus selection */
#define I2C_SELECT_BUS(bus)
/*
* Simple spin delay in microsecond units for device drivers.
* This is very dependent on the clock speed of the target.
*/
#define delay( microseconds ) \
{ register uint32_t _delay=(microseconds); \
register uint32_t _tmp=123; \
__asm__ volatile( "0: \
nbcd %0 ; \
nbcd %0 ; \
dbf %1,0b" \
: "=d" (_tmp), "=d" (_delay) \
: "0" (_tmp), "1" (_delay) ); \
}
extern rtems_isr_entry M68Kvec[]; /* vector table address */
extern rtems_isr (*rtems_clock_hook)(rtems_vector_number);
/* functions */
rtems_isr_entry set_vector(
rtems_isr_entry handler,
rtems_vector_number vector,
int type
);
/*
* Prototypes for BSP methods that cross file boundaries
*/
void Init5206e(void);
#ifdef __cplusplus
}
#endif
#endif /* ASM */
#endif
|
