/*
* RTEMS driver for M68360 SCC1 Ethernet
* W. Eric Norum
* Saskatchewan Accelerator Laboratory
* University of Saskatchewan
* Saskatoon, Saskatchewan, CANADA
* eric@skatter.usask.ca
*
* Modify for Motorola 68en320 Ethernet Controller
* CXR S.A. France - 2000/09/14 - franckj@cxr.fr
*/
#include <bsp.h>
#include <stdio.h>
#include <rtems/error.h>
#include <m302_int.h>
#include <rtems/rtems_bsdnet.h>
#include <sys/param.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <errno.h>
#include <net/if.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <rtems/m68k/m68302.h>
/*
* Number of SCCs supported by this driver
*/
#define NSCCDRIVER 1
/*
* Default number of buffer descriptors set aside for this driver.
* The number of transmit buffer descriptors has to be quite large
* since a single frame often uses four or more buffer descriptors.
*/
#define RX_BUF_COUNT 64
#define TX_BUF_COUNT 64
/*
* RTEMS event used by interrupt handler to signal driver tasks.
* This must not be any of the events used by the network task synchronization.
*/
#define INTERRUPT_EVENT RTEMS_EVENT_1
/*
* RTEMS event used to start transmit daemon.
* This must not be the same as INTERRUPT_EVENT.
*/
#define START_TRANSMIT_EVENT RTEMS_EVENT_2
/*
* Receive buffer size -- Allow for a full ethernet packet including CRC
*/
#define RBUF_SIZE 1520
#if (MCLBYTES < RBUF_SIZE)
# error "Driver must have MCLBYTES > RBUF_SIZE"
#endif
static struct m68302_imp * a_m68302_imp;
#define M302_ETHER_IVECTOR 0x40
/*
* Per-device data
*/
struct scc_softc {
struct arpcom arpcom;
struct mbuf **rxMbuf;
struct mbuf **txMbuf;
int acceptBroadcast;
int rxBdCount;
int txBdCount;
int txBdHead;
int txBdTail;
int txBdActiveCount;
struct m68302_scc_bd *rxBdBase;
struct m68302_scc_bd *txBdBase;
rtems_id rxDaemonTid;
rtems_id txDaemonTid;
/*
* Statistics
*/
unsigned long rxInterrupts;
unsigned long rxNotFirst;
unsigned long rxNotLast;
unsigned long rxGiant;
unsigned long rxNonOctet;
unsigned long rxRunt;
unsigned long rxBadCRC;
unsigned long rxOverrun;
unsigned long rxCollision;
unsigned long txInterrupts;
unsigned long txDeferred;
unsigned long txHeartbeat;
unsigned long txLateCollision;
unsigned long txRetryLimit;
unsigned long txUnderrun;
unsigned long txLostCarrier;
unsigned long txRawWait;
unsigned long txCoalesced;
unsigned long txCoalesceFailed;
unsigned long txRetry;
};
static struct scc_softc scc_softc[NSCCDRIVER];
/*
* interrupt handler
*/
static rtems_isr
m302Enet_interrupt_handler (rtems_vector_number v)
{
/*
* Frame received?
*/
if (M68en302imp_intr_event & INTR_EVENT_BIT_RFINT) {
M68en302imp_intr_event = INTR_EVENT_BIT_RFINT;
M68en302imp_intr_mask &= ~INTR_MASK_BIT_RFIEN;
scc_softc[0].rxInterrupts++;
rtems_bsdnet_event_send (scc_softc[0].rxDaemonTid, INTERRUPT_EVENT);
}
/*
* Buffer transmitted or transmitter error?
*/
if ((M68en302imp_intr_event & INTR_EVENT_BIT_TFINT) ||
((M68en302imp_intr_event & INTR_EVENT_BIT_TXB))){
M68en302imp_intr_event = INTR_EVENT_BIT_TFINT | INTR_EVENT_BIT_TXB;
M68en302imp_intr_mask &= ~(INTR_MASK_BIT_TFIEN | INTR_MASK_BIT_TXIEN);
scc_softc[0].txInterrupts++;
rtems_bsdnet_event_send (scc_softc[0].txDaemonTid, INTERRUPT_EVENT);
}
}
/*
* Initialize the ethernet hardware
*/
static void
m302Enet_initialize_hardware (struct scc_softc *sc)
{
int i;
unsigned char *hwaddr;
rtems_status_code status;
rtems_isr_entry old_handler;
struct m68302_scc_bd *a_bd; /* Buffer Descriptor pointer */
ushort *cam;
#define LBK 0x0008
#define DSQE 0x0010
#define FDE 0x0020
/*
* standard loopback
*/
M68302imp_port_data (1) &= ~(LBK);
M68302imp_port_data (1) |= (FDE);
M68en302imp_ecntrl=0x0001;
/*
* Set dma configuration status register EDMA
*/
i = (sc->txBdCount == 16) ? EDMA_BDSIZE_16T_112R :
(sc->txBdCount == 32) ? EDMA_BDSIZE_32T_96R :
(sc->txBdCount == 64) ? EDMA_BDSIZE_64T_64R :
EDMA_BDSIZE_8T_120R;
M68en302imp_edma = EDMA_BLIM_8ACCESS | EDMA_WMRK_16FIFO | EDMA_BIT_TSRLY | (ushort)i;
/*
* Set maximum receive buffer length
*/
M68en302imp_emrblr = RBUF_SIZE; /* 1520 */
/*
* Set interrupt vector
*/
M68en302imp_intr_vect = M302_ETHER_IVECTOR;
M68en302imp_intr_mask=0x0;
/*
* Set ethernet Configuration
*/
M68en302imp_ecnfig=0x0000;
/*
* Set ETHER_TEST
*/
M68en302imp_ether_test=0x0000;
/*
* Set AR control Register
* Ignore/accept broadcast packets as specified
*/
M68en302imp_ar_cntrl = ((sc->acceptBroadcast) ? 0 : AR_CNTRL_BIT_NO_BROADCAST) ;
/*
* Allocate mbuf pointers
*/
sc->rxMbuf = malloc (sc->rxBdCount * sizeof *sc->rxMbuf, M_MBUF, M_NOWAIT);
sc->txMbuf = malloc (sc->txBdCount * sizeof *sc->txMbuf, M_MBUF, M_NOWAIT);
if (!sc->rxMbuf || !sc->txMbuf)
rtems_panic ("No memory for mbuf pointers");
/*
* Set our physical address
*/
hwaddr = sc->arpcom.ac_enaddr;
cam=(ushort *)(M68en302imp_cet);
for (i=0;i<64;i++){
cam[(4*i)]=0x00ff;
cam[(4*i)+1]=0x00ff;
cam[(4*i)+2]=0x00ff;
}
cam[4] = (hwaddr[0] << 8) | hwaddr[1];
cam[5] = (hwaddr[2] << 8) | hwaddr[3];
cam[6] = (hwaddr[4] << 8) | hwaddr[5];
/*
* Set receiver and transmitter buffer descriptor bases
*/
a_bd = M68302imp_a_eth_bd (0); /* point to first BD */
for (i=0;i<128;i++){
M68302_scc_bd_stat_ctrl (a_bd + i) = 0;
M68302_scc_bd_data_lgth (a_bd + i) = 0;
M68302_scc_bd_p_buffer (a_bd + i) = NULL;
}
sc->txBdBase = M68302imp_a_eth_bd ( 0 ); /* point to first BD */
sc->rxBdBase = M68302imp_a_eth_bd ( sc->txBdCount); /* point to first RX BD atfer all TX*/
/*
* Set up transmit buffer descriptors
*/
for (i = 0 ; i < sc->txBdCount ; i++) {
sc->txMbuf[i] = NULL;
}
sc->txBdHead = sc->txBdTail = 0;
sc->txBdActiveCount = 0;
/*
* Clear any outstanding events
*/
M68en302imp_intr_event = 0x07FF;
/*
* Set up interrupts
*/
status = rtems_interrupt_catch (m302Enet_interrupt_handler,
M302_ETHER_IVECTOR,
&old_handler);
if (status != RTEMS_SUCCESSFUL)
rtems_panic ("Can't attach M302 ether interrupt handler: %s\r\n",
rtems_status_text (status));
}
/*
* Soak up buffer descriptors that have been sent
* Note that a buffer descriptor can't be retired as soon as it becomes
* ready. The MC68360 Errata (May 96) says that, "If an Ethernet frame is
* made up of multiple buffers, the user should not reuse the first buffer
* descriptor until the last buffer descriptor of the frame has had its
* ready bit cleared by the CPM".
*/
static void
m302Enet_retire_tx_bd (struct scc_softc *sc)
{
uint16_t status;
int i;
int nRetired;
struct mbuf *m, *n;
int retries = 0;
int saveStatus = 0;
i = sc->txBdTail;
nRetired = 0;
while ((sc->txBdActiveCount != 0)
&& (((status = (sc->txBdBase + i)->stat_ctrl) & BUF_STAT_READY) == 0)) {
/*
* Check for errors which stop the transmitter.
*/
if (status & (BUF_STAT_LATE_COLLISION |
BUF_STAT_RETRY_LIMIT |
BUF_STAT_UNDERRUN)) {
int j;
if (status & BUF_STAT_LATE_COLLISION)
sc->txLateCollision++;
if (status & BUF_STAT_RETRY_LIMIT)
sc->txRetryLimit++;
if (status & BUF_STAT_UNDERRUN)
sc->txUnderrun++;
/*
* Reenable buffer descriptors
*/
j = sc->txBdTail;
for (;;) {
status = (sc->txBdBase + j)->stat_ctrl;
if (status & BUF_STAT_READY)
break;
(sc->txBdBase + j)->stat_ctrl = BUF_STAT_READY |
(status & ( BUF_STAT_WRAP |
BUF_STAT_INTERRUPT |
BUF_STAT_LAST |
BUF_STAT_TX_CRC));
if (status & BUF_STAT_LAST)
break;
if (++j == sc->txBdCount)
j = 0;
}
/*
* Move transmitter back to the first
* buffer descriptor in the frame.
*/
/* m360.scc1p._tbptr = m360.scc1p.tbase +
sc->txBdTail * sizeof (m360BufferDescriptor_t);
*/
/*
* Restart the transmitter
*/
/* M360ExecuteRISC (M360_CR_OP_RESTART_TX | M360_CR_CHAN_SCC1);*/
continue;
}
saveStatus |= status;
retries += (status >> 2) & 0xF;
nRetired++;
if (status & BUF_STAT_LAST) {
/*
* A full frame has been transmitted.
* Free all the associated buffer descriptors.
*/
if (saveStatus & BUF_STAT_DEFER)
sc->txDeferred++;
if (saveStatus & BUF_STAT_HEARTBIT)
sc->txHeartbeat++;
if (saveStatus & BUF_STAT_CARRIER_LOST)
sc->txLostCarrier++;
saveStatus = 0;
sc->txRetry += retries;
retries = 0;
sc->txBdActiveCount -= nRetired;
while (nRetired) {
nRetired--;
m = sc->txMbuf[sc->txBdTail];
MFREE (m, n);
if (++sc->txBdTail == sc->txBdCount)
sc->txBdTail = 0;
}
}
if (++i == sc->txBdCount)
i = 0;
}
}
/*
* SCC reader task
*/
static void
scc_rxDaemon (void *arg)
{
struct scc_softc *sc = (struct scc_softc *)arg;
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m;
uint16_t status;
volatile struct m68302_scc_bd *rxBd;
int rxBdIndex;
/*
* Allocate space for incoming packets and start reception
*/
for (rxBdIndex = 0 ; ;) {
rxBd = sc->rxBdBase + rxBdIndex;
MGETHDR (m, M_WAIT, MT_DATA);
MCLGET (m, M_WAIT);
m->m_pkthdr.rcvif = ifp;
sc->rxMbuf[rxBdIndex] = m;
rxBd->p_buffer = mtod (m, void *);
if (++rxBdIndex == sc->rxBdCount) {
rxBd->stat_ctrl = BUF_STAT_EMPTY | BUF_STAT_INTERRUPT | BUF_STAT_WRAP;
break;
}
rxBd->stat_ctrl = BUF_STAT_EMPTY | BUF_STAT_INTERRUPT;
}
/*
* Input packet handling loop
*/
rxBdIndex = 0;
for (;;) {
rxBd = sc->rxBdBase + rxBdIndex;
/*
* Wait for packet if there's not one ready
*/
if ((status = rxBd->stat_ctrl) & BUF_STAT_EMPTY) {
/*
* Clear old events
*/
M68en302imp_intr_event = INTR_EVENT_BIT_RFINT;
/*
* Wait for packet
* Note that the buffer descriptor is checked
* *before* the event wait -- this catches the
* possibility that a packet arrived between the
* `if' above, and the clearing of the event register.
*/
while ((status = rxBd->stat_ctrl) & BUF_STAT_EMPTY) {
rtems_interrupt_level level;
rtems_event_set events;
/*
* Unmask RXF (Full frame received) event
*/
rtems_interrupt_disable (level);
M68en302imp_intr_mask |= INTR_MASK_BIT_RFIEN;
rtems_interrupt_enable (level);
rtems_bsdnet_event_receive (INTERRUPT_EVENT,
RTEMS_WAIT|RTEMS_EVENT_ANY,
RTEMS_NO_TIMEOUT,
&events);
}
}
/*
* Check that packet is valid
*/
if ((status & (BUF_STAT_LAST |
BUF_STAT_FIRST_IN_FRAME |
BUF_STAT_LONG |
BUF_STAT_NONALIGNED |
BUF_STAT_SHORT |
BUF_STAT_CRC_ERROR |
BUF_STAT_OVERRUN |
BUF_STAT_COLLISION)) ==
(BUF_STAT_LAST |
BUF_STAT_FIRST_IN_FRAME)) {
/*
* Pass the packet up the chain.
* FIXME: Packet filtering hook could be done here.
*/
struct ether_header *eh;
m = sc->rxMbuf[rxBdIndex];
m->m_len = m->m_pkthdr.len = rxBd->data_lgth -
sizeof(uint32_t) -
sizeof(struct ether_header);
eh = mtod (m, struct ether_header *);
m->m_data += sizeof(struct ether_header);
ether_input (ifp, eh, m);
/*
* Allocate a new mbuf
*/
MGETHDR (m, M_WAIT, MT_DATA);
MCLGET (m, M_WAIT);
m->m_pkthdr.rcvif = ifp;
sc->rxMbuf[rxBdIndex] = m;
rxBd->p_buffer = mtod (m, void *);
}
else {
/*
* Something went wrong with the reception
*/
if (!(status & BUF_STAT_LAST))
sc->rxNotLast++;
if (!(status & BUF_STAT_FIRST_IN_FRAME))
sc->rxNotFirst++;
if (status & BUF_STAT_LONG)
sc->rxGiant++;
if (status & BUF_STAT_NONALIGNED)
sc->rxNonOctet++;
if (status & BUF_STAT_SHORT)
sc->rxRunt++;
if (status & BUF_STAT_CRC_ERROR)
sc->rxBadCRC++;
if (status & BUF_STAT_OVERRUN)
sc->rxOverrun++;
if (status & BUF_STAT_COLLISION)
sc->rxCollision++;
}
/*
* Reenable the buffer descriptor
*/
rxBd->stat_ctrl = (status & (BUF_STAT_WRAP | BUF_STAT_INTERRUPT)) | BUF_STAT_EMPTY;
/*
* Move to next buffer descriptor
*/
if (++rxBdIndex == sc->rxBdCount)
rxBdIndex = 0;
}
}
static void
sendpacket (struct ifnet *ifp, struct mbuf *m)
{
struct scc_softc *sc = ifp->if_softc;
volatile struct m68302_scc_bd *firstTxBd, *txBd;
struct mbuf *l = NULL;
uint16_t status;
int nAdded;
/*
* Free up buffer descriptors
*/
m302Enet_retire_tx_bd (sc);
/*
* Set up the transmit buffer descriptors.
* No need to pad out short packets since the
* hardware takes care of that automatically.
* No need to copy the packet to a contiguous buffer
* since the hardware is capable of scatter/gather DMA.
*/
status = 0;
nAdded = 0;
txBd = firstTxBd = sc->txBdBase + sc->txBdHead;
while (m) {
/*
* There are more mbufs in the packet than there
* are transmit buffer descriptors.
* Coalesce into a single buffer.
*/
if (nAdded == sc->txBdCount) {
struct mbuf *nm;
int j;
char *dest;
/*
* Get the pointer to the first mbuf of the packet
*/
if (sc->txBdTail != sc->txBdHead)
rtems_panic ("sendpacket coalesce");
m = sc->txMbuf[sc->txBdTail];
/*
* Rescind the buffer descriptor READY bits
*/
for (j = 0 ; j < sc->txBdCount ; j++)
(sc->txBdBase + j)->stat_ctrl = 0;
/*
* Allocate an mbuf cluster
* Toss the packet if allocation fails
*/
MGETHDR (nm, M_DONTWAIT, MT_DATA);
if (nm == NULL) {
sc->txCoalesceFailed++;
m_freem (m);
return;
}
MCLGET (nm, M_DONTWAIT);
if (nm->m_ext.ext_buf == NULL) {
sc->txCoalesceFailed++;
m_freem (m);
m_free (nm);
return;
}
nm->m_pkthdr = m->m_pkthdr;
nm->m_len = nm->m_pkthdr.len;
/*
* Copy data from packet chain to mbuf cluster
*/
sc->txCoalesced++;
dest = nm->m_ext.ext_buf;
while (m) {
struct mbuf *n;
if (m->m_len) {
memcpy (dest, mtod(m, caddr_t), m->m_len);
dest += m->m_len;
}
MFREE (m, n);
m = n;
}
/*
* Redo the send with the new mbuf cluster
*/
m = nm;
nAdded = 0;
status = 0;
continue;
}
/*
* Wait for buffer descriptor to become available.
*/
if ((sc->txBdActiveCount + nAdded) == sc->txBdCount) {
/*
* Clear old events
*/
M68en302imp_intr_event = INTR_EVENT_BIT_TFINT | INTR_EVENT_BIT_TXB;
/*
* Wait for buffer descriptor to become available.
* Note that the buffer descriptors are checked
* *before* entering the wait loop -- this catches
* the possibility that a buffer descriptor became
* available between the `if' above, and the clearing
* of the event register.
* This is to catch the case where the transmitter
* stops in the middle of a frame -- and only the
* last buffer descriptor in a frame can generate
* an interrupt.
*/
m302Enet_retire_tx_bd (sc);
while ((sc->txBdActiveCount + nAdded) == sc->txBdCount) {
rtems_interrupt_level level;
rtems_event_set events;
/*
* Unmask TXB (buffer transmitted) and
* TXE (transmitter error) events.
*/
rtems_interrupt_disable (level);
M68en302imp_intr_mask |= INTR_MASK_BIT_TFIEN | INTR_MASK_BIT_TXIEN;
rtems_interrupt_enable (level);
rtems_bsdnet_event_receive (INTERRUPT_EVENT,
RTEMS_WAIT|RTEMS_EVENT_ANY,
RTEMS_NO_TIMEOUT,
&events);
m302Enet_retire_tx_bd (sc);
}
}
/*
* The IP fragmentation routine in ip_output
* can produce packet fragments with zero length.
*/
if (m->m_len) {
/*
* Fill in the buffer descriptor.
* Don't set the READY flag in the first buffer
* descriptor till the whole packet has been readied.
*/
txBd = sc->txBdBase + sc->txBdHead;
txBd->p_buffer = mtod (m, void *);
txBd->data_lgth = m->m_len;
sc->txMbuf[sc->txBdHead] = m;
status = nAdded ? BUF_STAT_READY : 0;
if (++sc->txBdHead == sc->txBdCount) {
status |= BUF_STAT_WRAP;
sc->txBdHead = 0;
}
txBd->stat_ctrl = status;
l = m;
m = m->m_next;
nAdded++;
}
else {
/*
* Just toss empty mbufs
*/
struct mbuf *n;
MFREE (m, n);
m = n;
if (l != NULL)
l->m_next = m;
}
}
if (nAdded) {
/*
* Send the packet
*/
txBd->stat_ctrl = status | BUF_STAT_LAST | BUF_STAT_TX_CRC | BUF_STAT_INTERRUPT;
firstTxBd->stat_ctrl |= BUF_STAT_READY;
sc->txBdActiveCount += nAdded;
}
}
/*
* Driver transmit daemon
*/
void
scc_txDaemon (void *arg)
{
struct scc_softc *sc = (struct scc_softc *)arg;
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m;
rtems_event_set events;
for (;;) {
/*
* Wait for packet
*/
rtems_bsdnet_event_receive (START_TRANSMIT_EVENT, RTEMS_EVENT_ANY | RTEMS_WAIT, RTEMS_NO_TIMEOUT, &events);
/*
* Send packets till queue is empty
*/
for (;;) {
/*
* Get the next mbuf chain to transmit.
*/
IF_DEQUEUE(&ifp->if_snd, m);
if (!m)
break;
sendpacket (ifp, m);
}
ifp->if_flags &= ~IFF_OACTIVE;
}
}
/*
* Send packet (caller provides header).
*/
static void
scc_start (struct ifnet *ifp)
{
struct scc_softc *sc = ifp->if_softc;
rtems_bsdnet_event_send (sc->txDaemonTid, START_TRANSMIT_EVENT);
ifp->if_flags |= IFF_OACTIVE;
}
/*
* Initialize and start the device
*/
static void
scc_init (void *arg)
{
struct scc_softc *sc = arg;
struct ifnet *ifp = &sc->arpcom.ac_if;
if (sc->txDaemonTid == 0) {
/*
* Set up SCC hardware
*/
m302Enet_initialize_hardware (sc);
sc->txDaemonTid = rtems_bsdnet_newproc ("SCtx", 4096, scc_txDaemon, sc);
sc->rxDaemonTid = rtems_bsdnet_newproc ("SCrx", 4096, scc_rxDaemon, sc);
}
/*
* Set flags appropriately
*/
/* if (ifp->if_flags & IFF_PROMISC)
m360.scc1.psmr |= 0x200;
else
m360.scc1.psmr &= ~0x200;
*/
/*
* Tell the world that we're running.
*/
ifp->if_flags |= IFF_RUNNING;
/*
* Enable receiver and transmitter
*/
M68en302imp_ecntrl = ECNTRL_BIT_RESET | ECNTRL_BIT_ETHER_EN;
}
/*
* Stop the device
*/
static void
scc_stop (struct scc_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
ifp->if_flags &= ~IFF_RUNNING;
/*
* Shut down receiver and transmitter
*/
M68en302imp_ecntrl &= ~(ECNTRL_BIT_RESET | ECNTRL_BIT_ETHER_EN);
}
/*
* Show interface statistics
*/
static void
scc_stats (struct scc_softc *sc)
{
printf (" Rx Interrupts:%-8lu", sc->rxInterrupts);
printf (" Not First:%-8lu", sc->rxNotFirst);
printf (" Not Last:%-8lu\r\n", sc->rxNotLast);
printf (" Giant:%-8lu", sc->rxGiant);
printf (" Runt:%-8lu", sc->rxRunt);
printf (" Non-octet:%-8lu\r\n", sc->rxNonOctet);
printf (" Bad CRC:%-8lu", sc->rxBadCRC);
printf (" Overrun:%-8lu", sc->rxOverrun);
printf (" Collision:%-8lu\r\n", sc->rxCollision);
/* printf (" Discarded:%-8lu\r\n", (unsigned long)m360.scc1p.un.ethernet.disfc);
*/
printf (" Tx Interrupts:%-8lu", sc->txInterrupts);
printf (" Deferred:%-8lu", sc->txDeferred);
printf (" Missed Hearbeat:%-8lu\r\n", sc->txHeartbeat);
printf (" No Carrier:%-8lu", sc->txLostCarrier);
printf ("Retransmit Limit:%-8lu", sc->txRetryLimit);
printf (" Late Collision:%-8lu\r\n", sc->txLateCollision);
printf (" Underrun:%-8lu", sc->txUnderrun);
printf (" Raw output wait:%-8lu", sc->txRawWait);
printf (" Coalesced:%-8lu\r\n", sc->txCoalesced);
printf (" Coalesce failed:%-8lu", sc->txCoalesceFailed);
printf (" Retries:%-8lu\r\n", sc->txRetry);
}
/*
* Driver ioctl handler
*/
static int
scc_ioctl (struct ifnet *ifp, ioctl_command_t command, caddr_t data)
{
struct scc_softc *sc = ifp->if_softc;
int error = 0;
switch (command) {
case SIOCGIFADDR:
case SIOCSIFADDR:
ether_ioctl (ifp, command, data);
break;
case SIOCSIFFLAGS:
switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) {
case IFF_RUNNING:
scc_stop (sc);
break;
case IFF_UP:
scc_init (sc);
break;
case IFF_UP | IFF_RUNNING:
scc_stop (sc);
scc_init (sc);
break;
default:
break;
}
break;
case SIO_RTEMS_SHOW_STATS:
scc_stats (sc);
break;
/*
* FIXME: All sorts of multicast commands need to be added here!
*/
default:
error = EINVAL;
break;
}
return error;
}
/*
* Attach an SCC driver to the system
*/
int
rtems_ether1_driver_attach (struct rtems_bsdnet_ifconfig *config)
{
struct scc_softc *sc;
struct ifnet *ifp;
int mtu;
int unitNumber;
char *unitName;
a_m68302_imp = (struct m68302_imp *)0x700000L;
/*
* Parse driver name
*/
if ((unitNumber = rtems_bsdnet_parse_driver_name (config, &unitName)) < 0)
return 0;
/*
* Is driver free?
*/
if ((unitNumber <= 0) || (unitNumber > NSCCDRIVER)) {
printf ("Bad SCC unit number.\r\n");
return 0;
}
sc = &scc_softc[unitNumber - 1];
ifp = &sc->arpcom.ac_if;
if (ifp->if_softc != NULL) {
printf ("Driver already in use.\r\n");
return 0;
}
/*
* Process options
*/
if (config->hardware_address) {
memcpy (sc->arpcom.ac_enaddr, config->hardware_address, ETHER_ADDR_LEN);
}
if (config->mtu)
mtu = config->mtu;
else
mtu = ETHERMTU;
if (config->rbuf_count)
sc->rxBdCount = config->rbuf_count;
else
sc->rxBdCount = RX_BUF_COUNT;
if (config->xbuf_count)
sc->txBdCount = config->xbuf_count;
else
sc->txBdCount = TX_BUF_COUNT;
sc->acceptBroadcast = !config->ignore_broadcast;
/*
* Set up network interface values
*/
ifp->if_softc = sc;
ifp->if_unit = unitNumber;
ifp->if_name = unitName;
ifp->if_mtu = mtu;
ifp->if_init = scc_init;
ifp->if_ioctl = scc_ioctl;
ifp->if_start = scc_start;
ifp->if_output = ether_output;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX;
if (ifp->if_snd.ifq_maxlen == 0)
ifp->if_snd.ifq_maxlen = ifqmaxlen;
/*
* Attach the interface
*/
if_attach (ifp);
ether_ifattach (ifp);
return 1;
};