/***************************************************************************
*
* $Header$
*
* MODULE DESCRIPTION:
* This module implements the RTEMS drivers for the PC serial ports
* as /dev/ttyS1 for COM1 and /dev/ttyS2 as COM2. If one of the ports
* is used as the console, this driver would fail to initialize.
*
* This code was based on the console driver. It is based on the
* current termios framework. This is just a shell around the
* termios support.
*
* by: Rosimildo da Silva:
* rdasilva@connecttel.com
* http://www.connecttel.com
*
* MODIFICATION/HISTORY:
*
* $Log$
* Revision 1.3 2000/12/05 16:37:38 joel
* 2000-12-01 Joel Sherrill <joel@OARcorp.com>
*
* * pc386/console/console.c, pc386/console/serial_mouse.c,
* pc386/console/vgainit.c, shared/comm/tty_drv.c: Remove warnings.
*
* Revision 1.2 2000/10/18 16:10:50 joel
* 2000-10-18 Charles-Antoine Gauthier <charles.gauthier@nrc.ca>
*
* * comm/i386-stub-glue.c, comm/tty_drv.c, comm/uart.c, comm/uart.h:
* Add the ability to set parity, number of data bits and
* number of stop bits to the existing i386 serial drivers.
*
* Revision 1.1 2000/08/30 08:18:56 joel
* 2000-08-26 Rosimildo da Silva <rdasilva@connecttel.com>
*
* * shared/comm: Added "/dev/ttyS1" & "/dev/ttyS2" support for
* the i386 BSPs.
* * shared/comm/gdb_glue.c: New file.
* * shared/comm/i386_io.c: New file.
* * shared/comm/tty_drv.c: New file.
* * shared/comm/tty_drv.h: New file.
* * shared/comm/Makefile.am: Account for new files.
* * shared/comm/uart.c: Adds support for sending characters to
* another "line discipline."
*
****************************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include <assert.h>
#include <bsp.h>
#include <irq.h>
#include <rtems/libio.h>
#include <rtems/termiostypes.h>
#include <termios.h>
#include <uart.h>
#include <libcpu/cpuModel.h>
int BSP_poll_read(int);
/* Internal routines */
static int tty1_conSetAttr( int minor, const struct termios *t);
static int tty2_conSetAttr( int minor, const struct termios *t);
static void isr_on(const rtems_irq_connect_data *);
static void isr_off(const rtems_irq_connect_data *);
static int isr_is_on(const rtems_irq_connect_data *);
extern BSP_polling_getchar_function_type BSP_poll_char;
extern int BSPConsolePort;
extern void rtems_set_waiting_id_comx( int port, rtems_id id, rtems_event_set event );
/*
* Interrupt structure for tty1
*/
static rtems_irq_connect_data tty1_isr_data =
{
BSP_UART_COM1_IRQ,
BSP_uart_termios_isr_com1,
isr_on,
isr_off,
isr_is_on};
/*
* Interrupt structure for tty2
*/
static rtems_irq_connect_data tty2_isr_data =
{
BSP_UART_COM2_IRQ,
BSP_uart_termios_isr_com2,
isr_on,
isr_off,
isr_is_on};
static void
isr_on(const rtems_irq_connect_data *unused)
{
return;
}
static void
isr_off(const rtems_irq_connect_data *unused)
{
return;
}
static int
isr_is_on(const rtems_irq_connect_data *irq)
{
return BSP_irq_enabled_at_i8259s(irq->name);
}
void tty_reserve_resources(rtems_configuration_table *conf)
{
rtems_termios_reserve_resources(conf, 1);
return;
}
/*
* TTYS1 - device driver INITIALIZE entry point.
*/
rtems_device_driver
tty1_initialize(rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg)
{
rtems_status_code status;
/* Check if this port is not been used as console */
if( BSPConsolePort == BSP_UART_COM1 )
{
status = -1;
printk("TTYS1: port selected as console.\n");
rtems_fatal_error_occurred( status );
}
/*
* Set up TERMIOS
*/
rtems_termios_initialize();
/*
* Do device-specific initialization
*/
/* 9600-8-N-1, without hardware flow control */
BSP_uart_init( BSP_UART_COM1, 9600, CHR_8_BITS, 0, 0, 0 );
status = BSP_install_rtems_irq_handler( &tty1_isr_data );
if( !status )
{
printk("Error installing ttyS1 interrupt handler!\n");
rtems_fatal_error_occurred(status);
}
/*
* Register the device
*/
status = rtems_io_register_name ("/dev/ttyS1", major, 0);
if (status != RTEMS_SUCCESSFUL)
{
printk("Error registering ttyS1 device!\n");
rtems_fatal_error_occurred (status);
}
printk("Device: /dev/ttyS1 initialized.\n");
return RTEMS_SUCCESSFUL;
} /* tty_initialize */
static int tty1_last_close(int major, int minor, void *arg)
{
BSP_remove_rtems_irq_handler( &tty1_isr_data );
return 0;
}
/*
* TTY1 - device driver OPEN entry point
*/
rtems_device_driver
tty1_open(rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg)
{
rtems_status_code status;
#ifndef USE_TASK_DRIVEN
static rtems_termios_callbacks cb =
{
NULL, /* firstOpen */
tty1_last_close, /* lastClose */
NULL, /* poll read */
BSP_uart_termios_write_com1, /* write */
tty1_conSetAttr, /* setAttributes */
NULL, /* stopRemoteTx */
NULL, /* startRemoteTx */
TERMIOS_IRQ_DRIVEN /* outputUsesInterrupts */
};
#else
static rtems_termios_callbacks cb =
{
NULL, /* firstOpen */
tty1_last_close, /* lastClose */
BSP_uart_termios_read_com1, /* poll read */
BSP_uart_termios_write_com1, /* write */
tty1_conSetAttr, /* setAttributes */
NULL, /* stopRemoteTx */
NULL, /* startRemoteTx */
TERMIOS_TASK_DRIVEN /* outputUsesInterrupts */
};
#endif
status = rtems_termios_open( major, minor, arg, &cb );
if(status != RTEMS_SUCCESSFUL)
{
printk("Error openning tty1 device\n");
return status;
}
/*
* Pass data area info down to driver
*/
BSP_uart_termios_set( BSP_UART_COM1,
((rtems_libio_open_close_args_t *)arg)->iop->data1 );
/* Enable interrupts on channel */
BSP_uart_intr_ctrl( BSP_UART_COM1, BSP_UART_INTR_CTRL_TERMIOS);
return RTEMS_SUCCESSFUL;
}
/*
* TTY - device driver CLOSE entry point
*/
rtems_device_driver
tty_close(rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg)
{
return (rtems_termios_close (arg));
} /* tty_close */
/*
* TTY device driver READ entry point.
* Read characters from the tty device.
*/
rtems_device_driver
tty_read(rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg)
{
return rtems_termios_read (arg);
} /* tty_read */
/*
* TTY device driver WRITE entry point.
* Write characters to the tty device.
*/
rtems_device_driver
tty_write(rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg)
{
return rtems_termios_write (arg);
} /* tty_write */
/*
* Handle ioctl request. This is a generic internal
* routine to handle both devices.
*/
static rtems_device_driver tty_control( int port, void *arg )
{
rtems_libio_ioctl_args_t *args = arg;
switch( args->command )
{
default:
return rtems_termios_ioctl (arg);
break;
}
args->ioctl_return = 0;
return RTEMS_SUCCESSFUL;
}
/*
* Handle ioctl request for ttyS1.
*/
rtems_device_driver
tty1_control(rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
)
{
return tty_control( BSP_UART_COM1, arg );
}
static int
conSetAttr(int port, int minor, const struct termios *t)
{
unsigned long baud, databits, parity, stopbits;
switch (t->c_cflag & CBAUD)
{
case B50:
baud = 50;
break;
case B75:
baud = 75;
break;
case B110:
baud = 110;
break;
case B134:
baud = 134;
break;
case B150:
baud = 150;
break;
case B200:
baud = 200;
break;
case B300:
baud = 300;
break;
case B600:
baud = 600;
break;
case B1200:
baud = 1200;
break;
case B1800:
baud = 1800;
break;
case B2400:
baud = 2400;
break;
case B4800:
baud = 4800;
break;
case B9600:
baud = 9600;
break;
case B19200:
baud = 19200;
break;
case B38400:
baud = 38400;
break;
case B57600:
baud = 57600;
break;
case B115200:
baud = 115200;
break;
default:
baud = 0;
rtems_fatal_error_occurred (RTEMS_INTERNAL_ERROR);
return 0;
}
if (t->c_cflag & PARENB) {
/* Parity is enabled */
if (t->c_cflag & PARODD) {
/* Parity is odd */
parity = PEN;
}
else {
/* Parity is even */
parity = PEN | EPS;
}
}
else {
/* No parity */
parity = 0;
}
switch (t->c_cflag & CSIZE) {
case CS5: databits = CHR_5_BITS; break;
case CS6: databits = CHR_6_BITS; break;
case CS7: databits = CHR_7_BITS; break;
default: /* just to avoid warnings -- all cases are covered */
case CS8: databits = CHR_8_BITS; break;
}
if (t->c_cflag & CSTOPB) {
/* 2 stop bits */
stopbits = STB;
}
else {
/* 1 stop bit */
stopbits = 0;
}
printk("Setting attributes, port=%X, baud=%d, linemode = 0x%02x\n", port, baud, databits | parity | stopbits );
BSP_uart_set_attributes(port, baud, databits, parity, stopbits);
return 0;
}
/*
* Handle ioctl request for ttyS2.
*/
static int
tty1_conSetAttr( int minor, const struct termios *t)
{
return conSetAttr( BSP_UART_COM1, minor, t );
}
/*
* TTY2 device driver INITIALIZE entry point.
*/
rtems_device_driver
tty2_initialize(rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg)
{
rtems_status_code status;
/* Check if this port is not been used as console */
if( BSPConsolePort == BSP_UART_COM2 )
{
status = -1;
printk("TTY2: port selected as console.\n");
rtems_fatal_error_occurred( status );
}
/*
* Set up TERMIOS
*/
rtems_termios_initialize();
/*
* Do device-specific initialization
*/
/* 9600-8-N-1, without hardware flow control */
BSP_uart_init( BSP_UART_COM2, 9600, CHR_8_BITS, 0, 0, 0);
status = BSP_install_rtems_irq_handler( &tty2_isr_data );
if( !status )
{
printk("Error installing serial console interrupt handler!\n");
rtems_fatal_error_occurred(status);
}
/*
* Register the device
*/
status = rtems_io_register_name ("/dev/ttyS2", major, 0);
if (status != RTEMS_SUCCESSFUL)
{
printk("Error registering tty2 device!\n");
rtems_fatal_error_occurred (status);
}
printk("Device: /dev/ttyS2 initialized.\n");
return RTEMS_SUCCESSFUL;
} /* tty_initialize */
static int tty2_last_close(int major, int minor, void *arg)
{
BSP_remove_rtems_irq_handler( &tty2_isr_data );
return 0;
}
/*
* TTY2 device driver OPEN entry point
*/
rtems_device_driver
tty2_open(rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg)
{
rtems_status_code status;
#ifndef USE_TASK_DRIVEN
static rtems_termios_callbacks cb =
{
NULL, /* firstOpen */
tty2_last_close, /* lastClose */
NULL, /* poll read */
BSP_uart_termios_write_com2, /* write */
tty2_conSetAttr, /* setAttributes */
NULL, /* stopRemoteTx */
NULL, /* startRemoteTx */
TERMIOS_IRQ_DRIVEN /* outputUsesInterrupts */
};
#else
static rtems_termios_callbacks cb =
{
NULL, /* firstOpen */
tty2_last_close, /* lastClose */
BSP_uart_termios_read_com2, /* poll read */
BSP_uart_termios_write_com2, /* write */
tty2_conSetAttr, /* setAttributes */
NULL, /* stopRemoteTx */
NULL, /* startRemoteTx */
TERMIOS_TASK_DRIVEN /* outputUsesInterrupts */
};
#endif
status = rtems_termios_open (major, minor, arg, &cb);
if(status != RTEMS_SUCCESSFUL)
{
printk("Error openning tty1 device\n");
return status;
}
/*
* Pass data area info down to driver
*/
BSP_uart_termios_set( BSP_UART_COM2,
((rtems_libio_open_close_args_t *)arg)->iop->data1 );
/* Enable interrupts on channel */
BSP_uart_intr_ctrl( BSP_UART_COM2, BSP_UART_INTR_CTRL_TERMIOS);
return RTEMS_SUCCESSFUL;
}
/*
* Handle ioctl request for TTY2
*/
rtems_device_driver
tty2_control(rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
)
{
return tty_control( BSP_UART_COM2, arg );
}
static int
tty2_conSetAttr( int minor, const struct termios *t)
{
return conSetAttr( BSP_UART_COM2, minor, t );
}
