2009-11-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* ne2000/ne2000.c: Logic on defaulting port number was inverted when
adding command line arguments.
2009-11-05 Till Straumann <strauman@slac.stanford.edu>
* console/console.c: Fixed compiler warning.
2009-11-05 Till Straumann <strauman@slac.stanford.edu>
* start/start.S, console/console.c: Separated code
that switched console and printk port based on info
gathered from the commandline and/or a BSP provided
routine into new BSP_console_select() which is called
from 'start.S' so that early messages make it to the
redirected printk port.
2009-10-28 Till Straumann <strauman@slac.stanford.edu>
* start/start.S: Make sure initial stack is aligned
to CPU_STACK_ALIGNMENT before calling C-code.
2009-10-27 Till Straumann <strauman@slac.stanford.edu>
* include/bsp.h, console/console.c: Provide weak-alias
hook so that the application may choose the console.
2009-10-21 Ralf Corsépius <ralf.corsepius@rtems.org>
* make/custom/pc386.cfg: Remove RTEMS_BSP_FAMILY.
2009-10-20 Ralf Corsépius <ralf.corsepius@rtems.org>
* configure.ac: Don't add -ansi -fasm to CFLAGS.
2009-10-15 Chris Johns <chrisj@rtems.org>
* ne2000/ne2000.c: Add --ne2k-irq and --ne2k-port boot command
line configure options.
* ide/ide.c: Fix a bug which left 4 words in the buffer of the
disk. Some devices do not follow the standard and terminate the
command which a new command occurs and/or low data ready when data
is still to be read.
2009-10-15 Ralf Corsépius <ralf.corsepius@rtems.org>
* make/custom/pc386.cfg: New (relocated from /make/custom).
* make/custom/pc386dx.cfg: New (relocated from /make/custom).
* make/custom/pc486.cfg: New (relocated from /make/custom).
* make/custom/pc586.cfg: New (relocated from /make/custom).
* make/custom/pc686.cfg: New (relocated from /make/custom).
2009-10-10 Sebastian Huber <sebastian.huber@embedded-brains.de>
* Makefile.am: Added interrupt server.
2009-10-08 Chris Johns <chrisj@rtems.org>
* ide/ide.c: Fixed more IDE driver bugs. The driver can transfer
64K in a single write on my test PC and qemu with this driver. The
driver only checks the data ready bit at the start of each 512
block being transfered. This has speed the transfer loop up. Fixed
the timing so the BSP timer is used until RTEMS has started.
2009-09-30 Ralf Corsépius <ralf.corsepius@rtems.org>
* console/console.c, console/serial_mouse.c: Reflect
termios_baud_to_number having been renamed to
rtems_termios_baud_to_number.
2009-09-15 Till Straumann <strauman@slac.stanford.edu>
PR 1344/bsps:
* clock/ckinit.c: Fix more bugs (applied PR1344/attachment 702):
TSC handler was used when 8254 was requested and vice versa.
Also, nanosecond handler was never installed to RTEMS clock.
2009-09-15 Ralf Corsépius <ralf.corsepius@rtems.org>
* configure.ac: Remove RTEMS_BSP_BOOTCARD_OPTIONS.
2009-08-22 Roxana Leontie <roxana.leontie@gmail.com>
* console/fb_vga.c: improved read/write
2009-08-21 Roxana Leontie <roxana.leontie@gmail.com>
* pc386/console/fb_vga.c: added read/write functionality; added thread
safety to prevent multiple open() operations of the frame buffer device.
2009-08-21 Joel Sherrill <joel.sherrill@OARcorp.com>
* include/bsp.h: Eliminate BSPs defining NUMBER_OF_TERMIOS_PORTS.
Should be automatically handled by confdefs.h or the application.
2009-08-06 Joel Sherrill <joel.sherrill@oarcorp.com>
* include/tm27.h: Remove references to rtems_interrupt_catch since this
archiecture does not use Simple Vectored Interrupt model.
2009-08-03 Roxana Leontie <roxana.leontie@gmail.com>
* console/fb_vga.c: changed the reference to mw_fb.h into fb.h
2009-07-29 Roxana Leontie <roxana.leontie@gmail.com>
* Makefile.am, preinstall.am, console/fb_vga.c: Switch to using
frame_buffer_ naming. Joel cleaned up formatting and removed tabs
that were there long before Roxana touched this file.
* console/fb_vga.h: Removed.
2009-07-24 Roxana Leontie <roxana.leontie@gmail.com>
* console/fb_vga.c: divided fb_screeninfo structure into
fb_var_screeninfo and fb_fix_screeninfo; same with get_screen_info
2009-07-21 Roxana Leontie <roxana.leontie@gmail.com>
* console/fb_vga.c: replaced the ioctl structures with linux
framebuffer equivalents
2009-07-16 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Rename BSP_BOOTCARD_OPTIONS to
RTEMS_BSP_BOOTCARD_OPTIONS. Add RTEMS_BSP_CLEANUP_OPTIONS so all BSPs
have the same options.
2009-07-01 Sebastian Huber <sebastian.huber@embedded-brains.de>
* Makefile.am, preinstall.am: Update for generic interrupt support.
2009-06-17 Joel Sherrill <joel.sherrill@oarcorp.com>
* console/ps2_mouse.c: Fix inconsistent spacing.
2009-06-12 Chris Johns <chrisj@rtems.org>
* ide/ide.c: Format the data output in DEBUG mode.
2009-05-30 Chris Johns <chrisj@rtems.org>
* ide/ide.c: Add initialisation code to reset the IDE devices and
to probe them and display their model numbers. Also add code to
display the probing to aid bring up new hardware.
* ide/idecfg.c: Add the --ide-show command to show probing type
accessing when finding devices on the configured IDE buses.
2009-05-29 Roxana Leontie <roxana.leontie@gmail.com>
* Makefile.am, preinstall.am: Install tty_drv.h
2009-05-08 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspgetworkarea.c: Switch from ssize_t to uintptr_t for
bsp_get_work_area() since the work area is larger than a single
allocatable object.
2009-05-06 Joel Sherrill <joel.sherrill@oarcorp.com>
* console/console.c, console/inch.c, ide/ide.c: Fixed warnings.
2009-04-28 Chris Johns <chrisj@rtems.org>
* Makefile.am: Add bspcmdline.c.
* include/bsp.h: Add boot command line interfaces.
* start/start.c: Save the multiboot command line. Pass the command
line to boot_card.
* start/start.S: Update for boot_card command line change.
* startup/bspstart.c: Initialise the command line.
* startup/bspcmdline.c: New.
* console/console.c, ide/idecfg.c: Add boot command line support.
* ide/ide.cfg: Add prints for errors to help resolve problems.
2009-02-11 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac, start/start16.S: Remove duplicate configure option and
add support for the configure time variable BSP_VIDEO_80x50.
2008-12-04 Joel Sherrill <joel.sherrill@oarcorp.com>
* bsp_specs: Move -e start from *link to *startfile to avoid warning
for undefined entry symbol when linking relocatables with binutils
2.19.
2008-12-04 Joel Sherrill <joel.sherrill@OARcorp.com>
PR 1344/bsps
* clock/ckinit.c: Committed code was not final. Corrections.
2008-12-03 Joel Sherrill <joel.sherrill@OARcorp.com>
Michael South <msouth@msouth.org>
PR 1344/bsps
* configure.ac, clock/ckinit.c, timer/timer.c: Add use of TSC for
nanoseconds granularity. i8254 is very slow on some systems. TSC use
is auto-detected by default.
2008-12-02 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspgetworkarea.c: Remove debug prints.
2008-10-02 Joel Sherrill <joel.sherrill@OARcorp.com>
* startup/bspgetworkarea.c: Fix botched edit.
2008-10-02 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspgetworkarea.c: Change size_t to ssize_t on
bsp_get_work_area(). On 16-bit architectures, size_t can be 16-bits
which would limit the work area to 64K.
2008-10-02 Joel Sherrill <joel.sherrill@OARcorp.com>
* Makefile.am: Turn = into +=.
2008-10-01 Ralf Corsépius <ralf.corsepius@rtems.org>
* Makefile.am: Eliminate bsp.am. Build startup files as side-effect
of building libbspstart.a, using automake-rules.
2008-09-30 Ralf Corsépius <ralf.corsepius@rtems.org>
* clock/ckinit.c: include "../../../shared/clockdrv_shell.h".
* Makefile.am: Reflect changes above.
2008-09-29 Ralf Corsépius <ralf.corsepius@rtems.org>
* Makefile.am: Eliminate *_SOURCES.
2008-09-29 Ralf Corsépius <ralf.corsepius@rtems.org>
* Makefile.am: Move noinst_LIBRARIES = libbsp.a before its
components.
2008-09-26 Ralf Corsépius <ralf.corsepius@rtems.org>
* Makefile.am: Cleanup ../../shared/include/bootcard.h handling.
2008-09-24 Ralf Corsépius <ralf.corsepius@rtems.org>
* Makefile.am: Cosmetics.
2008-09-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Make letting boot_card() handle work area allocation
mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to
BSP_BOOTCARD_OPTIONS.
2008-09-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspclean.c: Removed.
2008-09-22 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspreset.c: New file.
2008-09-22 Joel Sherrill <joel.sherrill@oarcorp.com>
* Makefile.am, configure.ac, console/inch.c, console/keyboard.c,
include/bsp.h: Use standardized bsp_cleanup() which can optionally
print a message, poll for user to press key, and call bsp_reset().
Using this eliminates the various bsp_cleanup() implementations which
had their own implementation and variety of string constants.
2008-09-18 Joel Sherrill <joel.sherrill@oarcorp.com>
* Makefile.am, configure.ac, startup/bspstart.c, startup/linkcmds: Add
bsp_get_work_area() implementation and use more of the BSP
Initialization Framework.
* startup/bspgetworkarea.c: New file.
2008-09-18 Joel Sherrill <joel.sherrill@oarcorp.com>
* include/bsp.h: Eliminate definitions of BSP_LIBIO_MAX_FDS since this
is NOT used anywhere.
2008-09-16 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspstart.c: Remove unnecessary includes of
rtems/libcsupport.h and rtems/libio.h.
2008-09-06 Ralf Corsépius <ralf.corsepius@rtems.org>
* ide/ide.c: Convert to "bool".
2008-09-05 Ralf Corsépius <ralf.corsepius@rtems.org>
* console/console.c: Remove bogus decl.
* timer/timer.c: Convert to "bool".
2008-09-02 Ralf Corsépius <ralf.corsepius@rtems.org>
* clock/rtc.c, console/inch.c, ne2000/ne2000.c, timer/timer.c:
Eliminate rtems_boolean.
2008-08-31 Joel Sherrill <joel.sherrill@oarcorp.com>
* timer/timer.c: Eliminate empty function from every benchmark timer
driver. Fix spelling.
2008-08-31 Joel Sherrill <joel.sherrill@oarcorp.com>
* timer/timer.c: Rename timer driver methods to follow RTEMS
programming conventions.
2008-08-22 Joel Sherrill <joel.sherrill@oarcorp.com>
* Makefile.am: Now named bspclean.c
2008-08-21 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspclean.c: New file.
* startup/exit.c: Removed.
2008-08-19 Joel Sherrill <joel.sherrill@OARcorp.com>
* console/ps2_mouse.c: Fix ps2 mouse interrupt.
2008-08-19 Joel Sherrill <joel.sherrill@OARcorp.com>
* clock/ckinit.c, console/serial_mouse.c, ne2000/ne2000.c,
startup/bspstart.c: Fix warnings for prototypes, types, etc.
2008-08-18 Ralf Corsépius <ralf.corsepius@rtems.org>
* console/mouse_parser.c, console/mouse_parser.h, console/outch.c:
Add missing prototypes.
* console/ps2_mouse.c, timer/timer.c: Add missing prototypes.
2008-07-29 Chris Johns <chrisj@rtems.org>
* ide/ide.c: Updated to the rtems_* libblock changed.
2008-05-23 Joel Sherrill <joel.sherrill@OARcorp.com>
* console/console.c, console/serial_mouse.c: Eliminate copies of
switches to convert termios Bxxx constants to xxx as an integer. Use
the shared termios_baud_to_number() routine to do the same
conversion.
2008-05-15 Joel Sherrill <joel.sherrill@OARcorp.com>
* startup/bspstart.c: Add capability for bootcard.c BSP Initialization
Framework to ask the BSP where it has memory for the RTEMS Workspace
and C Program Heap. These collectively are referred to as work area.
If the BSP supports this, then it does not have to include code to
split the available memory between the two areas. This reduces the
amount of code in the BSP specific bspstart.c file. Additionally, the
shared framework can initialize the C Library, call
rtems_debug_enable(), and dirty the work area memory. Until most/all
BSPs support this new capability, if the BSP supports this, it should
call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac.
When the transition is complete, this autoconf macro can be removed.
2008-05-12 Joel Sherrill <joel.sherrill@OARcorp.com>
* startup/bspstart.c: Refactored and renamed initialization routines to
rtems_initialize_data_structures, rtems_initialize_before_drivers,
rtems_initialize_device_drivers, and
rtems_initialize_start_multitasking. This opened the sequence up so
that bootcard() could provide a more robust and flexible framework
which is easier to explain and understand. This also lays the
groundwork for sharing the division of available memory between the
RTEMS workspace and heap and the C library initialization across all
BSPs.
2008-05-06 Joel Sherrill <joel.sherrill@OARcorp.com>
* configure.ac: Remove spurious line.
2008-04-23 Joel Sherrill <joel.sherrill@OARcorp.com>
* console/ps2_mouse.c, console/serial_mouse.c: Remove all references to
console_reserve_resources and termios_reserve_resources.
2008-04-17 Joel Sherrill <joel.sherrill@oarcorp.com>
* Makefile.am: Do not use intermediate .rel files unless from libcpu or
a network driver. This simplifies the Makefile.am and avoids pulling
in unneeded code.
2008-03-22 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac, startup/exit.c: Add BSP_PRESS_KEY_FOR_RESET
configuration option. When this is set to one, a clean exit of an
application will result in the BSP resetting the hardware without
waiting for a human to press a key.
* start/start.S, startup/linkcmds: Replace the linkcmds with a
version very closely based upon the default in binutils 2.18 for
this target. This eliminated weird failures with C++ dtors even
in C applications. We had an extra _ on a symbol used in start.S.
2008-03-12 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fix typo.
2008-03-03 Joel Sherrill <joel.sherrill@OARcorp.com>
* startup/linkcmds: Add wildcard to gcc_except_table section so
programs compiled with gcc 4.3.x can link.
2008-02-07 Joel Sherrill <joel.sherrill@oarcorp.com>
* clock/ckinit.c: Rework clock driver to use template and to provide
nanoseconds since last tick capability.
2007-12-11 Joel Sherrill <joel.sherrill@OARcorp.com>
* clock/ckinit.c, include/bsp.h, startup/bspstart.c: Eliminate copies
of the Configuration Table. Use the RTEMS provided accessor macros to
obtain configuration fields.
2007-12-04 Joel Sherrill <joel.sherrill@OARcorp.com>
* include/bsp.h, startup/bspstart.c: Move interrupt_stack_size field
from CPU Table to Configuration Table. Eliminate CPU Table from all
ports. Delete references to CPU Table in all forms.
2007-12-03 Joel Sherrill <joel.sherrill@OARcorp.com>
* Makefile.am, startup/bspstart.c: Moved most of the remaining CPU
Table fields to the Configuration Table. This included
pretasking_hook, predriver_hook, postdriver_hook, idle_task,
do_zero_of_workspace, extra_mpci_receive_server_stack,
stack_allocate_hook, and stack_free_hook. As a side-effect of this
effort some multiprocessing code was made conditional and some style
clean up occurred.
2007-11-26 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspstart.c: Eliminate the interrupt_table_segment and
interrupt_table_offset fields in the i386 CPU Table since they are
never read.
2007-09-12 Joel Sherrill <joel.sherrill@OARcorp.com>
PR 1257/bsps
* console/inch.c, console/keyboard.c, console/pc_keyb.c, console/vt.c:
Code outside of cpukit should use the public API for
rtems_interrupt_disable/rtems_interrupt_enable. By bypassing the
public API and directly accessing _CPU_ISR_Disable and
_CPU_ISR_Enable, they were bypassing the compiler memory barrier
directive which could lead to problems. This patch also changes the
type of the variable passed into these routines and addresses minor
style issues.
2007-09-10 Joel Sherrill <joel.sherrill@OARcorp.com>
* console/vt.c: Changed tabs to spaces.
2007-09-10 Joel Sherrill <joel.sherrill@OARcorp.com>
* console/keyboard.c: Replaced tabs with spaces.
2007-09-07 Joel Sherrill <joel.sherrill@oarcorp.com>
* startup/bspstart.c: If we cannot find enough memory to run the
program, generate a fatal error and print a message.
2007-06-20 Joel Sherrill <joel.sherrill@OARcorp.com>
* ne2000/ne2000.c: Fix spelling error.
2007-05-28 Joel Sherrill <joel.sherrill@OARcorp.com>
* startup/bspstart.c: Eliminate maximum_drivers configuration parameter
since it was used to configure a no longer used feature. Device names
are now part of the filesystem not in a table.
2007-05-28 Joel Sherrill <joel.sherrill@OARcorp.com>
PR 1244/bsps
* console/console.c: Remove definition of __assert.
2007-04-12 Ralf Corsépius <ralf.corsepius@rtems.org>
* bsp_specs: Remove qrtems_debug.
2007-04-02 Joel Sherrill <joel@OARcorp.com>
* clock/ckinit.c: Eliminate TOD_Ticks_per_second variable.
2007-03-31 Ralf Corsépius <ralf.corsepius@rtems.org>
* ne2000/ne2000.c (ne_interrupt_handler): Avoid warning.
2007-03-30 Ralf Corsépius <ralf.corsepius@rtems.org>
* ne2000/ne2000.c: Remove typecast.
2007-03-11 Joel Sherrill <joel@OARcorp.com>
* startup/bspstart.c: Remove assignments of
Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default
value in boot_card.c
2007-01-29 Ralf Corsépius <ralf.corsepius@rtems.org>
* console/fb_vga.c: Eliminate __u16, __u32.
2006-12-15 Ralf Corsépius <ralf.corsepius@rtems.org>
* 3c509/3c509.c, ne2000/ne2000.c, wd8003/wd8003.c: Use
ioctl_command_t as arg in ioctl-functions.
2006-12-13 Alexey Shamrin <shamrin@gmail.com>
PR 1189/bsps
* console/outch.c: If you print a character with the code larger than
127 (extended ASCII) to the VGA console, then it blinks. The reason:
char == signed char, so such characters get represented by negative
numbers. The sign bit then goes to attribute byte, resulting in the
blinking.
2006-12-02 Ralf Corsépius <ralf.corsepius@rtems.org>
* configure.ac: New BUG-REPORT address.
2006-11-15 Joel Sherrill <joel@OARcorp.com>
* Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
file and simplified initialization.
2006-10-17 Ralf Corsépius <ralf.corsepius@rtems.org>
* Makefile.am: Remove superfluous -DASM.
2006-10-17 Ralf Corsépius <ralf.corsepius@rtems.org>
* configure.ac: Require autoconf-2.60. Require automake-1.10.
2006-09-11 Joel Sherrill <joel@OARcorp.com>
* console/fb_vga.c, console/kd.h: Convert C++ style comments to C
style.
2006-09-04 Till Straumann <strauman@slac.stanford.edu>
* startup/bspstart.c, start/start.S: Since the crude
memory autodetection code can easily fail (boards with
'reserved' regions - I experienced a hard lockup on a
dell precision 490 when writing past the bios-reported
memory size) I added code that a) tries to save
and use multiboot info, if present b) allows applications
to override/set memory size via a weak alias.
2006-09-04 Till Straumann <strauman@slac.stanford.edu>
* startup/linkcmds: added *(.text.*) *(.data.*) *(.bss.*)
2006-02-01 Joel Sherrill <joel@OARcorp.com>
* configure.ac, console/console.c: Add USE_COM1_AS_CONSOLE BSP option.
This makes it easy to build the pc386 BSP in a configuration that
corresponds to qemu with COM1 redirected to stdio.
2006-01-11 Ralf Corsepius <ralf.corsepius@rtems.org>
* configure.ac: Remove explicit ampolish3 support (now in
RTEMS_BSP_CONFIGURE).
2006-01-10 Ralf Corsepius <ralf.corsepius@rtems.org>
* configure.ac: Add ampolish3 support.
* Makefile.am: Add preinstall.am.
2005-11-06 Ralf Corsepius <ralf.corsepius@rtems.org>
* timer/timer.c: Remove C++-style comments.
2005-11-02 Till Straumann <strauman@slac.stanford.edu>
PR 832/bsps
* startup/ldsegs.S: put IDT and GDT into data segment.
The CPU modifies the 'accessed' bit and GDB's (rtems-gdb-stub)
text segment checksum comparison failed...
2005-10-17 Ralf Corsepius <ralf.corsepius@rtems.org>
* console/fb_vga.h, console/kd.h, console/ps2_drv.h,
console/serial_mouse.c, console/serial_mouse.h: Remove CVS Log.
2005-10-17 Ralf Corsepius <ralf.corsepius@rtems.org>
* Makefile.am: Install/preinstall headers from ../../i386/shared.
2005-09-29 Thomas Doerfler <Thomas.Doerfler@imd-systems.de>
PR 649/filesystem
* ide/idecfg.c: added configuration items for primary/secondary
IDE interface
* configure.ac: added configuration items for primary/secondary
IDE interface
2005-09-19 Ralf Corsepius <ralf.corsepius@rtems.org>
* 3c509/3c509.c: Remove [$]Log.
Include <errno.h> instead of <sys/errno.h>.
2005-08-23 Karel Gardas <kgardas@objectsecurity.com>>
* timer/timer.c: Enhance to use either interupt-based timer
functions on older CPUs or to use TSC-based timer functions on
more recent (Pentium and above) CPUs. The decision is made in
Timer_initialize function when it is called for the first time
based on a result obtained from cpuid instruction during the BSP
initialization phase. During the first call, there are also late
bindings to the implementation functions initialized to
appropriate values.
2005-08-18 Karel Gardas <kgardas@objectsecurity.com>
* startup/bspstart.c: Initialize PCI bus in bsp_start function.
2005-07-18 Lars Munch <lars@segv.dk>
PR 813/networking
* ne2000/ne2000.c: The ne2000 driver on pc386 has been broken since a
parameter was added to irq handlers (2005-04-18). Before these
changes the argument to the interrupt handler was the interrupt
number, now the argument is handle, but the ne2000 driver needs the
interrupt number. The fix is to set the handle to the interrupt
number.
2005-07-06 Ralf Corsepius <ralf.corsepius@rtems.org>
* console/keyboard.c: Apply CHAR_BIT to compute BITS_PER_LONG.
2005-05-26 Ralf Corsepius <ralf.corsepius@rtems.org>
* include/bsp.h: New header guard.
2005-05-06 Jennifer Averett <jennifer.averett@oarcorp.com>
* 3c509/3c509.c, clock/ckinit.c, console/console.c, console/fb_vga.c,
console/inch.c, console/ps2_mouse.c, console/serial_mouse.c,
ne2000/ne2000.c, timer/timer.c, wd8003/wd8003.c: Moved irq.h to bsp
subdirectory.
2005-05-03 Jennifer Averett <jennifer.averett@oarcorp.com>
* 3c509/3c509.c, ne2000/ne2000.c: Modified parameters to
remove warnings.
* console/console.c, wd8003/wd8003.c: Added support for
addition of parameter in ISRs.
2005-04-26 Joel Sherrill <joel@OARcorp.com>
* 3c509/3c509.c, wd8003/wd8003.c: Eliminate warnings.
2005-04-18 Eric Valette <eric.valette@free.fr>
* clock/ckinit.c, console/console.c, console/ps2_mouse.c,
console/serial_mouse.c, timer/timer.c: Added parameter to irq handler
2005-02-18 Joel Sherrill <joel@OARcorp.com>
* console/keyboard.h: Add include file and cleanup file header.
2005-01-22 Ralf Corsepius <ralf.corsepius@rtems.org>
* clock/todcfg.c: size_t RTC_Count.
2005-01-18 Ralf Corsepius <ralf.corsepius@rtems.org>
* console/vgainit.c: static graphic_on|off.
2005-01-07 Ralf Corsepius <ralf.corsepius@rtems.org>
* Makefile.am: Eliminate CFLAGS_OPTIMIZE_V.
2005-01-04 Joel Sherrill <joel@OARcorp.com>
* console/keyboard.c, console/ps2_mouse.c, console/vt.c: Remove
warnings.
2005-01-02 Ralf Corsepius <ralf.corsepius@rtems.org>
* Makefile.am: Remove build-variant support.
2004-11-20 Thomas Doerfler <Thomas.Doerfler@imd-systems.de>
PR 703/filesystem
* ide/ide.c: Extend the "modes_available" and "mode_active" parameters
to uint16_t for UDMA support.
2004-10-13 Eric Norum <norume@aps.anl.gov>
PR 688/bsps
* Makefile.am clock/todcfg.c: Add support for MC146818A TOD chip.
2004-09-24 Ralf Corsepius <ralf.corsepius@rtems.org>
* configure.ac: Require automake > 1.9.
2004-07-25 Joel Sherrill <joel@OARcorp.com>
* 3c509/3c509.c: Add <sys/errno.h>.
* startup/linkcmds: Add .jcr section.
2004-05-21 Till Strauman <strauman@slac.stanford.edu>
* PR 624/bsps
startup/bspstart.c: When probing the memory, make sure not to
corrupt the application. Only probe addresses beyond rtemsFreeMemStart.
* Let IBMPC_outch() convert LF -> CRLF to avoid printk scrambling
the screen.
2004-05-21 Joel Sherrill <joel@OARcorp.com>
* ne2000/ne2000.c, wd8003/wd8003.c: Include errno.h as a consequence of
recent updates to BSD header files.
2004-04-23 Ralf Corsepius <ralf.corsepius@rtems.org>
PR 610/bsps
* Makefile.am: Add include/tm27.h, Cosmetics.
* include/tm27.h: Final cosmetics.
2004-04-22 Ralf Corsepius <ralf.corsepius@rtems.org>
* include/bsp.h: Split out tmtest27 support.
* include/tm27.h: New.
2004-04-21 Ralf Corsepius <ralf.corsepius@rtems.org>
PR 613/bsps
* include/bsp.h: Remove MAX_LONG_TEST_DURATION.
2004-04-21 Ralf Corsepius <ralf.corsepius@rtems.org>
PR 614/bsps
* include/bsp.h: Remove MAX_SHORT_TEST_DURATION (Unused).
2004-04-14 Ralf Corsepius <ralf.corsepius@rtems.org>
* configure.ac: Add RTEMS_ROOT (HACK: This is the last file c/src
which still uses RTEMS_ROOT).
2004-04-02 Ralf Corsepius <ralf.corsepius@rtems.org>
* start/start.S: Include <rtems/asm.h> instead of <asm.h>.
* timer/timerisr.S: Include <rtems/asm.h> instead of <asm.h>.
2004-04-01 Ralf Corsepius <ralf.corsepius@rtems.org>
* startup/ldsegs.S: Include <rtems/asm.h> instead of <asm.h>.
* include/bsp.h: Include <rtems/clockdrv.h> instead of <clockdrv.h>.
* include/bsp.h: Include <rtems/console.h> instead of <console.h>.
* include/bsp.h: Include <rtems/iosupp.h> instead of <iosupp.h>.
2004-03-31 Ralf Corsepius <ralf.corsepius@rtems.org>
* clock/ckinit.c, clock/rtc.c, console/inch.c, ide/ide.c,
include/bsp.h, startup/bspstart.c, timer/timer.c: Convert to using
c99 fixed size types.
2004-02-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Don't install *.rels. Reflect changes to bsp.am.
Preinstall dist_project_lib*.
2004-02-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Explicitly check for OBJCOPY.
2004-02-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Reflect changes to bsp.am.
2004-02-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Reflect changes to bsp.am.
2004-02-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Use CPPASCOMPILE instead of CCASCOMPILE.
2004-02-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Add start*.bin to CLEANFILES.
2004-02-06 Joel Sherrill <joel@OARcorp.com>
* Makefile.am: Split startup into multiple .rels without reorganizing
the source.
2004-02-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Add missing $ in reference to 3c509.rel.
2004-02-03 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Merge-in 3c509/Makefile.am, clock/Makefile.am,
console/Makefile.am, ide/Makefile.am, ne2000/Makefile.am,
startup/Makefile.am, timer/Makefile.am, wd8003/Makefile.am,
wrapup/Makefile.am. Use automake compilation rules.
* 3c509/Makefile.am, clock/Makefile.am, console/Makefile.am,
ide/Makefile.am, ne2000/Makefile.am, startup/Makefile.am,
timer/Makefile.am, wd8003/Makefile.am, wrapup/Makefile.am: Remove.
* configure.ac: Reflect changes above.
* start/start.S: Change comment to make it gcc -ansi compliant.
2004-01-28 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Add nostdinc to AUTOMAKE_OPTIONS.
Add RTEMS_PROG_CCAS.
2004-01-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Add PREINSTALL_DIRS.
* console/Makefile.am: Add PREINSTALL_DIRS.
* wrapup/Makefile.am: Reflect changes to libcpu.
2004-01-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Re-add dirstamps to PRE/TMPINSTALL_FILES.
Add PRE/TMPINSTALL_FILES to CLEANFILES.
* console/Makefile.am: Ditto.
* startup/Makefile.am: Ditto.
2004-01-07 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* start/Makefile.am: Remove.
* Makefile.am: Merge-in start/Makefile.am.
* configure.ac: Reflect changes above.
2004-01-05 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* wrapup/Makefile.am: Eliminate $(LIB).
Use noinst_DATA to trigger building libbsp.a.
2003-12-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* start/Makefile.am: Build $(ARCH)/start16$(LIB_VARIANT).bin.
2003-12-13 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* start/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
* startup/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
2003-12-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* console/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* start/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
* startup/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
2003-12-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Require automake >= 1.8, autoconf >= 2.59.
2003-12-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* wrapup/Makefile.am: Cosmetics.
2003-12-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Misc cleanups and fixes.
* start/Makefile.am: Misc cleanups and fixes.
* startup/Makefile.am: Misc cleanups and fixes.
* wrapup/Makefile.am: Misc cleanups and fixes.
2003-12-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* ide/Makefile.am: PGM = ide.rel.
2003-12-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Add preinstallation dirstamp support.
* 3c509/Makefile.am: Cosmetics.
* clock/Makefile.am: Cosmetics.
* console/Makefile.am: Add preinstallation dirstamp support.
* ide/Makefile.am: Cosmetics.
* ne2000/Makefile.am: Cosmetics.
* start/Makefile.am: Add compilation dirstamp support.
* startup/Makefile.am: Cosmetics.
* timer/Makefile.am: Cosmetics.
* wd8003/Makefile.am: Cosmetics.
* wrapup/Makefile.am: Cosmetics.
2003-12-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* 3c509/Makefile.am: Remove all-local: $(ARCH).
* clock/Makefile.am: Remove all-local: $(ARCH).
* console/Makefile.am: Remove all-local: $(ARCH).
* ide/Makefile.am: Remove all-local: $(ARCH).
* ne2000/Makefile.am: Remove all-local: $(ARCH).
* start/Makefile.am: Remove all-local: $(ARCH).
* startup/Makefile.am: Remove all-local: $(ARCH).
* timer/Makefile.am: Remove all-local: $(ARCH).
* wd8003/Makefile.am: Remove all-local: $(ARCH).
* wrapup/Makefile.am: Remove all-local: $(ARCH).
2003-10-02 Till Strauman <strauman@slac.stanford.edu>
PR 502/bsps
* console/outch.c: Add support for a few ANSI escape sequences to make
libetcl happy.
2003-09-29 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Merge-in include/Makefile.am.
Reflect changes to bsp.am.
* include/Makefile.am: Remove.
* configure.ac: Reflect changes above.
2003-09-08 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* bsp_specs: Remove *lib:.
2003-09-04 Joel Sherrill <joel@OARcorp.com>
* clock/ckinit.c, clock/rtc.c, console/console.c, console/inch.c,
console/outch.c, ide/ide.c, include/bsp.h, include/crt.h,
ne2000/ne2000.c, start/start.S, startup/bspstart.c, startup/exit.c,
startup/ldsegs.S, startup/linkcmds, timer/timer.c, timer/timerisr.S:
URL for license changed.
2003-08-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
PR 461/bsps
* start/Makefile.am: Correct generation of startup16.bin.
2003-08-20 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* ide/Makefile.am: Don't include @RTEMS_BPS@.cfg.
2003-08-18 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Reflect having moved aclocal/.
2003-08-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Reflect having moved automake/.
* 3c509/Makefile.am: Reflect having moved automake/.
* clock/Makefile.am: Reflect having moved automake/.
* console/Makefile.am: Reflect having moved automake/.
* ide/Makefile.am: Reflect having moved automake/.
* include/Makefile.am: Reflect having moved automake/.
* ne2000/Makefile.am: Reflect having moved automake/.
* start/Makefile.am: Reflect having moved automake/.
* startup/Makefile.am: Reflect having moved automake/.
* timer/Makefile.am: Reflect having moved automake/.
* wd8003/Makefile.am: Reflect having moved automake/.
* wrapup/Makefile.am: Reflect having moved automake/.
2003-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
PR 452/bsps
* startup/Makefile.am: Remove USE_INIT_FINI.
2003-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Use rtems-bugs@rtems.com as bug report email address.
2003-08-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
PR 445/bsps
* bsp_specs: Remove -D__embedded__ -Asystem(embedded) from cpp.
Remove cpp, old_cpp (now unused).
2003-07-08 Joel Sherrill <joel@OARcorp.com>
* console/console.c: Correct typo.
2003-05-08 Chris Johns <cjohns@cybertec.com.au>
* HOWTO:
Updated the GRUB version info and how to build GRUB from source.
Added how to boot over the network with a PXE Netboot BIOS.
2003-04-14 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* ide/.cvsignore: New.
2003-03-25 Thomas Doerfler <Thomas.Doerfler@imd-systems.de>
PR 368/filesystems
* startup/ldsegs.S: Increase alignment.
* Makefile.am, configure.ac, include/bsp.h, wrapup/Makefile.am:
Added IDE supporting infrastructure.
* ide/Makefile.am, ide/ide.c, ide/idecfg.c: New files. Added
BSP support for libchip standard ide driver.
2003-03-06 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Remove AC_CONFIG_AUX_DIR.
2003-02-20 Till Straumann <strauman@slac.stanford.edu>
PR 353/bsps
* include/bsp.h: Let the application override the network driver
and attach routine.
2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
2003-02-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: AC_PREREQ(2.57).
2003-01-20 Joel Sherrill <joel@OARcorp.com>
* startup/linkcmds: Add FreeBSD SYSCTL() sections for networking.
2003-01-15 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* 3c509/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* ne2000/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
* wd8003/Makefile.am: Don't include @RTEMS_BSP@.cfg.
2002-12-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* start/Makefile.am: Use install-data-local to install startfile.
2002-12-10 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
2002-11-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Remove RTEMS_OUTPUT_BUILD_SUBDIRS.
2002-10-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* .cvsignore: Reformat.
Add autom4te*cache.
Remove autom4te.cache.
2002-09-13 Eric Norum <eric.norum@usask.ca>
* start/start16.S: Remove unwanted + at beginning of relative
numeric label.
2002-09-08 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Remove duplicate timer/Makefile in AC_CONFIG_FILES.
2002-08-29 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* console/Makefile.am: Add $(PROJECT_INCLUDE)/rtems to
PREINSTALL_FILES.
* console/mouse_parser.c: Include <string.h> (for strcmp).
* console/vt.c: Include <string.h> (for memcpy).
* wd8003/wd8003.c: Include <string.h> (for memcpy, memset).
2002-08-21 Joel Sherrill <joel@OARcorp.com>
* bsp_specs: Added support for -nostdlibs.
2002-08-14 Joel Sherrill <joel@OARcorp.com>
* start/start16.S: Per PR259, added code to test for video present
before touching the adapter. Eric Norum <eric.norum@usask.ca>
tested this patch.
2002-08-12 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* console/ps2_mouse.c: Include <string.h> (for abort/exit).
2002-08-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* 3c509/Makefile.am: Use .$(OBJEXT) instead of .o.
* clock/Makefile.am: Use .$(OBJEXT) instead of .o.
* console/Makefile.am: Use .$(OBJEXT) instead of .o.
* ne2000/Makefile.am: Use .$(OBJEXT) instead of .o.
* start/Makefile.am: Use .$(OBJEXT) instead of .o.
* startup/Makefile.am: Use .$(OBJEXT) instead of .o.
* timer/Makefile.am: Use .$(OBJEXT) instead of .o.
* wd8003/Makefile.am: Use .$(OBJEXT) instead of .o.
* wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
2002-07-30 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* startup/ldsegs.S: #include <asm.h>.
* include/bsp.h: Remove _IBMPC_chrdy (is not a public function).
Remove printk (Now in bspIo.h).
2002-07-20 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* start/Makefile.am: Eliminate PGM.
Add bsplib_DATA = $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o.
Add bsplib_DATA += $(PROJECT_RELEASE)/lib/start16$(LIB_VARIANT).bin.
2002-07-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* startup/Makefile.am: Add bsplib_DATA = linkcmds.
2002-07-16 Eric Norum <eric.norum@usask.ca>
* console/console.c: Others on the rtems-users list have expressed
concern about this run-time selection, so I've enclosed the changes
in a #ifdef RTEMS_RUNTIME_CONSOLE_SELECT conditional.
2002-07-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* wrapup/Makefile.am: Eliminate TMPINSTALL_FILES.
Remove $(OBJS) from all-local.
2002-06-29 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* wrapup/Makefile.am: Remove preinstallation of libbsp.a,
2001-05-09 Joel Sherrill <joel@OARcorp.com>
* startup/linkcmds: In support of gcc 3.1, added one of more
of the sections .jcr, .rodata*, .data.*, .gnu.linkonce.s2.*,
.gnu.linkonce.sb2.*, and .gnu.linkonce.s.*. Spacing corrections
and direction of segments to memory regions may also have been
addressed. This was a sweep across all BSPs.
2002-03-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac:
AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
AM_INIT_AUTOMAKE([no-define foreign 1.6]).
* 3c509/Makefile.am: Remove AUTOMAKE_OPTIONS.
* Makefile.am: Remove AUTOMAKE_OPTIONS.
* clock/Makefile.am: Remove AUTOMAKE_OPTIONS.
* console/Makefile.am: Remove AUTOMAKE_OPTIONS.
* include/Makefile.am: Remove AUTOMAKE_OPTIONS.
* ne2000/Makefile.am: Remove AUTOMAKE_OPTIONS.
* start/Makefile.am: Remove AUTOMAKE_OPTIONS.
* startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
* timer/Makefile.am: Remove AUTOMAKE_OPTIONS.
* wd8003/Makefile.am: Remove AUTOMAKE_OPTIONS.
* wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.
2002-03-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* PR139
* configure.ac: Remove stray ';', breaks building with automake-1.6.
2002-01-03 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* include/bsp.h: Include rtems/bspIo.h instead of bspIo.h.
2001-12-22 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu,
replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g.
2001-11-30 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.ac: Introduce RTEMS_BSP_CONFIGURE.
2001-10-12 Joel Sherrill <joel@OARcorp.com>
* console/inch.c: Fixed typo.
2001-10-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* .cvsignore: Add autom4te.cache for autoconf > 2.52.
* configure.in: Remove.
* configure.ac: New file, generated from configure.in by autoupdate.
2001-09-27 Joel Sherrill <joel@OARcorp.com>
* include/bsp.h: Renamed delay() to rtems_bsp_delay().
2001-09-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* include/Makefile.am: Use 'CLEANFILES ='.
* include/Makefile.am: Use 'PREINSTALL_FILES ='.
* console/Makefile.am: Use 'PREINSTALL_FILES ='.
* Makefile.am: Use 'TMPINSTALL_FILES ='.
2001-06-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* console/Makefile.am: Remove RTEMS_H_FILES.
* start/start16.S: include <bspopts.h> to get NEW_GAS.
2001-06-19 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.in: Add bspopts.h.
* include/.cvsignore: Add bspopts.h*, stamp-h*.
* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
* 3c509/Makefile.am: Dito.
* console/Makefile.am: Dito.
* include/bsp.h: Include bspopts.h.
2001-05-10 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
2001-04-29 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* ne2000/ne2000.c: Remove #define __INSIDE_RTEMS_BSD_TCPIP_STACK__.
2001-01-05 Joel Sherrill <joel@OARcorp.com>
* console/vt.c: Added include of <rtems.h> so _CPU_ISR_disable
would be visible.
2000-12-05 Eric Valette <valette@crf.canon.fr>
* console/inch.c, console/keyboard.c, console/pc_keyb.c,
console/vt.c, include/bsp.h: Correct incorrect interrupt level
handling in new keyboard management code. Correct
BSP_poll_char initialization routine.
* start/start.S, startup/bspstart.c: Correct when the video is
initialized.
* timer/timer.c (Calibrate_1ms_loop): Address problem where this
did not work correctly on all PC speeds. The new calibrate routine
has been tested on Pentium 166, pentium II 200, pentium III
300 Mhz and does work as expected.
2000-12-05 Joel Sherrill <joel@OARcorp.com>
* pc386/console/console.c, pc386/console/serial_mouse.c,
pc386/console/vgainit.c, shared/comm/tty_drv.c: Remove warnings.
2000-11-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
2000-11-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
2000-11-01 Joel Sherrill <joel@OARcorp.com>
* startup/bspstart.c: assoc.h, error.h, libio_.h, libio.h,
and libcsupport.h moved from libc to lib/include/rtems and
now must be referenced as <rtems/XXX.h>. Header file order
was cleaned up while doing this.
2000-10-29 Joel Sherrill <joel@OARcorp.com>
* startup/sbrk.c: Removed. Redundant with shared version.
2000-10-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* configure.in, Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
Switch to GNU canonicalization.
2000-10-23 Joel Sherrill <joel@OARcorp.com>
* console/serial_mouse.c: Fixed typos introduced by removal of CR/LF.
2000-10-20 Rosimildo da Silva <rdasilva@connecttel.com>
* console/serial_mouse.c: Added support for changing serial parameters.
2000-10-20 Joel Sherrill <joel@OARcorp.com>
* include/wd80x3.h: Added file header and logic to prevent multiple
inclusions of this file.
* wd8003/wd8003.c: Corrected attach to include "int attach" parameter.
2000-10-20 Joel Sherrill <joel@OARcorp.com>
* include/bsp.h: Cleaned up network driver name and attach defines.
2000-10-20 Dmitry Kargapolov <dk@gentex.ru>
* ne2000/ne2000.c: Fix some errors in the driver.
1. There was no sufficient check of data in ethernet header.
The code in ne_rx_daemon() was:
inport_word (dport, len);
...
len -= 4;
...
if (len > 0)
ne_read_data (sc, startaddr, len, p);
Unfortunately, sometimes my NIC gave me too big len value,
the result was memory override. To fix this, I added ethernet
header data checking.
2. The way overrides were serviced was not good. It was complex
but sometimes did not provide reliable continuing of NIC working.
I had the situation of an endless loop in ne_check_status()
after override processing.
3. There was conceptual error of porting. The old method of
overrides curing was ported from the OS-s, where override-processing
did start immediately. But RTEMS-version uses events, and cleaning
of the overrides can start later.
I selected the way of ne2000 programming that is used
in freebsd kernel (v4.0).
Because of both problems, incorrect data in header of raw packet
and receiver override, it went through ne_reset() and fully
reset the ne2000.
So, in summary
- added detecting of the incorrect data in ethernet header;
- replaced handling of receiver overrides with new scheme,
via resetting of NIC, this method is used also in case of
invalid header detecting.
2000-10-18 Charles-Antoine Gauthier <charles.gauthier@nrc.ca>
* console/console.c, console/serial_mouse.c, include/bsp.h:
Add the ability to set parity, number of data bits and
number of stop bits to the existing i386 serial drivers.
2000-10-17 Joel Sherrill <joel@OARcorp.com>
* startup/Makefile.am: Added idt.c since it has been moved libcpu/i386
to libbsp/i386/shared/irq.
2000-09-29 Charles-Antoine Gauthier <charles.gauthier@nrc.ca>
* startup/linkcmds: Added lines so DWARF debug information
would be available. Otherwise gdb complains that the offsets
for the debug info are incorrect and doesn't load the files.
2000-09-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* start/Makefile.am: Remove AM_CPPFLAGS and GAS_CODE16 conditional.
2000-09-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* 3c509/Makefile.am, clock/Makefile.am, console/Makefile.am,
ne2000/Makefile.am, start/Makefile.am, startup/Makefile.am,
timer/Makefile.am, wd8003/Makefile.am, wrapup/Makefile.am: Include
compile.am
2000-08-30 Joel Sherrill <joel@OARcorp.com>
* console/keyboard.h: Changed numerous routines from extern inline
to static inline.
2000-08-26 Rosimildo da Silva <rdasilva@connecttel.com>
* Major rework of the "/dev/console" driver.
* Added termios support for stdin ( keyboard ).
* Added ioctls() to support modes similar to Linux( XLATE,
RAW, MEDIUMRAW ).
* Added Keyboard mapping and handling of the keyboard's leds.
* Added Micro FrameBuffer driver ( "/dev/fb0" ) for bare VGA
controller ( 16 colors ).
* Added PS/2 and Serial mouse support for PC386 BSP.
* console/defkeymap.c: New file.
* console/fb_vga.c: New file.
* console/fb_vga.h: New file.
* console/i386kbd.h: New file.
* console/kd.h: New file.
* console/keyboard.c: New file.
* console/keyboard.h: New file.
* console/mouse_parser.c: New file.
* console/mouse_parser.h: New file.
* console/pc_keyb.c: New file.
* console/ps2_drv.h: New file.
* console/ps2_mouse.c: New file.
* console/ps2_mouse.h: New file.
* console/serial_mouse.c: New file.
* console/serial_mouse.h: New file.
* console/vgainit.c: New file.
* console/vt.c: New file.
* console/Makefile.am: Reflect new files.
* console/console.c, console/inch.c, console/outch.c: Console
functionality modifications.
* startup/Makefile.am: Pick up tty_drv.c and gdb_glue.c
2000-08-10 Joel Sherrill <joel@OARcorp.com>
* ChangeLog: New file.