blob: 773e6aa2c05b08c6d28305aa6ced18d977d4e0ef (
plain) (
tree)
|
|
#
# $Id$
#
#
# Please send any comments, improvements, or bug reports to:
# Chris Johns
# Objective Design Systems
# 35 Cairo Street
# Cammeray
# Sydney, NSW 2062
# ccj@acm.org
#
#
# This board support package is not a board support package at all, but
# a means to build the RTEMS kernel without using a specific BSP.
#
# You should be able to build to build this BSP for any cpu type.
#
# You must provide the standard BSP type functions and support yourself
# externally to RTEMS.
#
# This BSP is intended to be used by people who fit one or more of the
# categories below :
#
# 1) using custom hardware of little use or interest to others. If you
# intend to use hardware available to others, please create a BSP
# and send to OARCorp.
#
# 2) production code cannot depend on software which can change. BSP code
# can change with-out notice, while RTEMS has very tightly defined
# interfaces which do not change.
#
# 3) the need to extend or change an existing BSP in ways which are not
# of interest to others or the BSP maintainer.
#
# I fit all the above.
#
BSP NAME: bare
BOARD: not applicable
BUS: not applicable
CPU FAMILY: all
COPROCESSORS: not applicable
MODE: not applicable
DEBUG MONITOR: not applicable
PERIPHERALS
===========
not applicable
DRIVER INFORMATION
==================
not applicable
STDIO
=====
not applicable
NOTES
=====
Board description
-----------------
not applicable
Host System
-----------
Linux (RedHat 4.0/5.0)
egcs-1.0.2
binutils-2.8.1, with rtems patches
newlib-1.8.0, with rtems patches
Verification
-------------------------------
Single processor tests: not applicable
Multi-processort tests: not applicable
Timing tests:
not applicable
Porting
-------
not applicable
|