blob: 79fa99b39b9a54ba78ef5a500e79ab95f88826c6 (
plain) (
tree)
|
|
/*
* Philips LPC22XX/LPC21xx BSP header file
*
* by Ray,Xu <Rayx.cn@gmail.com>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*/
#ifndef _BSP_H
#define _BSP_H
#ifdef __cplusplus
extern "C" {
#endif
#include <bspopts.h>
#define BSP_SMALL_MEMORY 1
#include <rtems.h>
#include <rtems/iosupp.h>
#include <rtems/console.h>
#include <rtems/clockdrv.h>
#define BSP_FEATURE_IRQ_EXTENSION
#define CONFIG_ARM_CLK 60000000L
/* cclk=cco/(2*P) */
/* cco = cclk*2*P */
/* system clk frequecy,<=60Mhz, defined in system configuration */
#define LPC22xx_Fcclk CONFIG_ARM_CLK
/* Fcco 156M~320Mhz*/
/* system clk frequecy,<=60Mhz, defined in system configuration */
#define LPC22xx_Fcclk CONFIG_ARM_CLK
#define LPC22xx_Fcco LPC22xx_Fcclk * 4
/*VPB clk frequency,1,1/2,1/4 times of Fcclk */
#define LPC22xx_Fpclk (LPC22xx_Fcclk /4) *1
/* Fcclk range: 10MHz ~ MCU allowed frequency */
#define Fcclk_MIN 10000000L
#define Fcclk_MAX 60000000L
/* Fcco range: 156MHz ~ 320MHz */
#define Fcco_MIN 156000000L
#define Fcco_MAX 320000000L
#define PLLFEED_DATA1 0xAA
#define PLLFEED_DATA2 0x55
/* PLL PLLCON register bit descriptions */
#define PLLCON_ENABLE_BIT 0
#define PLLCON_CONNECT_BIT 1
/* PLL PLLSTAT register bit descriptions */
#define PLLSTAT_ENABLE_BIT 8
#define PLLSTAT_CONNECT_BIT 9
#define PLLSTAT_LOCK_BIT 10
/* PM Peripheral Type */
#define PC_TIMER0 0x2
#define PC_TIMER1 0x4
#define PC_UART0 0x8
#define PC_UART1 0x10
#define PC_PWM0 0x20
#define PC_I2C 0x80
#define PC_SPI0 0x100
#define PC_RTC 0x200
// OSC [Hz]
#define FOSC 11059200
// Core clk [Hz]
#define FCCLK FOSC<<2
/**
* help file
*/
/* System configure, Fosc Fcclk Fcco Fpclk must be defined*/
#define Fosc 11059200 // osc freq,10MHz~25MHz,
// change to real one if needed
#define Fcclk (Fosc << 2) //system freq 2^n time of Fosc(1~32) <=60MHZ
#define Fcco (Fcclk <<2) //CCO freq 2,4,8,16 time of Fcclk 156MHz~320MHz
#define Fpclk (Fcclk >>2) * 1 //VPB freq only(Fcclk / 4) 1~4
/* This was M. That is a BAD BAD public constant. I renamed it to
* JOEL_M so it wouldn't conflict with user code. If you can find
* a better name, fix this. But nothing I found uses it.
*/
#define JOEL_M Fcclk / Fosc
#define P_min Fcco_MIN / (2*Fcclk) + 1;
#define P_max Fcco_MAX / (2*Fcclk);
#define UART_BPS 115200
// Time Precision time [us]
#define TIMER_PRECISION 10
// I2C Speed [bit/s]
#define I2CSPEED 20000 // 20 Kbit/s
// Uarts buffers size
#define RXBUFSIZE 32
#define TXBUFSIZE 32
// SPI Speed [bit/s]
#define SPISPEED 1500000 // 1.5 Mbit/s
// SPI EEPROM CS pin (SSEL is not suitable for CS, because is used by SPI module for multi master SPI interface)
#define SPI_CS_PIN P0_13
#define SPI_CS_PIN_FUNC PINSEL0_bit.SPI_CS_PIN
// Flash definition
//#define FLASH_SIZE (0x200000-FLASH_BOOT) // Total area of Flash region in words 8 bit
#define FLASH_SIZE (0x80000-FLASH_BOOT) // Total area of Flash region in words 8 bit
//#define FLASH_SIZE (0x80000-FLASH_BOOT) // Total area of Flash region in words 8 bit
#define FLASH_BEGIN 0x80000000
#define FLASH_BASE (FLASH_BEGIN+FLASH_BOOT) //First 0x8000 bytes reserved for boot loader etc.
// SRAM definition
#define SRAM_SIZE 0x100000 // Total area of Flash region in words 8 bit
#define SRAM_BASE 0x81000000 //First 0x8000 bytes reserved for boot loader etc.
// CS8900A definition
#define CS8900A_BASE 0x82000000
// RTL8019AS definition
#define RTL8019AS_BASE 0x82000000
struct rtems_bsdnet_ifconfig;
int cs8900_driver_attach (struct rtems_bsdnet_ifconfig *config,
int attaching);
/*
* Network driver configuration
*/
#define RTEMS_BSP_NETWORK_DRIVER_NAME "eth0"
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH cs8900_driver_attach
#ifdef __cplusplus
}
#endif
#endif /* _BSP_H */
|
