blob: ca5e3b841166283d2d0c75ddecb4a454b0088a4d (
plain) (
tree)
|
|
/**
* @file
*
* @ingroup lpc24xx
*
* @brief Global BSP definitions.
*/
/*
* Copyright (c) 2008
* Embedded Brains GmbH
* Obere Lagerstr. 30
* D-82178 Puchheim
* Germany
* rtems@embedded-brains.de
*
* The license and distribution terms for this file may be found in the file
* LICENSE in this distribution or at http://www.rtems.com/license/LICENSE.
*/
#ifndef LIBBSP_ARM_LPC24XX_BSP_H
#define LIBBSP_ARM_LPC24XX_BSP_H
#include <bspopts.h>
#include <rtems.h>
#include <rtems/console.h>
#include <rtems/clockdrv.h>
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
#define BSP_FEATURE_IRQ_EXTENSION
#ifndef ASM
struct rtems_bsdnet_ifconfig;
/**
* @defgroup lpc24xx LPC24XX Support
*
* @ingroup bsp_kit
*
* @brief LPC24XX support package.
*
* @{
*/
/**
* @brief Network driver attach and detach function.
*/
int lpc_eth_attach_detach(
struct rtems_bsdnet_ifconfig *config,
int attaching
);
/**
* @brief Standard network driver attach and detach function.
*/
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH lpc_eth_attach_detach
/**
* @brief Standard network driver name.
*/
#define RTEMS_BSP_NETWORK_DRIVER_NAME "eth0"
/**
* @brief Optimized idle task.
*
* This idle task sets the power mode to idle. This causes the processor clock
* to be stopped, while on-chip peripherals remain active. Any enabled
* interrupt from a peripheral or an external interrupt source will cause the
* processor to resume execution.
*
* To enable the idle task use the following in the system configuration:
*
* @code
* #include <bsp.h>
*
* #define CONFIGURE_INIT
*
* #define CONFIGURE_IDLE_TASK_BODY bsp_idle_thread
*
* #include <confdefs.h>
* @endcode
*/
void *bsp_idle_thread(uintptr_t ignored);
#define BSP_CONSOLE_UART_BASE 0xe000c000
void bsp_restart(void *addr);
/** @} */
#endif /* ASM */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* LIBBSP_ARM_LPC24XX_BSP_H */
|
