/*
* Cogent CSB336 startup code
*
* Copyright (c) 2004 by Jay Monkman <jtm@lopingdog.com>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*/
#include <bsp/linker-symbols.h>
/* Some standard definitions...*/
.equ PSR_MODE_USR, 0x10
.equ PSR_MODE_FIQ, 0x11
.equ PSR_MODE_IRQ, 0x12
.equ PSR_MODE_SVC, 0x13
.equ PSR_MODE_ABT, 0x17
.equ PSR_MODE_UNDEF, 0x1B
.equ PSR_MODE_SYS, 0x1F
.equ PSR_I, 0x80
.equ PSR_F, 0x40
.equ PSR_T, 0x20
.text
.globl _start
_start:
/*
* Since I don't plan to return to the bootloader,
* I don't have to save the registers.
*
* I'll just set the CPSR for SVC mode, interrupts
* off, and ARM instructions.
*/
mov r0, #(PSR_MODE_SVC | PSR_I | PSR_F)
msr cpsr, r0
/* zero the bss */
ldr r1, =bsp_section_bss_end
ldr r0, =bsp_section_bss_begin
_bss_init:
mov r2, #0
cmp r0, r1
strlot r2, [r0], #4
blo _bss_init /* loop while r0 < r1 */
/* --- Initialize stack pointer registers */
/* Enter IRQ mode and set up the IRQ stack pointer */
mov r0, #(PSR_MODE_IRQ | PSR_I | PSR_F) /* No interrupts */
msr cpsr, r0
ldr r1, =bsp_stack_irq_size
ldr sp, =bsp_stack_irq_begin
add sp, sp, r1
/* Enter FIQ mode and set up the FIQ stack pointer */
mov r0, #(PSR_MODE_FIQ | PSR_I | PSR_F) /* No interrupts */
msr cpsr, r0
ldr r1, =bsp_stack_fiq_size
ldr sp, =bsp_stack_fiq_begin
add sp, sp, r1
/* Enter ABT mode and set up the ABT stack pointer */
mov r0, #(PSR_MODE_ABT | PSR_I | PSR_F) /* No interrupts */
msr cpsr, r0
ldr r1, =bsp_stack_abt_size
ldr sp, =bsp_stack_abt_begin
add sp, sp, r1
/* Enter UNDEF mode and set up the UNDEF stack pointer */
mov r0, #(PSR_MODE_UNDEF | PSR_I | PSR_F) /* No interrupts */
msr cpsr, r0
ldr r1, =bsp_stack_und_size
ldr sp, =bsp_stack_und_begin
add sp, sp, r1
/* Set up the SVC stack pointer last and stay in SVC mode */
mov r0, #(PSR_MODE_SVC | PSR_I | PSR_F) /* No interrupts */
msr cpsr, r0
ldr r1, =bsp_stack_svc_size
ldr sp, =bsp_stack_svc_begin
add sp, sp, r1
sub sp, sp, #0x64
/*
* Initialize the MMU. After we return, the MMU is enabled,
* and memory may be remapped. I hope we don't remap this
* memory away.
*/
ldr r0, =mem_map
bl mmu_init
/*
* Initialize the exception vectors. This includes the
* exceptions vectors (0x00000000-0x0000001c), and the
* pointers to the exception handlers (0x00000020-0x0000003c).
*/
mov r0, #0
adr r1, vector_block
ldmia r1!, {r2-r9}
stmia r0!, {r2-r9}
ldmia r1!, {r2-r9}
stmia r0!, {r2-r9}
/* Now we are prepared to start the BSP's C code */
mov r0, #0
bl boot_card
/*
* Theoretically, we could return to what started us up,
* but we'd have to have saved the registers and stacks.
* Instead, we'll just reset.
*/
bl bsp_reset
/* We shouldn't get here. If we do, hang */
_hang: b _hang
/*
* This is the exception vector table and the pointers to
* the functions that handle the exceptions. It's a total
* of 16 words (64 bytes)
*/
vector_block:
ldr pc, Reset_Handler
ldr pc, Undefined_Handler
ldr pc, SWI_Handler
ldr pc, Prefetch_Handler
ldr pc, Abort_Handler
nop
ldr pc, IRQ_Handler
ldr pc, FIQ_Handler
Reset_Handler: b bsp_reset
Undefined_Handler: b Undefined_Handler
SWI_Handler: b SWI_Handler
Prefetch_Handler: b Prefetch_Handler
Abort_Handler: b Abort_Handler
nop
IRQ_Handler: b IRQ_Handler
FIQ_Handler: b FIQ_Handler
.globl Reset_Handler
.globl Undefined_Handler
.globl SWI_Handler
.globl Prefetch_Handler
.globl Abort_Handler
.globl IRQ_Handler
.globl FIQ_Handler
