/* ---------------------------------------------------------------------------- */
/* Atmel Microcontroller Software Support */
/* SAM Software Package License */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) 2015, Atmel Corporation */
/* */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following condition is met: */
/* */
/* - Redistributions of source code must retain the above copyright notice, */
/* this list of conditions and the disclaimer below. */
/* */
/* Atmel's name may not be used to endorse or promote products derived from */
/* this software without specific prior written permission. */
/* */
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ---------------------------------------------------------------------------- */
/** \addtogroup afe_dma_module Working with AFE (DMA support)
* \ingroup peripherals_module
* The afec driver provides the interface to configure and use the afecC
* peripheral with DMA support.\n
*
* For more accurate information, please look at the AFEC section of the
* Datasheet.
*
* Related files :\n
* \ref afe_dma.c\n
* \ref afe_dma.h\n
*/
/*@{*/
/*@}*/
/**
* \file
*
*
*/
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include "afe_dma.h"
#include "xdmad.h"
#include <stdint.h>
#include <assert.h>
/* DMA driver instance */
static uint32_t afeDmaRxChannel;
/*----------------------------------------------------------------------------
* Local functions
*----------------------------------------------------------------------------*/
/**
* \brief AFE xDMA Rx callback
* Invoked on AFE DMA reception done.
* \param channel DMA channel.
* \param pArg Pointer to callback argument - Pointer to AfeDma instance.
*/
static void Afe_Rx_Cb(uint32_t channel, AfeDma *pArg)
{
AfeCmd *pAfedCmd = pArg->pCurrentCommand;
if (channel != afeDmaRxChannel)
return;
/* Configure and enable interrupt on RC compare */
NVIC_ClearPendingIRQ(XDMAC_IRQn);
NVIC_DisableIRQ(XDMAC_IRQn);
/* Release the DMA channels */
XDMAD_FreeChannel(pArg->pXdmad, afeDmaRxChannel);
SCB_InvalidateDCache_by_Addr(pAfedCmd->pRxBuff, pAfedCmd->RxSize);
/* Release the dataflash semaphore */
pArg->semaphore++;
/* Invoke the callback associated with the current command */
if (pAfedCmd && pAfedCmd->callback)
pAfedCmd->callback(0, pAfedCmd->pArgument);
}
/**
* \brief Configure the DMA Channels: 0 RX.
* Channels are disabled after configure.
* \param pXdmad Pointer to a AfeDma instance
* \returns 0 if the dma channel configuration successfully; otherwise returns
* AFE_ERROR_XXX.
*/
static uint8_t _AfeConfigureDmaChannels(AfeDma *pAfed)
{
/* Driver initialize */
XDMAD_Initialize(pAfed->pXdmad, 0);
XDMAD_FreeChannel(pAfed->pXdmad, afeDmaRxChannel);
/* Allocate a DMA channel for AFE0/1 RX. */
afeDmaRxChannel =
XDMAD_AllocateChannel(pAfed->pXdmad, pAfed->afeId, XDMAD_TRANSFER_MEMORY);
if (afeDmaRxChannel == XDMAD_ALLOC_FAILED)
return AFE_ERROR;
/* Setup callbacks for AFE0/1 RX */
XDMAD_SetCallback(pAfed->pXdmad, afeDmaRxChannel,
(XdmadTransferCallback)Afe_Rx_Cb, pAfed);
if (XDMAD_PrepareChannel(pAfed->pXdmad, afeDmaRxChannel))
return AFE_ERROR;
return AFE_OK;
}
/**
* \brief Configure the DMA source and destination with Linker List mode.
* \param pXdmad Pointer to a AfeDma instance
* \param pCommand Pointer to AfeCmd instance
* \param AfeCmd Pointer to command
*/
static uint8_t _Afe_configureLinkList(Afec *pAfeHw, void *pXdmad,
AfeCmd *pCommand)
{
uint32_t xdmaCndc, xdmaInt;
sXdmadCfg xdmadRxCfg;
uint32_t afeId;
if ((unsigned int)pAfeHw == (unsigned int)AFEC0) afeId = ID_AFEC0;
if ((unsigned int)pAfeHw == (unsigned int)AFEC1) afeId = ID_AFEC1;
/* Setup RX Link List */
xdmadRxCfg.mbr_ubc = XDMA_UBC_NVIEW_NDV0 |
XDMA_UBC_NDE_FETCH_DIS |
XDMA_UBC_NDEN_UPDATED |
pCommand->RxSize;
xdmadRxCfg.mbr_da = (uint32_t)pCommand->pRxBuff;
xdmadRxCfg.mbr_sa = (uint32_t) & (pAfeHw->AFEC_LCDR);
xdmadRxCfg.mbr_cfg = XDMAC_CC_TYPE_PER_TRAN |
XDMAC_CC_MBSIZE_SINGLE |
XDMAC_CC_DSYNC_PER2MEM |
XDMAC_CC_CSIZE_CHK_1 |
XDMAC_CC_DWIDTH_WORD |
XDMAC_CC_SIF_AHB_IF1 |
XDMAC_CC_DIF_AHB_IF1 |
XDMAC_CC_SAM_FIXED_AM |
XDMAC_CC_DAM_INCREMENTED_AM |
XDMAC_CC_PERID(
XDMAIF_Get_ChannelNumber(afeId, XDMAD_TRANSFER_RX));
xdmadRxCfg.mbr_bc = 0;
xdmadRxCfg.mbr_sus = 0;
xdmadRxCfg.mbr_dus = 0;
xdmaInt = (XDMAC_CIE_BIE |
XDMAC_CIE_DIE |
XDMAC_CIE_FIE |
XDMAC_CIE_RBIE |
XDMAC_CIE_WBIE |
XDMAC_CIE_ROIE);
xdmaCndc = 0;
if (XDMAD_ConfigureTransfer(pXdmad, afeDmaRxChannel,
&xdmadRxCfg, xdmaCndc, 0, xdmaInt))
return AFE_ERROR;
return AFE_OK;
}
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
/**
* \brief Initializes the AfeDma structure and the corresponding AFE & DMA .
* hardware select value.
* The driver will uses DMA channel 0 for RX .
* The DMA channels are freed automatically when no DMA command processing.
*
* \param pAfed Pointer to a AfeDma instance.
* \param pAfeHw Associated Afe peripheral.
* \param AfeId Afe peripheral identifier.
* \param pDmad Pointer to a Dmad instance.
*/
uint32_t Afe_ConfigureDma(AfeDma *pAfed ,
Afec *pAfeHw ,
uint8_t AfeId,
sXdmad *pXdmad)
{
/* Initialize the Afe structure */
pAfed->pAfeHw = pAfeHw;
pAfed->afeId = AfeId;
pAfed->semaphore = 1;
pAfed->pCurrentCommand = 0;
pAfed->pXdmad = pXdmad;
return 0;
}
/**
* \brief Starts a AFE transfer. This is a non blocking function. It will
* return as soon as the transfer is started.
*
* \param pAfed Pointer to a AfeDma instance.
* \param pCommand Pointer to the Afe command to execute.
* \returns 0 if the transfer has been started successfully; otherwise returns
* AFE_ERROR_LOCK is the driver is in use, or AFE_ERROR if the command is not
* valid.
*/
uint32_t Afe_SendData(AfeDma *pAfed, AfeCmd *pCommand)
{
Afec *pAfeHw = pAfed->pAfeHw;
/* Try to get the dataflash semaphore */
if (pAfed->semaphore == 0)
return AFE_ERROR_LOCK;
pAfed->semaphore--;
// Initialize the callback
pAfed->pCurrentCommand = pCommand;
/* Initialize DMA controller using channel 0 for RX. */
if (_AfeConfigureDmaChannels(pAfed))
return AFE_ERROR_LOCK;
/* Configure and enable interrupt on RC compare */
NVIC_ClearPendingIRQ(XDMAC_IRQn);
NVIC_SetPriority(XDMAC_IRQn , 1);
NVIC_EnableIRQ(XDMAC_IRQn);
if (_Afe_configureLinkList(pAfeHw, pAfed->pXdmad, pCommand))
return AFE_ERROR_LOCK;
AFEC_StartConversion(pAfeHw);
/* Start DMA 0(RX) */
if (XDMAD_StartTransfer(pAfed->pXdmad, afeDmaRxChannel))
return AFE_ERROR_LOCK;
return AFE_OK;;
}