/**
* @file
* @ingroup RTEMSBSPsSPARCLEON2
* @brief TTY driver driver for the serial ports on the LEON console
*
* This file contains the TTY driver for the serial ports on the LEON.
*/
/*
* COPYRIGHT (c) 1989-2014.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <stdlib.h>
#include <assert.h>
#include <rtems/console.h>
#include <rtems/libio.h>
#include <bsp.h>
/*
* Interrupt driven console IO
*/
#if (CONSOLE_USE_INTERRUPTS)
/*
* Buffers between task and ISRs
*/
#include <rtems/ringbuf.h>
Ring_buffer_t TX_Buffer[ 2 ];
bool Is_TX_active[ 2 ];
void *console_termios_data[ 2 ];
/*
* console_isr_a
*
* This routine is the console interrupt handler for Channel 1.
*
* Input parameters:
* vector - vector number
*
* Output parameters: NONE
*
* Return values: NONE
*/
rtems_isr console_isr_a(
rtems_vector_number vector
)
{
char ch;
int UStat;
if ( (UStat = LEON_REG.UART_Status_1) & LEON_REG_UART_STATUS_DR ) {
if (UStat & LEON_REG_UART_STATUS_ERR) {
LEON_REG.UART_Status_1 = LEON_REG_UART_STATUS_CLR;
}
ch = LEON_REG.UART_Channel_1;
rtems_termios_enqueue_raw_characters( console_termios_data[ 0 ], &ch, 1 );
}
if ( LEON_REG.UART_Status_1 & LEON_REG_UART_STATUS_THE ) {
if ( !Ring_buffer_Is_empty( &TX_Buffer[ 0 ] ) ) {
Ring_buffer_Remove_character( &TX_Buffer[ 0 ], ch );
LEON_REG.UART_Channel_1 = (uint32_t) ch;
} else
Is_TX_active[ 0 ] = false;
}
LEON_Clear_interrupt( LEON_INTERRUPT_UART_1_RX_TX );
}
/*
* console_isr_b
*
* This routine is the console interrupt handler for Channel 2.
*
* Input parameters:
* vector - vector number
*
* Output parameters: NONE
*
* Return values: NONE
*/
rtems_isr console_isr_b(
rtems_vector_number vector
)
{
char ch;
int UStat;
if ( (UStat = LEON_REG.UART_Status_2) & LEON_REG_UART_STATUS_DR ) {
if (UStat & LEON_REG_UART_STATUS_ERR) {
LEON_REG.UART_Status_2 = LEON_REG_UART_STATUS_CLR;
}
ch = LEON_REG.UART_Channel_2;
rtems_termios_enqueue_raw_characters( console_termios_data[ 1 ], &ch, 1 );
}
if ( LEON_REG.UART_Status_2 & LEON_REG_UART_STATUS_THE ) {
if ( !Ring_buffer_Is_empty( &TX_Buffer[ 1 ] ) ) {
Ring_buffer_Remove_character( &TX_Buffer[ 1 ], ch );
LEON_REG.UART_Channel_2 = (uint32_t) ch;
} else
Is_TX_active[ 1 ] = false;
}
LEON_Clear_interrupt( LEON_INTERRUPT_UART_2_RX_TX );
}
/*
* console_exit
*
* This routine allows the console to exit by masking its associated interrupt
* vectors.
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* Return values: NONE
*/
void console_exit()
{
uint32_t port;
uint32_t ch;
/*
* Although the interrupts for the UART are unmasked, the PIL is set to
* disable all external interrupts. So we might as well do this first.
*/
LEON_Mask_interrupt( LEON_INTERRUPT_UART_1_RX_TX );
LEON_Mask_interrupt( LEON_INTERRUPT_UART_2_RX_TX );
for ( port=0 ; port <= 1 ; port++ ) {
while ( !Ring_buffer_Is_empty( &TX_Buffer[ port ] ) ) {
Ring_buffer_Remove_character( &TX_Buffer[ port ], ch );
console_outbyte_polled( port, ch );
}
}
/*
* Now wait for all the data to actually get out ... the send register
* should be empty.
*/
while ( (LEON_REG.UART_Status_1 & LEON_REG_UART_STATUS_THE) !=
LEON_REG_UART_STATUS_THE );
while ( (LEON_REG.UART_Status_2 & LEON_REG_UART_STATUS_THE) !=
LEON_REG_UART_STATUS_THE );
LEON_REG.UART_Control_1 = 0;
LEON_REG.UART_Control_2 = 0;
LEON_REG.UART_Status_1 = 0;
LEON_REG.UART_Status_2 = 0;
}
#define CONSOLE_UART_1_TRAP LEON_TRAP_TYPE( LEON_INTERRUPT_UART_1_RX_TX )
#define CONSOLE_UART_2_TRAP LEON_TRAP_TYPE( LEON_INTERRUPT_UART_2_RX_TX )
/*
* console_initialize_interrupts
*
* This routine initializes the console's receive and transmit
* ring buffers and loads the appropriate vectors to handle the interrupts.
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* Return values: NONE
*/
#ifdef RDB_BREAK_IN
extern uint32_t trap_table[];
#endif
void console_initialize_interrupts( void )
{
Ring_buffer_Initialize( &TX_Buffer[ 0 ] );
Ring_buffer_Initialize( &TX_Buffer[ 1 ] );
Is_TX_active[ 0 ] = false;
Is_TX_active[ 1 ] = false;
atexit( console_exit );
LEON_REG.UART_Control_1 |= LEON_REG_UART_CTRL_RI | LEON_REG_UART_CTRL_TI;
LEON_REG.UART_Control_2 |= LEON_REG_UART_CTRL_RI | LEON_REG_UART_CTRL_TI;
set_vector( console_isr_a, CONSOLE_UART_1_TRAP, 1 );
#ifdef RDB_BREAK_IN
if (trap_table[0x150/4] == 0x91d02000)
#endif
set_vector( console_isr_b, CONSOLE_UART_2_TRAP, 1 );
}
/*
* console_outbyte_interrupt
*
* This routine transmits a character out.
*
* Input parameters:
* port - port to transmit character to
* ch - character to be transmitted
*
* Output parameters: NONE
*
* Return values: NONE
*/
void console_outbyte_interrupt(
int port,
char ch
)
{
/*
* If this is the first character then we need to prime the pump
*/
if ( Is_TX_active[ port ] == false ) {
Is_TX_active[ port ] = true;
console_outbyte_polled( port, ch );
return;
}
while ( Ring_buffer_Is_full( &TX_Buffer[ port ] ) );
Ring_buffer_Add_character( &TX_Buffer[ port ], ch );
}
#endif /* CONSOLE_USE_INTERRUPTS */
/*
* Console Termios Support Entry Points
*
*/
static ssize_t console_write_support (int minor, const char *buf, size_t len)
{
int nwrite = 0;
while (nwrite < len) {
#if (CONSOLE_USE_INTERRUPTS)
console_outbyte_interrupt( minor, *buf++ );
#else
console_outbyte_polled( minor, *buf++ );
#endif
nwrite++;
}
return nwrite;
}
/*
* Console Device Driver Entry Points
*
*/
rtems_device_driver console_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg
)
{
rtems_status_code status;
rtems_termios_initialize();
/*
* Register Device Names
*/
status = rtems_io_register_name( "/dev/console", major, 0 );
if (status != RTEMS_SUCCESSFUL)
rtems_fatal_error_occurred(status);
status = rtems_io_register_name( "/dev/console_b", major, 1 );
if (status != RTEMS_SUCCESSFUL)
rtems_fatal_error_occurred(status);
/*
* Initialize Hardware
*/
LEON_REG.UART_Control_1 |= LEON_REG_UART_CTRL_RE | LEON_REG_UART_CTRL_TE;
LEON_REG.UART_Control_2 |= LEON_REG_UART_CTRL_RE | LEON_REG_UART_CTRL_TE |
LEON_REG_UART_CTRL_RI; /* rx irq default enable for remote debugger */
LEON_REG.UART_Status_1 = 0;
LEON_REG.UART_Status_2 = 0;
#if (CONSOLE_USE_INTERRUPTS)
console_initialize_interrupts();
#endif
return RTEMS_SUCCESSFUL;
}
rtems_device_driver console_open(
rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
)
{
rtems_status_code sc;
#if (CONSOLE_USE_INTERRUPTS)
rtems_libio_open_close_args_t *args = arg;
static const rtems_termios_callbacks intrCallbacks = {
NULL, /* firstOpen */
NULL, /* lastClose */
NULL, /* pollRead */
console_write_support, /* write */
NULL, /* setAttributes */
NULL, /* stopRemoteTx */
NULL, /* startRemoteTx */
0 /* outputUsesInterrupts */
};
#else
static const rtems_termios_callbacks pollCallbacks = {
NULL, /* firstOpen */
NULL, /* lastClose */
console_inbyte_nonblocking, /* pollRead */
console_write_support, /* write */
NULL, /* setAttributes */
NULL, /* stopRemoteTx */
NULL, /* startRemoteTx */
0 /* outputUsesInterrupts */
};
#endif
assert( minor <= 1 );
if ( minor > 2 )
return RTEMS_INVALID_NUMBER;
#if (CONSOLE_USE_INTERRUPTS)
sc = rtems_termios_open (major, minor, arg, &intrCallbacks);
console_termios_data[ minor ] = args->iop->data1;
#else
sc = rtems_termios_open (major, minor, arg, &pollCallbacks);
#endif
(void) sc; /* avoid set but not used warning */
return RTEMS_SUCCESSFUL;
}
rtems_device_driver console_close(
rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
)
{
return rtems_termios_close (arg);
}
rtems_device_driver console_read(
rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
)
{
return rtems_termios_read (arg);
}
rtems_device_driver console_write(
rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
)
{
return rtems_termios_write (arg);
}
rtems_device_driver console_control(
rtems_device_major_number major,
rtems_device_minor_number minor,
void * arg
)
{
return rtems_termios_ioctl (arg);
}
