blob: 8e84ee883edd37b50b19c01df97eb239ed14cd97 (
plain) (
tree)
|
|
/*
* RTEMS TQM8xx BSP
* This include file contains all board IO definitions.
*/
/*
* This file has been adapted to MPC8xx by:
* Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
* Copyright (c) 2008
* Embedded Brains GmbH
* Obere Lagerstr. 30
* D-82178 Puchheim
* Germany
* rtems@embedded-brains.de
*
* COPYRIGHT (c) 1989-2008.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#ifndef LIBBSP_POWERPC_TQM8XX_BSP_H
#define LIBBSP_POWERPC_TQM8XX_BSP_H
/*
* indicate, that BSP is booted via TQMMon
*/
#define BSP_HAS_TQMMON
#include <libcpu/powerpc-utility.h>
LINKER_SYMBOL(TopRamReserved);
LINKER_SYMBOL( bsp_ram_start);
LINKER_SYMBOL( bsp_ram_end);
LINKER_SYMBOL( bsp_ram_size);
LINKER_SYMBOL( bsp_rom_start);
LINKER_SYMBOL( bsp_rom_end);
LINKER_SYMBOL( bsp_rom_size);
LINKER_SYMBOL( bsp_section_text_start);
LINKER_SYMBOL( bsp_section_text_end);
LINKER_SYMBOL( bsp_section_text_size);
LINKER_SYMBOL( bsp_section_data_start);
LINKER_SYMBOL( bsp_section_data_end);
LINKER_SYMBOL( bsp_section_data_size);
LINKER_SYMBOL( bsp_section_bss_start);
LINKER_SYMBOL( bsp_section_bss_end);
LINKER_SYMBOL( bsp_section_bss_size);
LINKER_SYMBOL( bsp_work_area_start);
#ifndef ASM
#include <bspopts.h>
#include <rtems.h>
#include <rtems/irq.h>
#include <mpc8xx.h>
#include <mpc8xx/cpm.h>
#include <mpc8xx/mmu.h>
#include <mpc8xx/console.h>
#include <bsp/vectors.h>
#include <bsp/tqm.h>
#include <libcpu/powerpc-utility.h>
#include <bsp/default-initial-extension.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Network driver configuration
*/
struct rtems_bsdnet_ifconfig;
#if BSP_USE_NETWORK_FEC
extern int rtems_fec_enet_driver_attach (struct rtems_bsdnet_ifconfig *config,
int attaching);
#define RTEMS_BSP_FEC_NETWORK_DRIVER_NAME "fec1"
#define RTEMS_BSP_FEC_NETWORK_DRIVER_ATTACH rtems_fec_enet_driver_attach
#endif
#if BSP_USE_NETWORK_SCC
extern int rtems_scc_enet_driver_attach (struct rtems_bsdnet_ifconfig *config,
int attaching);
#define RTEMS_BSP_SCC_NETWORK_DRIVER_NAME "scc1"
#define RTEMS_BSP_SCC_NETWORK_DRIVER_ATTACH rtems_scc_enet_driver_attach
#endif
#if BSP_USE_NETWORK_FEC
#define RTEMS_BSP_NETWORK_DRIVER_NAME RTEMS_BSP_FEC_NETWORK_DRIVER_NAME
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH RTEMS_BSP_FEC_NETWORK_DRIVER_ATTACH
#elif BSP_USE_NETWORK_SCC
#define RTEMS_BSP_NETWORK_DRIVER_NAME RTEMS_BSP_SCC_NETWORK_DRIVER_NAME
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH RTEMS_BSP_SCC_NETWORK_DRIVER_ATTACH
#endif
/*
* We need to decide how much memory will be non-cacheable. This
* will mainly be memory that will be used in DMA (network and serial
* buffers).
*/
#define NOCACHE_MEM_SIZE 512*1024
/*
* indicate, that BSP has IDE driver
*/
#undef RTEMS_BSP_HAS_IDE_DRIVER
/*
* SPI driver configuration
*/
/* select values for SPI addressing */
#define PGHPLUS_SPI_ADDR_EEPROM 0
#define PGHPLUS_SPI_ADDR_DISP4 1
/* NOTE: DISP4 occupies two consecutive addresses for data and control port */
#define PGHPLUS_SPI_ADDR_DISP4_DATA (PGHPLUS_SPI_ADDR_DISP4)
#define PGHPLUS_SPI_ADDR_DISP4_CTRL (PGHPLUS_SPI_ADDR_DISP4_DATA+1)
/* bit masks for Port B lines */
#define PGHPLUS_PB_SPI_EEP_CE_MSK (1<< 0)
#define PGHPLUS_PB_SPI_DISP4_RS_MSK (1<<15)
#define PGHPLUS_PB_SPI_DISP4_CE_MSK (1<<14)
/*
* our (internal) bus frequency
*/
extern uint32_t BSP_bus_frequency;
/*
* Interfaces to required Clock Driver support methods
*/
int BSP_disconnect_clock_handler(void);
int BSP_connect_clock_handler (rtems_irq_hdl);
extern uint32_t bsp_clock_speed;
char serial_getc(void);
int serial_tstc(void);
void serial_init(void);
int mbx8xx_console_get_configuration(void);
void _InitTQM8xx (void);
rtems_status_code bsp_register_spi(void);
void *bsp_idle_thread( uintptr_t ignored );
void cpu_init(void);
#ifdef __cplusplus
}
#endif
#endif
#endif
|
