blob: 6f1cc72a2c8e862773e5834c6c595aee024e54a5 (
plain) (
tree)
|
|
/*
* This routine does the bulk of the system initialization.
*/
/*
* The MPC860 specific stuff was written by Jay Monkman (jmonkman@frasca.com)
*
* Modified for the MPC8260ADS board by Andy Dachs <a.dachs@sstl.co.uk>
* Surrey Satellite Technology Limited, 2001
* A 40MHz system clock is assumed.
* The PON. RST.CONF. Dip switches (DS1) are
* 1 - Off
* 2 - On
* 3 - Off
* 4 - On
* 5 - Off
* 6 - Off
* 7 - Off
* 8 - Off
* Dip switches on DS2 and DS3 are all set to ON
* The LEDs on the board are used to signal panic and fatal_error
* conditions.
* The mmu is unused at this time.
*
* COPYRIGHT (c) 1989-2007.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <bsp.h>
#include <bsp/bootcard.h>
/*
#include <mmu.h>
*/
#include <mpc8260.h>
#include <rtems/score/thread.h>
#include <rtems/powerpc/powerpc.h>
#include <rtems/bspIo.h>
#include <rtems/counter.h>
#include <bsp/irq.h>
#include <libcpu/cpuIdent.h>
#include <libcpu/spr.h>
#include <string.h>
#define UART1_E 0x02000002 /* bit 6 of BCSR1 */
#define UART2_E 0x01000001 /* bit 7 of BCSR1 */
#define GP0_LED 0x02000002 /* bit 6 of BCSR0 */
#define GP1_LED 0x01000001 /* bit 7 of BCSR0 */
SPR_RW(SPRG1)
/*
* Driver configuration parameters
*/
uint32_t bsp_clock_speed;
uint32_t bsp_time_base_frequency;
uint32_t bsp_clicks_per_usec;
uint32_t bsp_serial_per_sec; /* Serial clocks per second */
bool bsp_serial_external_clock;
bool bsp_serial_xon_xoff;
bool bsp_serial_cts_rts;
uint32_t bsp_serial_rate;
extern char IntrStack_start [];
extern char intrStack [];
static void _BSP_GPLED0_on(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr0 &= ~GP0_LED; /* Turn on GP0 LED */
}
static void _BSP_GPLED0_off(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr0 |= GP0_LED; /* Turn off GP0 LED */
}
static void _BSP_GPLED1_on(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr0 &= ~GP1_LED; /* Turn on GP1 LED */
}
static void _BSP_GPLED1_off(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr0 |= GP1_LED; /* Turn off GP1 LED */
}
static void _BSP_Uart1_enable(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr1 &= ~UART1_E; /* Enable Uart1 */
}
static void _BSP_Uart2_enable(void)
{
BCSR *csr;
csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
csr->bcsr1 &= ~UART2_E; /* Enable Uart2 */
}
uint32_t _CPU_Counter_frequency(void)
{
return bsp_clock_speed;
}
void bsp_start(void)
{
/* Set MPC8260ADS board LEDS and Uart enable lines */
_BSP_GPLED0_off();
_BSP_GPLED1_off();
_BSP_Uart1_enable();
_BSP_Uart2_enable();
/*
* Get CPU identification dynamically. Note that the get_ppc_cpu_type()
* function stores the result in global variables so that it can be used
* later...
*/
get_ppc_cpu_type();
get_ppc_cpu_revision();
cpu_init();
/*
mmu_init();
*/
/* Initialize exception handler */
/* FIXME: Interrupt stack begin and size */
ppc_exc_initialize(
(uintptr_t) IntrStack_start,
(uintptr_t) intrStack - (uintptr_t) IntrStack_start
);
/* Initalize interrupt support */
bsp_interrupt_initialize();
/*
mmu_init();
*/
/*
* Enable instruction and data caches. Do not force writethrough mode.
*/
#if BSP_INSTRUCTION_CACHE_ENABLED
rtems_cache_enable_instruction();
#endif
#if BSP_DATA_CACHE_ENABLED
rtems_cache_enable_data();
#endif
/*
* initialize the device driver parameters
*/
bsp_time_base_frequency = 10000000;
bsp_clicks_per_usec = 10; /* for 40MHz extclk */
bsp_serial_per_sec = 40000000;
bsp_serial_external_clock = 0;
bsp_serial_xon_xoff = 0;
bsp_serial_cts_rts = 0;
bsp_serial_rate = 9600;
bsp_clock_speed = 40000000;
#ifdef REV_0_2
/* set up some board specific registers */
m8260.siumcr &= 0xF3FFFFFF; /* set TBEN ** BUG FIX ** */
m8260.siumcr |= 0x08000000;
#endif
/* use BRG1 to generate 32kHz timebase */
/*
m8260.brgc1 = M8260_BRG_EN + (uint32_t)(((uint16_t)((40016384)/(32768)) - 1) << 1) + 0;
*/
#ifdef SHOW_MORE_INIT_SETTINGS
printk("Exit from bspstart\n");
#endif
}
|
