blob: 1d680fe355e55744d2b2f16255b85af8d2f46d36 (
plain) (
tree)
|
|
/*
* This file provides a template for the clock device driver initialization.
*
* If possible, please use the dev/clock/clockimpl.h method for instantiating
* a clock driver.
*/
/*
* COPYRIGHT (c) 1989-2014.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <stdlib.h>
#include <rtems.h>
#include <bsp.h>
void Clock_exit( void );
rtems_isr Clock_isr( rtems_vector_number vector );
/*
* The interrupt vector number associated with the clock tick device
* driver.
*/
#define CLOCK_VECTOR 4
/*
* Clock_driver_ticks is a monotonically increasing counter of the
* number of clock ticks since the driver was initialized.
*/
volatile uint32_t Clock_driver_ticks;
/*
* Clock_isrs is the number of clock ISRs until the next invocation of
* the RTEMS clock tick routine. The clock tick device driver
* gets an interrupt once a millisecond and counts down until the
* length of time between the user configured microseconds per tick
* has passed.
*/
uint32_t Clock_isrs; /* ISRs until next tick */
/*
* The previous ISR on this clock tick interrupt vector.
*/
rtems_isr_entry Old_ticker;
static void Clock_exit( void );
/*
* Isr Handler
*/
static rtems_isr Clock_isr(
rtems_vector_number vector
)
{
/*
* bump the number of clock driver ticks since initialization
*
* determine if it is time to announce the passing of tick as configured
* to RTEMS through the rtems_clock_tick directive
*
* perform any timer dependent tasks
*/
}
/*
* Install_clock
*
* Install a clock tick handler and reprograms the chip. This
* is used to initially establish the clock tick.
*/
void Install_clock(
rtems_isr_entry clock_isr
)
{
/*
* Initialize the clock tick device driver variables
*/
Clock_driver_ticks = 0;
Clock_isrs = rtems_configuration_get_microseconds_per_tick() / 1000;
Old_ticker = (rtems_isr_entry) set_vector( clock_isr, CLOCK_VECTOR, 1 );
/*
* Hardware specific initialize goes here
*/
/* XXX */
/*
* Schedule the clock cleanup routine to execute if the application exits.
*/
atexit( Clock_exit );
}
/*
* Clean up before the application exits
*/
void Clock_exit( void )
{
/* XXX: turn off the timer interrupts */
/* XXX: If necessary, restore the old vector */
}
/*
* Clock_initialize
*
* Device driver entry point for clock tick driver initialization.
*/
rtems_device_driver Clock_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
Install_clock( Clock_isr );
return RTEMS_SUCCESSFUL;
}
|