path: root/bsps/m68k/gen68360/console/console.c

/*
 *  SMC1 raw console serial I/O.
 *
 *  This driver is an example of `POLLING' or `INTERRUPT' I/O.
 *
 *  To run with interrupt-driven I/O, ensure m360_smc1_interrupt
 *  is set before calling the initialization routine.
 */

/*
 * Copyright (c) 1996 Eric Norum <eric@norum.ca>
 *
 * COPYRIGHT (c) 1989-1999.
 * On-Line Applications Research Corporation (OAR).
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rtems.org/license/LICENSE.
 */

#include <termios.h>
#include <bsp.h>
#include <rtems/libio.h>
#include <rtems/console.h>
#include <rtems/termiostypes.h>
#include <rtems/m68k/m68360.h>

/*
 * Declare clock speed -- may be overwritten by downloader or debugger
 */
int m360_clock_rate  = 25000000;

/*
 * Interrupt-driven input buffer
 * Declare console baud rate -- may also be overwritten
 */
int console_baud_rate = 9600;

/*
 */
#define RXBUFSIZE  16

/*
 * Interrupt-driven callback
 */
static int m360_smc1_interrupt = 1;
static void *smc1ttyp;

/*
 * I/O buffers and pointers to buffer descriptors
 */
static volatile char rxBuf[RXBUFSIZE];
static volatile m360BufferDescriptor_t *smcRxBd, *smcTxBd;

/*
 * Device-specific routines
 */

/*
 * Compute baud-rate-generator configuration register value
 */
static int
smc1BRGC (int baud)
{
  int divisor;
  int div16 = 0;

  divisor = ((m360_clock_rate / 16) + (baud / 2)) / baud;
  if (divisor > 4096) {
    div16 = 1;
    divisor = (divisor + 8) / 16;
  }
  return M360_BRG_EN | M360_BRG_EXTC_BRGCLK | ((divisor - 1) << 1) | div16;
}

/*
 * Hardware-dependent portion of tcsetattr().
 */
static int
smc1SetAttributes (int minor, const struct termios *t)
{
  int baud;

  baud = rtems_termios_baud_to_number(t->c_ospeed);
  if (baud > 0)
    m360.brgc1 = smc1BRGC (baud);
  return 0;
}

/*
 * Interrupt handler
 */
static rtems_isr
smc1InterruptHandler (rtems_vector_number v)
{
  /*
   * Buffer received?
   */
  if (m360.smc1.smce & 0x1) {
    m360.smc1.smce = 0x1;
    while ((smcRxBd->status & M360_BD_EMPTY) == 0) {
      rtems_termios_enqueue_raw_characters (smc1ttyp,
              (char *)smcRxBd->buffer,
              smcRxBd->length);
      smcRxBd->status = M360_BD_EMPTY | M360_BD_WRAP | M360_BD_INTERRUPT;
    }
  }

  /*
   * Buffer transmitted?
   */
  if (m360.smc1.smce & 0x2) {
    m360.smc1.smce = 0x2;
    if ((smcTxBd->status & M360_BD_READY) == 0)
      rtems_termios_dequeue_characters (smc1ttyp, smcTxBd->length);
  }
  m360.cisr = 1UL << 4;  /* Clear SMC1 interrupt-in-service bit */
}

static int
smc1Initialize (int major, int minor, void *arg)
{
  /*
   * Allocate buffer descriptors
   */
  smcRxBd = M360AllocateBufferDescriptors (1);
  smcTxBd = M360AllocateBufferDescriptors (1);

  /*
   * Configure port B pins to enable SMTXD1 and SMRXD1 pins
   */
  m360.pbpar |=  0xC0;
  m360.pbdir &= ~0xC0;
  m360.pbodr &= ~0xC0;

  /*
   * Set up BRG1 (9,600 baud)
   */
  m360.brgc1 = M360_BRG_RST;
  m360.brgc1 = smc1BRGC (console_baud_rate);

  /*
   * Put SMC1 in NMSI mode, connect SMC1 to BRG1
   */
  m360.simode |= M360_SI_SMC1_BRG1;

  /*
   * Set up SMC1 parameter RAM common to all protocols
   */
  m360.smc1p.rbase = (char *)smcRxBd - (char *)&m360;
  m360.smc1p.tbase = (char *)smcTxBd - (char *)&m360;
  m360.smc1p.rfcr = M360_RFCR_MOT | M360_RFCR_DMA_SPACE;
  m360.smc1p.tfcr = M360_TFCR_MOT | M360_TFCR_DMA_SPACE;
  if (m360_smc1_interrupt)
    m360.smc1p.mrblr = RXBUFSIZE;
  else
    m360.smc1p.mrblr = 1;

  /*
   * Set up SMC1 parameter RAM UART-specific parameters
   */
  m360.smc1p.un.uart.max_idl = 10;
  m360.smc1p.un.uart.brklen = 0;
  m360.smc1p.un.uart.brkec = 0;
  m360.smc1p.un.uart.brkcr = 0;

  /*
   * Set up the Receive Buffer Descriptor
   */
  smcRxBd->status = M360_BD_EMPTY | M360_BD_WRAP | M360_BD_INTERRUPT;
  smcRxBd->length = 0;
  smcRxBd->buffer = rxBuf;

  /*
   * Setup the Transmit Buffer Descriptor
   */
  smcTxBd->status = M360_BD_WRAP;

  /*
   * Set up SMC1 general and protocol-specific mode registers
   */
  m360.smc1.smce = ~0;  /* Clear any pending events */
  m360.smc1.smcm = 0;  /* Mask all interrupt/event sources */
  m360.smc1.smcmr = M360_SMCMR_CLEN(9) | M360_SMCMR_SM_UART;

  /*
   * Send "Init parameters" command
   */
  M360ExecuteRISC (M360_CR_OP_INIT_RX_TX | M360_CR_CHAN_SMC1);

  /*
   * Enable receiver and transmitter
   */
  m360.smc1.smcmr |= M360_SMCMR_TEN | M360_SMCMR_REN;

  if (m360_smc1_interrupt) {
  rtems_isr_entry old_handler;

  (void) rtems_interrupt_catch (smc1InterruptHandler,
            (m360.cicr & 0xE0) | 0x04,
            &old_handler);
  m360.smc1.smcm = 3;  /* Enable SMC1 TX and RX interrupts */
  m360.cimr |= 1UL << 4;  /* Enable SMC1 interrupts */
  }

  return 0;
}

static int
smc1PollRead (int minor)
{
  unsigned char c;

  if (smcRxBd->status & M360_BD_EMPTY)
    return -1;
  c = rxBuf[0];
  smcRxBd->status = M360_BD_EMPTY | M360_BD_WRAP;
  return c;
}

/*
 * Device-dependent write routine
 * Interrupt-driven devices:
 *  Begin transmission of as many characters as possible (minimum is 1).
 * Polling devices:
 *  Transmit all characters.
 */
static ssize_t
smc1InterruptWrite (int minor, const char *buf, size_t len)
{
  if (len > 0) {
    smcTxBd->buffer = (char *)buf;
    smcTxBd->length = len;
    smcTxBd->status = M360_BD_READY | M360_BD_WRAP | M360_BD_INTERRUPT;
  }

  return 0;
}

static ssize_t
smc1PollWrite (int minor, const char *buf, size_t len)
{
  size_t retval = len;
  while (len--) {
    static char txBuf;
    while (smcTxBd->status & M360_BD_READY)
      continue;
    txBuf = *buf++;
    smcTxBd->buffer = &txBuf;
    smcTxBd->length = 1;
    smcTxBd->status = M360_BD_READY | M360_BD_WRAP;
  }
  return retval;
}

/*
 ***************
 * BOILERPLATE *
 ***************
 */

/*
 * Reserve resources consumed by this driver
 *
 * NOTE: This is in another file to reduce dependencies on the minimum size.
 */

/*
 * Initialize and register the device
 */
rtems_device_driver console_initialize(
  rtems_device_major_number  major,
  rtems_device_minor_number  minor,
  void                      *arg
)
{
  rtems_status_code status;

  /*
   * Set up TERMIOS
   */
  rtems_termios_initialize ();

  /*
   * Register the device
   */
  status = rtems_io_register_name ("/dev/console", major, 0);
  if (status != RTEMS_SUCCESSFUL)
    rtems_fatal_error_occurred (status);
  return RTEMS_SUCCESSFUL;
}

/*
 * Open the device
 */
rtems_device_driver console_open(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  rtems_status_code sc;
  static const rtems_termios_callbacks intrCallbacks = {
    smc1Initialize,    /* firstOpen */
    NULL,      /* lastClose */
    NULL,      /* pollRead */
    smc1InterruptWrite,  /* write */
    smc1SetAttributes,  /* setAttributes */
    NULL,      /* stopRemoteTx */
    NULL,      /* startRemoteTx */
    1      /* outputUsesInterrupts */
  };
  static const rtems_termios_callbacks pollCallbacks = {
    smc1Initialize,    /* firstOpen */
    NULL,      /* lastClose */
    smc1PollRead,    /* pollRead */
    smc1PollWrite,    /* write */
    smc1SetAttributes,  /* setAttributes */
    NULL,      /* stopRemoteTx */
    NULL,      /* startRemoteTx */
    0      /* outputUsesInterrupts */
  };

  /*
   * Do generic termios initialization
   */
  if (m360_smc1_interrupt) {
    rtems_libio_open_close_args_t *args = arg;

    sc = rtems_termios_open (major, minor, arg, &intrCallbacks);
    smc1ttyp = args->iop->data1;
  }
  else {
    sc = rtems_termios_open (major, minor, arg, &pollCallbacks);
  }
  return sc;
}

/*
 * Close the device
 */
rtems_device_driver console_close(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  return rtems_termios_close (arg);
}

/*
 * Read from the device
 */
rtems_device_driver console_read(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  return rtems_termios_read (arg);
}

/*
 * Write to the device
 */
rtems_device_driver console_write(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  return rtems_termios_write (arg);
}

/*
 * Handle ioctl request.
 */
rtems_device_driver console_control(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  return rtems_termios_ioctl (arg);
}