blob: df5eedb2fda3d4b935924c332e94024002a3274a (
plain) (
tree)
|
|
/*
* This is where the real hardware setup is done. A minimal stack
* has been provided by the start.S code. No normal C or RTEMS
* functions can be called from here.
*
* This routine is pretty simple for the uC5282 because all the hard
* work has been done by the bootstrap dBUG code.
*/
#include <bsp.h>
#define m68k_set_cacr(_cacr) \
__asm__ volatile ("movec %0,%%cacr" : : "d" (_cacr))
#define m68k_set_acr0(_acr0) \
__asm__ volatile ("movec %0,%%acr0" : : "d" (_acr0))
#define m68k_set_acr1(_acr1) \
__asm__ volatile ("movec %0,%%acr1" : : "d" (_acr1))
#define MM_SDRAM_BASE (0x00000000)
/*
* External methods used by this file
*/
extern void CopyDataClearBSSAndStart (void);
extern void INTERRUPT_VECTOR(void);
void Init5282 (void)
{
int x;
int temp = 0;
/*Setup the GPIO Registers */
MCF5282_GPIO_PBCDPAR = 0x80;
MCF5282_GPIO_PEPAR = 0x5100;
MCF5282_GPIO_PJPAR = 0xFF;
MCF5282_GPIO_PASPAR = 0x0000;
MCF5282_GPIO_PEHLPAR = 0xC0;
MCF5282_GPIO_PUAPAR = 0x0F;
MCF5282_QADC_DDRQB = 0x07;
MCF5282_GPTA_GPTDDR = 0x0C;
MCF5282_GPTA_GPTPORT = 0x4;
/*Setup the Chip Selects so CS0 is flash */
MCF5282_CS0_CSAR =(0xff800000 & 0xffff0000)>>16;
MCF5282_CS0_CSMR = 0x007f0001;
MCF5282_CS0_CSCR =(((0xf)&0x0F)<<10)|(1<<8)|(0x80);
/*Setup the SDRAM */
for(x=0; x<20000; x++) {
temp +=1;
}
MCF5282_SDRAMC_DCR = 0x00000239;
MCF5282_SDRAMC_DACR0 = 0x00001320;
MCF5282_SDRAMC_DMR0 = (0x00FC0000) | (0x00000001);
for(x=0; x<20000; x++) {
temp +=1;
}
/* set ip ( bit 3 ) in dacr */
MCF5282_SDRAMC_DACR0 |= (0x00000008) ;
/* init precharge */
*((short *)MM_SDRAM_BASE) = 0;
/* set RE in dacr */
MCF5282_SDRAMC_DACR0 |= (0x00008000);
/* wait */
for(x=0; x<20000; x++) {
temp +=1;
}
/* issue IMRS */
MCF5282_SDRAMC_DACR0 |= (0x00000040);
*((short *)MM_SDRAM_BASE) = 0x0000;
for(x=0; x<60000; x++) {
temp +=1;
}
*((unsigned long*)MM_SDRAM_BASE)=0x12345678;
/* Copy the interrupt vector table to address 0x0 in SDRAM */
{
uint32_t *inttab = (uint32_t *)&INTERRUPT_VECTOR;
uint32_t *intvec = (uint32_t *)0x0;
register int i;
for (i = 0; i < 256; i++) {
*(intvec++) = *(inttab++);
}
}
/*
* Copy data, clear BSS and call boot_card()
*/
CopyDataClearBSSAndStart ();
}
|