/*
* FB driver for Cirrus GD5446 graphic hardware.
* Tested to be compatible with QEMU GD5446 emulation but not on real HW.
*
* Copyright (c) 2012 - Alexandru-Sever Horin (alex.sever.h@gmail.com).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*
* The code is based on next information sources:
* - CL-GD5446 Technical Reference Manual, 1996, Second Edition
* - RTEMS fb_vga.c - Rosimildo da Silva ( rdasilva@connecttel.com )
* - Cirrus xf86 driver - used as VGA hardware setup sequence documentation
*/
#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include <sys/types.h>
#include <pthread.h>
#include <bsp.h>
#include <bsp/irq.h>
#include <rtems/libio.h>
#include <rtems/pci.h>
#include <rtems/fb.h>
#include <rtems/framebuffer.h>
#include <rtems/score/atomic.h>
/* flag to limit driver to protect against multiple opens */
static Atomic_Flag driver_mutex;
/* screen information for the VGA driver
* standard structures
*/
static struct fb_var_screeninfo fb_var;
static struct fb_fix_screeninfo fb_fix;
#define CIRRUS_VENDOR_ID 0x1013
#define CIRRUS_GD5446_DEVICE_ID 0x00b8
typedef struct _DisplayModeRec {
struct _DisplayModeRec *prev;
struct _DisplayModeRec *next;
char *name; /* identifier for the mode */
int type;
/* These are the values that the user sees/provides */
int Clock; /* pixel clock freq (kHz) */
int HDisplay; /* horizontal timing */
int HSyncStart;
int HSyncEnd;
int HTotal;
int HSkew;
int VDisplay; /* vertical timing */
int VSyncStart;
int VSyncEnd;
int VTotal;
int VScan;
int Flags;
/* These are the values the hardware uses */
int ClockIndex;
int SynthClock; /* Actual clock freq to
* be programmed (kHz) */
int CrtcHDisplay;
int CrtcHBlankStart;
int CrtcHSyncStart;
int CrtcHSyncEnd;
int CrtcHBlankEnd;
int CrtcHTotal;
int CrtcHSkew;
int CrtcVDisplay;
int CrtcVBlankStart;
int CrtcVSyncStart;
int CrtcVSyncEnd;
int CrtcVBlankEnd;
int CrtcVTotal;
int CrtcHAdjusted;
int CrtcVAdjusted;
int PrivSize;
int32_t *Private;
int PrivFlags;
float HSync, VRefresh;
} DisplayModeRec, *DisplayModePtr;
static DisplayModeRec available_modes[] = {
{
.Clock = 31500 ,
.HDisplay = 640 ,
.HSyncStart = 664 ,
.HSyncEnd = 704 ,
.HTotal = 832 ,
.HSkew = 0 ,
.VDisplay = 480 , /* vertical timing */
.VSyncStart = 489 ,
.VSyncEnd = 491 ,
.VTotal = 520 ,
.VScan = 0,
.Flags = 0
},
{
.Clock = 40000 ,
.HDisplay = 800 ,
.HSyncStart = 840 ,
.HSyncEnd = 968 ,
.HTotal = 1056 ,
.HSkew = 0 ,
.VDisplay = 600 , /* vertical timing */
.VSyncStart = 601 ,
.VSyncEnd = 605 ,
.VTotal = 628 ,
.VScan = 0,
.Flags = 0
},
};
static DisplayModePtr active_mode;
/* The display mode used for the board hardcoded in the following define
* Index in above structure
*/
#define CIRRUS_DISPLAY_MODE 0
/* The display bytes per pixel used for the board hardcoded in the following define
* Index in above structure
*/
#define CIRRUS_DEFAULT_BPP 24
/* cirrus board information */
struct cirrus_board_str{
int pci_bus;
int pci_device;
int pci_function;
void *reg_base;
};
static struct cirrus_board_str cirrus_board_info;
/*
* get information from the board
*/
static int
cirrus_pci_read( struct cirrus_board_str *cirrus_board, uint32_t *mem_base, uint32_t *cirrus_register_base)
{
int r;
r = pci_read_config_dword(
cirrus_board->pci_bus, cirrus_board->pci_device, cirrus_board->pci_function,
PCI_BASE_ADDRESS_0, mem_base);
if( r != PCIB_ERR_SUCCESS)
return RTEMS_UNSATISFIED;
r = pci_read_config_dword(
cirrus_board->pci_bus, cirrus_board->pci_device, cirrus_board->pci_function,
PCI_BASE_ADDRESS_1, cirrus_register_base);
if( r != PCIB_ERR_SUCCESS)
return RTEMS_UNSATISFIED;
*mem_base &= PCI_BASE_ADDRESS_MEM_MASK;
*cirrus_register_base &= PCI_BASE_ADDRESS_MEM_MASK;
return RTEMS_SUCCESSFUL;
}
static inline int
fb_cirrus_read_config_dword(
struct cirrus_board_str *fbst,
unsigned char where,
uint32_t *pval)
{
return pci_read_config_dword(
fbst->pci_bus, fbst->pci_device, fbst->pci_function,
where, pval);
}
static inline int
fb_cirrus_write_config_dword(
struct cirrus_board_str *fbst,
unsigned char where,
uint32_t val)
{
return pci_write_config_dword(
fbst->pci_bus, fbst->pci_device, fbst->pci_function,
where, val);
}
static inline void
fb_cirrus_write_reg8 (
const struct cirrus_board_str *fbst,
unsigned int reg,
unsigned int val)
{
*(volatile uint8_t*)((char *)fbst->reg_base + reg) = val;
}
static inline unsigned int
fb_cirrus_read_reg8 (
const struct cirrus_board_str *fbst,
unsigned int reg)
{
return *(volatile uint8_t*)((char *)fbst->reg_base + reg);
}
#define SEQ_INDEX 0x04
#define SEQ_DATA 0x05
static inline void
fb_cirrus_write_seq_reg (
const struct cirrus_board_str *fbst,
unsigned int reg,
unsigned int val)
{
fb_cirrus_write_reg8(fbst, SEQ_INDEX, reg);
fb_cirrus_write_reg8(fbst, SEQ_DATA, val);
}
static inline unsigned int
fb_cirrus_read_seq_reg (
const struct cirrus_board_str *fbst,
unsigned int reg)
{
fb_cirrus_write_reg8(fbst, SEQ_INDEX, reg);
return fb_cirrus_read_reg8(fbst, SEQ_DATA);
}
#define CRT_INDEX 0x14
#define CRT_DATA 0x15
static inline void
fb_cirrus_write_crt_reg (
const struct cirrus_board_str *fbst,
unsigned int reg,
unsigned int val)
{
fb_cirrus_write_reg8(fbst, CRT_INDEX, reg);
fb_cirrus_write_reg8(fbst, CRT_DATA, val);
}
static inline unsigned int
fb_cirrus_read_crt_reg (
const struct cirrus_board_str *fbst,
unsigned int reg)
{
fb_cirrus_write_reg8(fbst, CRT_INDEX, reg);
return fb_cirrus_read_reg8(fbst, CRT_DATA);
}
#define GDC_INDEX 0x0E
#define GDC_DATA 0x0F
static inline void
fb_cirrus_write_gdc_reg (
const struct cirrus_board_str *fbst,
unsigned int reg,
unsigned int val)
{
fb_cirrus_write_reg8(fbst, GDC_INDEX, reg);
fb_cirrus_write_reg8(fbst, GDC_DATA, val);
}
static inline unsigned int
fb_cirrus_read_gdc_reg (
const struct cirrus_board_str *fbst,
unsigned int reg)
{
fb_cirrus_write_reg8(fbst, GDC_INDEX, reg);
return fb_cirrus_read_reg8(fbst, GDC_DATA);
}
#define VGA_DAC_MASK 0x06
static inline void
fb_cirrus_write_hdr_reg (
const struct cirrus_board_str *fbst,
unsigned int val)
{
volatile unsigned int dummy RTEMS_UNUSED;
dummy = fb_cirrus_read_reg8(fbst, VGA_DAC_MASK);
dummy = fb_cirrus_read_reg8(fbst, VGA_DAC_MASK);
dummy = fb_cirrus_read_reg8(fbst, VGA_DAC_MASK);
dummy = fb_cirrus_read_reg8(fbst, VGA_DAC_MASK);
fb_cirrus_write_reg8(fbst, VGA_DAC_MASK, val);
}
/* Functionality to support multiple VGA frame buffers can be added easily,
* but is not supported at this moment because there is no need for two or
* more "classic" VGA adapters. Multiple frame buffer drivers may be
* implemented and If we had implement it they would be named as "/dev/fb0",
* "/dev/fb1", "/dev/fb2" and so on.
*/
/*
* fb_cirrus device driver INITIALIZE entry point.
*/
rtems_device_driver
frame_buffer_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg
)
{
rtems_status_code status;
int res;
printk( "FB_CIRRUS -- driver initializing..\n" );
res = pci_find_device(
CIRRUS_VENDOR_ID,
CIRRUS_GD5446_DEVICE_ID,
minor,
&cirrus_board_info.pci_bus,
&cirrus_board_info.pci_device,
&cirrus_board_info.pci_function
);
if ( res != PCIB_ERR_SUCCESS ) {
printk( "FB_CIRRUS initialize -- device not found\n" );
return RTEMS_UNSATISFIED;
}
else{
printk( "FB_CIRRUS -- driver initializing..\n" );
/*
* Register the device
*/
status = rtems_io_register_name (FRAMEBUFFER_DEVICE_0_NAME, major, 0);
if (status != RTEMS_SUCCESSFUL) {
printk("Error registering " FRAMEBUFFER_DEVICE_0_NAME
" FB_CIRRUS framebuffer device!\n");
rtems_fatal_error_occurred( status );
}
_Atomic_Flag_clear(&driver_mutex, ATOMIC_ORDER_RELEASE);
return RTEMS_SUCCESSFUL;
}
}
/*
* This function is used to initialize the Start Address - the first
* displayed location in the video memory.
* Usually mandatory
*/
static void
cirrus_adjust_frame( struct cirrus_board_str *board, int x, int y)
{
uint32_t Base;
uint8_t tmp;
Base = ((y * fb_var.xres + x) >> 3);
if (fb_var.bits_per_pixel != 1)
Base *= (fb_var.bits_per_pixel >> 2);
printk("FB_CIRRUS: cirrus_adjust_frame %d %d >>> %d %x\n", x, y, Base, Base);
if ((Base & ~0x000FFFFF) != 0) {
printk("FB_CIRRUS: Internal error: cirrus_adjust_frame: cannot handle overflow\n");
return;
}
fb_cirrus_write_crt_reg( board, 0x0C, (Base >> 8) & 0xff);
fb_cirrus_write_crt_reg( board, 0x0D, Base & 0xff);
tmp = fb_cirrus_read_crt_reg( board, 0x1B);
tmp &= 0xF2;
tmp |= (Base >> 16) & 0x01;
tmp |= (Base >> 15) & 0x0C;
fb_cirrus_write_crt_reg( board, 0x1B, tmp);
tmp = fb_cirrus_read_crt_reg( board, 0x1D);
tmp &= 0x7F;
tmp |= (Base >> 12) & 0x80;
fb_cirrus_write_crt_reg( board, 0x1D, tmp);
}
static int
cirrus_set_mode(DisplayModePtr mode)
{
int depthcode = fb_var.bits_per_pixel;;
int width;
int HDiv2 = 0, VDiv2 = 0;
const struct cirrus_board_str *cirrus_board_ptr = &cirrus_board_info;
int temp;
int hdr = -1;
printk("FB_CIRRUS: mode %d bpp, %d Hz %d %d %d %d %d %d %d %d\n",
fb_var.bits_per_pixel,
mode->Clock,
mode->HDisplay,
mode->HSyncStart,
mode->HSyncEnd,
mode->HTotal,
mode->VDisplay,
mode->VSyncStart,
mode->VSyncEnd,
mode->VTotal);
if ( mode->Clock > 85500 ) {
/* The actual DAC register value is set later. */
/* The CRTC is clocked at VCLK / 2, so we must half the */
/* horizontal timings. */
if (!mode->CrtcHAdjusted) {
mode->HDisplay >>= 1;
mode->HSyncStart >>= 1;
mode->HTotal >>= 1;
mode->HSyncEnd >>= 1;
mode->SynthClock >>= 1;
mode->CrtcHAdjusted = TRUE;
}
depthcode += 64;
HDiv2 = 1;
}
if (mode->VTotal >= 1024 ) {
/* For non-interlaced vertical timing >= 1024, the vertical timings */
/* are divided by 2 and VGA CRTC 0x17 bit 2 is set. */
if (!mode->CrtcVAdjusted) {
mode->VDisplay >>= 1;
mode->VSyncStart >>= 1;
mode->VSyncEnd >>= 1;
mode->VTotal >>= 1;
mode->CrtcVAdjusted = TRUE;
}
VDiv2 = 1;
}
/****************************************************
* Sequential registers
*/
fb_cirrus_write_seq_reg(cirrus_board_ptr, 0x00, 0x00);
fb_cirrus_write_seq_reg(cirrus_board_ptr, 0x01, 0x01);
fb_cirrus_write_seq_reg(cirrus_board_ptr, 0x02, 0x0F);
fb_cirrus_write_seq_reg(cirrus_board_ptr, 0x03, 0x00);
fb_cirrus_write_seq_reg(cirrus_board_ptr, 0x04, 0x0E);
/****************************************************
* CRTC Controller Registers
*/
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x00, (mode->HTotal >> 3) - 5 );
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x01, (mode->HDisplay >> 3) - 1);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x02, (mode->HSyncStart >> 3) - 1);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x03, ((mode->HSyncEnd >> 3) & 0x1F) | 0x80);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x04, (mode->HSyncStart >> 3));
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x05,
(((mode->HSyncEnd >> 3) & 0x20 ) << 2 )
| (((mode->HSyncEnd >> 3)) & 0x1F));
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x06, (mode->VTotal - 2) & 0xFF);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x07,
(((mode->VTotal -2) & 0x100) >> 8 )
| (((mode->VDisplay -1) & 0x100) >> 7 )
| ((mode->VSyncStart & 0x100) >> 6 )
| (((mode->VSyncStart) & 0x100) >> 5 )
| 0x10
| (((mode->VTotal -2) & 0x200) >> 4 )
| (((mode->VDisplay -1) & 0x200) >> 3 )
| ((mode->VSyncStart & 0x200) >> 2 ));
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x08, 0x00);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x09, ((mode->VSyncStart & 0x200) >>4) | 0x40);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x0A, 0x00);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x0B, 0x00);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x0C, 0x00);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x0D, 0x00);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x0E, 0x00);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x0F, 0x00);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x10, mode->VSyncStart & 0xFF);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x11, (mode->VSyncEnd & 0x0F) | 0x20);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x12, (mode->VDisplay -1) & 0xFF);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x13, 0x00); /* no interlace */
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x14, 0x00);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x15, mode->VSyncStart & 0xFF);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x16, (mode->VSyncStart +1) & 0xFF);
temp = 0xAF;
if(VDiv2)
temp |= 0x04;
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x17, temp);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x18, 0xFF);
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x1A ,
(((mode->HTotal >> 3) & 0xC0 ) >> 2)
| (((mode->VTotal - 2) & 0x300 ) >> 2));
width = fb_fix.line_length >> 3;
if (fb_var.bits_per_pixel == 1)
width <<= 2;
if(width >= 0xFF)
printk("FB_CIRRUS: Warning line size over the limit ... reduce bpp or width resolution");
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x13, width);
/* Offset extension (see CR13) */
temp = fb_cirrus_read_crt_reg( cirrus_board_ptr, 0x1B);
temp &= 0xAF;
temp |= (width >> (3+4)) & 0x10;
temp |= (width >> (3+3)) & 0x40;
temp |= 0x22;
fb_cirrus_write_crt_reg( cirrus_board_ptr, 0x1B, temp);
/****************************************************
* Sequential register
* Enable linear mode and high-res packed pixel mode
*/
temp = fb_cirrus_read_seq_reg( cirrus_board_ptr, 0x07);
temp &= 0xe0;
switch (depthcode) {
case 1:
case 4:
temp |= 0x10;
break;
case 8:
temp |= 0x11;
break;
case 64+8:
temp |= 0x17;
break;
case 15:
temp |= 0x17;
hdr = 0xC0; /* 5:5:5 Sierra */
break;
case 16:
temp |= 0x17;
hdr = 0xC1; /* 5:6:5 XGA mode */
break;
case 24:
temp |= 0x15;
hdr = 0xC5; /* 8:8:8 16M colors */
break;
case 32:
temp |= 0x19;
hdr = 0xC5; /* 8:8:8 16M colors */
break;
default:
printk("FB_CIRRUS: Cannot Initialize display to requested mode\n");
printk("FB_CIRRUS: returning RTEMS_UNSATISFIED on depthcode %d\n", depthcode);
return RTEMS_UNSATISFIED;
}
fb_cirrus_write_seq_reg( cirrus_board_ptr, 0x07, temp);
/* this just set packed pixel mode with according bpp */
/****************************************************
* HDR Register
*/
if(hdr > 0)
fb_cirrus_write_hdr_reg( cirrus_board_ptr, hdr);
/****************************************************
* Graphic Data Controller Registers
*/
temp = fb_cirrus_read_gdc_reg( cirrus_board_ptr, 0x12);
if (HDiv2)
temp |= 0x20;
else
temp &= ~0x20;
fb_cirrus_write_gdc_reg( cirrus_board_ptr, 0x12, temp);
/* Enable high-color modes */
fb_cirrus_write_gdc_reg(cirrus_board_ptr, 0x05, 0x40);
/* VGA graphics mode */
fb_cirrus_write_gdc_reg(cirrus_board_ptr, 0x06, 0x01);
return TRUE;
}
static void
cirrus_prepare_mode( void )
{
active_mode = &available_modes[CIRRUS_DISPLAY_MODE];
fb_var.bits_per_pixel = CIRRUS_DEFAULT_BPP;
fb_var.xres = active_mode->HDisplay;
fb_var.yres = active_mode->VDisplay;
fb_fix.line_length = (fb_var.xres * fb_var.bits_per_pixel + 7) / 8;
fb_fix.type = FB_TYPE_PACKED_PIXELS;
fb_fix.visual = FB_VISUAL_TRUECOLOR;
}
/*
* fb_cirrus device driver OPEN entry point
*/
rtems_device_driver
frame_buffer_open(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg
)
{
int r;
uint32_t smem_start, regs_start;
if (_Atomic_Flag_test_and_set(&driver_mutex, ATOMIC_ORDER_ACQUIRE) != 0 ) {
printk( "FB_CIRRUS could not lock driver_mutex\n" );
return RTEMS_UNSATISFIED;
}
r = cirrus_pci_read(&cirrus_board_info, &smem_start, ®s_start);
if ( r == RTEMS_UNSATISFIED )
return RTEMS_UNSATISFIED;
fb_fix.smem_start = (volatile char *)smem_start;
fb_fix.smem_len = 0x1000000;
cirrus_board_info.reg_base = (void *)regs_start;
cirrus_prepare_mode();
cirrus_set_mode( active_mode );
cirrus_adjust_frame( &cirrus_board_info, 0, 0);
if (1) {
uint32_t pixmask;
int x, y;
if(fb_var.bits_per_pixel == 32)
pixmask = 0xffffff;
else
pixmask = (1 << fb_var.bits_per_pixel) - 1;
printk("FB_CIRRUS: mode set, test patter output\n");
for(y = 0; y < fb_var.yres; y++) {
for(x = 0; x < fb_var.xres; x++) {
uint32_t color;
char *addr = (char *)fb_fix.smem_start;
addr += y * fb_fix.line_length;
addr += x * fb_var.bits_per_pixel / 8;
color = x & 1 ? 0 : y & 1 ? pixmask & 0x000ff00f : pixmask;
if(y == fb_var.yres - 1) {
if((x > 0) && (x < fb_var.xres-1))
color = pixmask & 0x00555555;
}
switch (fb_var.bits_per_pixel) {
case 8: *(volatile uint8_t*) addr = color;
break;
case 16: *(volatile uint16_t*) addr = color;
break;
case 24: *(volatile uint32_t*) addr =
(*(volatile uint32_t*) addr & 0xff000000) | color;
break;
case 32: *(volatile uint32_t*) addr = color;
break;
}
}
}
}
return RTEMS_SUCCESSFUL;
}
/*
* fb_cirrus device driver CLOSE entry point
*/
rtems_device_driver
frame_buffer_close(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg
)
{
_Atomic_Flag_clear(&driver_mutex, ATOMIC_ORDER_RELEASE);
/* restore previous state. for VGA this means return to text mode.
* leave out if graphics hardware has been initialized in
* frame_buffer_initialize() */
/* VGA text mode */
fb_cirrus_write_gdc_reg(&cirrus_board_info, 0x06, 0x00);
printk( "FB_CIRRUS: close called.\n" );
return RTEMS_SUCCESSFUL;
}
/*
* fb_cirrus device driver READ entry point.
*/
rtems_device_driver
frame_buffer_read(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg
)
{
rtems_libio_rw_args_t *rw_args = (rtems_libio_rw_args_t *)arg;
rw_args->bytes_moved = ((rw_args->offset + rw_args->count) > fb_fix.smem_len ) ? (fb_fix.smem_len - rw_args->offset) : rw_args->count;
memcpy(rw_args->buffer, (const void *) (fb_fix.smem_start + rw_args->offset), rw_args->bytes_moved);
return RTEMS_SUCCESSFUL;
}
/*
* frame_buffer device driver WRITE entry point.
*/
rtems_device_driver
frame_buffer_write(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg
)
{
rtems_libio_rw_args_t *rw_args = (rtems_libio_rw_args_t *)arg;
rw_args->bytes_moved = ((rw_args->offset + rw_args->count) > fb_fix.smem_len ) ? (fb_fix.smem_len - rw_args->offset) : rw_args->count;
memcpy( (void *) (fb_fix.smem_start + rw_args->offset), rw_args->buffer, rw_args->bytes_moved);
return RTEMS_SUCCESSFUL;
}
static int
get_fix_screen_info( struct fb_fix_screeninfo *info )
{
*info = fb_fix;
return 0;
}
static int
get_var_screen_info( struct fb_var_screeninfo *info )
{
*info = fb_var;
return 0;
}
/*
* IOCTL entry point -- This method is called to carry
* all services of this interface.
*/
rtems_device_driver
frame_buffer_control(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *arg
)
{
rtems_libio_ioctl_args_t *args = arg;
printk( "FB_CIRRUS ioctl called, cmd=%x\n", args->command );
switch( args->command ) {
case FBIOGET_FSCREENINFO:
args->ioctl_return = get_fix_screen_info( ( struct fb_fix_screeninfo * ) args->buffer );
break;
case FBIOGET_VSCREENINFO:
args->ioctl_return = get_var_screen_info( ( struct fb_var_screeninfo * ) args->buffer );
break;
case FBIOPUT_VSCREENINFO:
/* not implemented yet */
args->ioctl_return = -1;
return RTEMS_UNSATISFIED;
case FBIOGETCMAP:
/* no palette - truecolor mode */
args->ioctl_return = -1;
return RTEMS_UNSATISFIED;
case FBIOPUTCMAP:
/* no palette - truecolor mode */
args->ioctl_return = -1;
return RTEMS_UNSATISFIED;
default:
args->ioctl_return = 0;
break;
}
return RTEMS_SUCCESSFUL;
}