blob: d13c6e7cc8f12f6afcded394f0b9077d854c4e7b (
plain) (
tree)
|
|
/**
******************************************************************************
* @file stm32h7xx_hal_ltdc_ex.c
* @author MCD Application Team
* @brief LTDC Extension HAL module driver.
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
#if defined(HAL_LTDC_MODULE_ENABLED) && defined(HAL_DSI_MODULE_ENABLED)
#if defined (LTDC) && defined (DSI)
/** @defgroup LTDCEx LTDCEx
* @ingroup RTEMSBSPsARMSTM32H7
* @brief LTDC HAL module driver
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions
* @ingroup RTEMSBSPsARMSTM32H7
* @{
*/
/** @defgroup LTDCEx_Exported_Functions_Group1 Initialization and Configuration functions
* @ingroup RTEMSBSPsARMSTM32H7
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
##### Initialization and Configuration functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initialize and configure the LTDC
@endverbatim
* @{
*/
/**
* @brief Retrieve common parameters from DSI Video mode configuration structure
* @param hltdc pointer to a LTDC_HandleTypeDef structure that contains
* the configuration information for the LTDC.
* @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains
* the DSI video mode configuration parameters
* @note The implementation of this function is taking into account the LTDC
* polarities inversion as described in the current LTDC specification
* @retval HAL status
*/
HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg)
{
/* Retrieve signal polarities from DSI */
/* The following polarity is inverted:
LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH */
/* Note 1 : Code in line w/ Current LTDC specification */
hltdc->Init.DEPolarity = (VidCfg->DEPolarity == DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
hltdc->Init.VSPolarity = (VidCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AH : LTDC_VSPOLARITY_AL;
hltdc->Init.HSPolarity = (VidCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AH : LTDC_HSPOLARITY_AL;
/* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
/* hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29;
hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29;
hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29; */
/* Retrieve vertical timing parameters from DSI */
hltdc->Init.VerticalSync = VidCfg->VerticalSyncActive - 1U;
hltdc->Init.AccumulatedVBP = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch - 1U;
hltdc->Init.AccumulatedActiveH = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + VidCfg->VerticalActive - 1U;
hltdc->Init.TotalHeigh = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + VidCfg->VerticalActive + VidCfg->VerticalFrontPorch - 1U;
return HAL_OK;
}
/**
* @brief Retrieve common parameters from DSI Adapted command mode configuration structure
* @param hltdc pointer to a LTDC_HandleTypeDef structure that contains
* the configuration information for the LTDC.
* @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains
* the DSI command mode configuration parameters
* @note The implementation of this function is taking into account the LTDC
* polarities inversion as described in the current LTDC specification
* @retval HAL status
*/
HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg)
{
/* Retrieve signal polarities from DSI */
/* The following polarities are inverted:
LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH
LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH
LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/
/* Note 1 : Code in line w/ Current LTDC specification */
hltdc->Init.DEPolarity = (CmdCfg->DEPolarity == DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
hltdc->Init.VSPolarity = (CmdCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH;
hltdc->Init.HSPolarity = (CmdCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH;
/* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
/* hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29;
hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29;
hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29; */
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* LTDC && DSI */
#endif /* HAL_LTCD_MODULE_ENABLED && HAL_DSI_MODULE_ENABLED */
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
