/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (C) 2013, 2017 embedded brains GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <bsp/zynq-uart.h>
#include <bsp/zynq-uart-regs.h>
#include <bsp/irq.h>
#include <bspopts.h>
#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
static void zynq_uart_interrupt(void *arg)
{
rtems_termios_tty *tty = arg;
zynq_uart_context *ctx = rtems_termios_get_device_context(tty);
volatile zynq_uart *regs = ctx->regs;
uint32_t channel_sts;
if ((regs->irq_sts & (ZYNQ_UART_TIMEOUT | ZYNQ_UART_RTRIG)) != 0) {
regs->irq_sts = ZYNQ_UART_TIMEOUT | ZYNQ_UART_RTRIG;
do {
char c = (char) ZYNQ_UART_TX_RX_FIFO_FIFO_GET(regs->tx_rx_fifo);
rtems_termios_enqueue_raw_characters(tty, &c, 1);
channel_sts = regs->channel_sts;
} while ((channel_sts & ZYNQ_UART_CHANNEL_STS_REMPTY) == 0);
} else {
channel_sts = regs->channel_sts;
}
if (ctx->transmitting && (channel_sts & ZYNQ_UART_CHANNEL_STS_TEMPTY) != 0) {
rtems_termios_dequeue_characters(tty, 1);
}
}
#endif
static bool zynq_uart_first_open(
rtems_termios_tty *tty,
rtems_termios_device_context *base,
struct termios *term,
rtems_libio_open_close_args_t *args
)
{
#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
zynq_uart_context *ctx = (zynq_uart_context *) base;
volatile zynq_uart *regs = ctx->regs;
rtems_status_code sc;
#endif
rtems_termios_set_initial_baud(tty, ZYNQ_UART_DEFAULT_BAUD);
zynq_uart_initialize(base);
#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
regs->rx_timeout = 32;
regs->rx_fifo_trg_lvl = ZYNQ_UART_FIFO_DEPTH / 2;
regs->irq_dis = 0xffffffff;
regs->irq_sts = 0xffffffff;
regs->irq_en = ZYNQ_UART_RTRIG | ZYNQ_UART_TIMEOUT;
sc = rtems_interrupt_handler_install(
ctx->irq,
"UART",
RTEMS_INTERRUPT_SHARED,
zynq_uart_interrupt,
tty
);
if (sc != RTEMS_SUCCESSFUL) {
return false;
}
#endif
return true;
}
#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
static void zynq_uart_last_close(
rtems_termios_tty *tty,
rtems_termios_device_context *base,
rtems_libio_open_close_args_t *args
)
{
zynq_uart_context *ctx = (zynq_uart_context *) base;
rtems_interrupt_handler_remove(ctx->irq, zynq_uart_interrupt, tty);
}
#endif
static void zynq_uart_write_support(
rtems_termios_device_context *base,
const char *buf,
size_t len
)
{
#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
zynq_uart_context *ctx = (zynq_uart_context *) base;
volatile zynq_uart *regs = ctx->regs;
if (len > 0) {
ctx->transmitting = true;
regs->irq_sts = ZYNQ_UART_TEMPTY;
regs->irq_en = ZYNQ_UART_TEMPTY;
regs->tx_rx_fifo = ZYNQ_UART_TX_RX_FIFO_FIFO(buf[0]);
} else {
ctx->transmitting = false;
regs->irq_dis = ZYNQ_UART_TEMPTY;
}
#else
ssize_t i;
for (i = 0; i < len; ++i) {
zynq_uart_write_polled(base, buf[i]);
}
#endif
}
static bool zynq_uart_set_attributes(
rtems_termios_device_context *context,
const struct termios *term
)
{
#if 0
volatile zynq_uart *regs = zynq_uart_get_regs(minor);
uint32_t brgr = 0;
uint32_t bauddiv = 0;
int rc;
rc = zynq_cal_baud_rate(115200, &brgr, &bauddiv, regs->mode);
if (rc != 0)
return rc;
regs->control &= ~(ZYNQ_UART_CONTROL_RXEN | ZYNQ_UART_CONTROL_TXEN);
regs->baud_rate_gen = ZYNQ_UART_BAUD_RATE_GEN_CD(brgr);
regs->baud_rate_div = ZYNQ_UART_BAUD_RATE_DIV_BDIV(bauddiv);
regs->control |= ZYNQ_UART_CONTROL_RXEN | ZYNQ_UART_CONTROL_TXEN;
return true;
#else
return false;
#endif
}
const rtems_termios_device_handler zynq_uart_handler = {
.first_open = zynq_uart_first_open,
.set_attributes = zynq_uart_set_attributes,
.write = zynq_uart_write_support,
#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
.last_close = zynq_uart_last_close,
.mode = TERMIOS_IRQ_DRIVEN
#else
.poll_read = zynq_uart_read_polled,
.mode = TERMIOS_POLLED
#endif
};