/*
* Cirrus EP7312 Startup code
*
* Copyright (c) 2010 embedded brains GmbH & Co. KG
*
* Copyright (c) 2002 by Jay Monkman <jtm@smoothsmoothie.com>
*
* Copyright (c) 2002 by Charlie Steader <charlies@poliac.com>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <rtems/asm.h>
#include <rtems/score/cpu.h>
.section ".bsp_start_text", "ax"
.arm
/*******************************************************
standard exception vectors table
*** Must be located at address 0
********************************************************/
Vector_Init_Block:
ldr pc, handler_addr_reset
ldr pc, handler_addr_undef
ldr pc, handler_addr_swi
ldr pc, handler_addr_prefetch
ldr pc, handler_addr_abort
nop
ldr pc, handler_addr_irq
ldr pc, handler_addr_fiq
handler_addr_reset:
.word _start
handler_addr_undef:
.word _ARMV4_Exception_undef_default
handler_addr_swi:
.word _ARMV4_Exception_swi_default
handler_addr_prefetch:
.word _ARMV4_Exception_pref_abort_default
handler_addr_abort:
.word _ARMV4_Exception_data_abort_default
handler_addr_reserved:
.word _ARMV4_Exception_reserved_default
handler_addr_irq:
.word _ARMV4_Exception_interrupt
handler_addr_fiq:
.word _ARMV4_Exception_fiq_default
.globl _start
_start:
/* Set end of interrupt stack area */
ldr r7, =_ISR_Stack_area_end
/* Enter FIQ mode and set up the FIQ stack pointer */
mov r0, #(ARM_PSR_M_FIQ | ARM_PSR_I | ARM_PSR_F)
msr cpsr, r0
ldr r1, =bsp_stack_fiq_size
mov sp, r7
sub r7, r7, r1
/* Enter ABT mode and set up the ABT stack pointer */
mov r0, #(ARM_PSR_M_ABT | ARM_PSR_I | ARM_PSR_F)
msr cpsr, r0
ldr r1, =bsp_stack_abt_size
mov sp, r7
sub r7, r7, r1
/* Enter UND mode and set up the UND stack pointer */
mov r0, #(ARM_PSR_M_UND | ARM_PSR_I | ARM_PSR_F)
msr cpsr, r0
ldr r1, =bsp_stack_und_size
mov sp, r7
sub r7, r7, r1
/* Enter IRQ mode and set up the IRQ stack pointer */
mov r0, #(ARM_PSR_M_IRQ | ARM_PSR_I | ARM_PSR_F)
msr cpsr, r0
mov sp, r7
/*
* Enter SVC mode and set up the SVC stack pointer, reuse IRQ stack
* (interrupts are disabled).
*/
mov r0, #(ARM_PSR_M_SVC | ARM_PSR_I | ARM_PSR_F)
msr cpsr, r0
mov sp, r7
/* Stay in SVC mode */
/*
* Here is the code to initialize the low-level BSP environment
* (Chip Select, PLL, ....?)
*/
/* zero the bss */
LDR r1, =bsp_section_bss_end /* get end of ZI region */
LDR r0, =bsp_section_bss_begin /* load base address of ZI region */
zi_init:
MOV r2, #0
CMP r0, r1 /* loop whilst r0 < r1 */
STRLOT r2, [r0], #4
BLO zi_init
/* --- Now we enter the C code */
mov r0, #0
bl boot_card