/* ---------------------------------------------------------------------------- */
/* Atmel Microcontroller Software Support */
/* SAM Software Package License */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) 2015, Atmel Corporation */
/* */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following condition is met: */
/* */
/* - Redistributions of source code must retain the above copyright notice, */
/* this list of conditions and the disclaimer below. */
/* */
/* Atmel's name may not be used to endorse or promote products derived from */
/* this software without specific prior written permission. */
/* */
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ---------------------------------------------------------------------------- */
/** \file */
/** \addtogroup hsmci_module Working with HSMCI
* \ingroup mcid_module
*
* \section Purpose
*
* The HSMCI driver provides the interface to configure and use the HSMCI
* peripheral.
*
* \section Usage
*
* -# HSMCI_Enable(), MCI_Disable(): Enable/Disable HSMCI interface.
* -# HSMCI_Reset(): Reset HSMCI interface.
* -# HSMCI_Select(): HSMCI slot and buswidth selection
* (\ref Hsmci::HSMCI_SDCR).
* -# HSMCI_ConfigureMode(): Configure the MCI CLKDIV in the _MR register
* (\ref Hsmci::HSMCI_MR).
* -# HSMCI_EnableIt(), HSMCI_DisableIt(), HSMCI_GetItMask(), HSMCI_GetStatus()
* HSMCI Interrupt control (\ref Hsmci::HSMCI_IER, \ref Hsmci::HSMCI_IDR,
* \ref Hsmci::HSMCI_IMR, \ref Hsmci::HSMCI_SR).
* -# HSMCI_ConfigureTransfer(): Setup block length and count for MCI transfer
* (\ref Hsmci::HSMCI_BLKR).
* -# HSMCI_SendCmd(): Send SD/MMC command with argument
* (\ref Hsmci::HSMCI_ARGR, \ref Hsmci::HSMCI_CMDR).
* -# HSMCI_GetResponse(): Get SD/MMC response after command finished
* (\ref Hsmci::HSMCI_RSPR).
* -# HSMCI_ConfigureDma(): Configure MCI DMA transfer
* (\ref Hsmci::HSMCI_DMA).
* -# HSMCI_Configure(): Configure the HSMCI interface (\ref Hsmci::HSMCI_CFG).
* -# HSMCI_HsEnable(), HSMCI_IsHsEnabled(): High Speed control.
*
* For more accurate information, please look at the HSMCI section of the
* Datasheet.
*
* \sa \ref mcid_module
*
* Related files :\n
* \ref hsmci.h\n
* \ref hsmci.c.\n
*/
#ifndef HSMCID_H
#define HSMCID_H
/** \addtogroup hsmci_module
*@{
*/
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
/** \addtogroup hsmci_functions HSMCI Functions
* @{
*/
extern void HSMCI_Enable(Hsmci *pRMci);
extern void HSMCI_Disable(Hsmci *pRMci);
extern void HSMCI_Reset(Hsmci *pRMci, uint8_t bBackup);
extern void HSMCI_Select(Hsmci *pRMci, uint8_t bSlot, uint8_t bBusWidth);
extern void HSMCI_SetSlot(Hsmci *pRMci, uint8_t bSlot);
extern void HSMCI_SetBusWidth(Hsmci *pRMci, uint8_t bBusWidth);
extern uint8_t HSMCI_GetBusWidth(Hsmci *pRMci);
extern void HSMCI_ConfigureMode(Hsmci *pRMci, uint32_t dwMode);
extern uint32_t HSMCI_GetMode(Hsmci *pRMci);
extern void HSMCI_ProofEnable(Hsmci *pRMci, uint8_t bRdProof, uint8_t bWrProof);
extern void HSMCI_PadvCtl(Hsmci *pRMci, uint8_t bPadv);
extern void HSMCI_FByteEnable(Hsmci *pRMci, uint8_t bFByteEn);
extern uint8_t HSMCI_IsFByteEnabled(Hsmci *pRMci);
extern void HSMCI_DivCtrl(Hsmci *pRMci, uint32_t bClkDiv, uint8_t bPwsDiv);
extern void HSMCI_EnableIt(Hsmci *pRMci, uint32_t dwSources);
extern void HSMCI_DisableIt(Hsmci *pRMci, uint32_t dwSources);
extern uint32_t HSMCI_GetItMask(Hsmci *pRMci);
extern void HSMCI_ConfigureTransfer(Hsmci *pRMci, uint16_t wBlkLen,
uint16_t wCnt);
extern void HSMCI_SetBlockLen(Hsmci *pRMci, uint16_t wBlkSize);
extern void HSMCI_SetBlockCount(Hsmci *pRMci, uint16_t wBlkCnt);
extern void HSMCI_ConfigureCompletionTO(Hsmci *pRMci, uint32_t dwConfigure);
extern void HSMCI_ConfigureDataTO(Hsmci *pRMci, uint32_t dwConfigure);
extern void HSMCI_SendCmd(Hsmci *pRMci, uint32_t dwCmd, uint32_t dwArg);
extern uint32_t HSMCI_GetResponse(Hsmci *pRMci);
extern uint32_t HSMCI_Read(Hsmci *pRMci);
extern void HSMCI_ReadFifo(Hsmci *pRMci, uint8_t *pdwData, uint32_t dwSize);
extern void HSMCI_Write(Hsmci *pRMci, uint32_t dwData);
extern void HSMCI_WriteFifo(Hsmci *pRMci, uint8_t *pdwData, uint32_t dwSize);
extern uint32_t HSMCI_GetStatus(Hsmci *pRMci);
extern void HSMCI_ConfigureDma(Hsmci *pRMci, uint32_t dwConfigure);
extern void HSMCI_EnableDma(Hsmci *pRMci, uint8_t bEnable);
extern void HSMCI_Configure(Hsmci *pRMci, uint32_t dwConfigure);
extern void HSMCI_HsEnable(Hsmci *pRMci, uint8_t bHsEnable);
extern uint8_t HSMCI_IsHsEnabled(Hsmci *pRMci);
extern void HSMCI_BusWidthCtl(Hsmci *pRMci, uint8_t bBusWidth);
extern void HSMCI_SlotCtl(Hsmci *pRMci, uint8_t bSlot);
extern uint8_t HSMCI_GetSlot(Hsmci *pRMci);
extern void HSMCI_ConfigureWP(Hsmci *pRMci, uint32_t dwConfigure);
extern uint32_t HSMCI_GetWPStatus(Hsmci *pRMci);
#ifdef __cplusplus
}
#endif
/** @}*/
/**@}*/
#endif //#ifndef HSMCID_H
