/* SPDX-License-Identifier: BSD-2-Clause */
/*
* Copyright (c) 2016 embedded brains GmbH. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef LIBBSP_ARM_ATSAM_SC16IS752_H
#define LIBBSP_ARM_ATSAM_SC16IS752_H
#include <rtems/irq-extension.h>
#include <libchip/chip.h>
#include <dev/serial/sc16is752.h>
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/**
* @brief The SC16IS752 device context.
*
* All members are private to the device driver.
*/
typedef struct {
sc16is752_spi_context base;
Pin irq_pin;
rtems_interrupt_server_entry irqs_entry;
rtems_interrupt_server_action irqs_action;
uint32_t irqs_index;
} atsam_sc16is752_spi_context;
/**
* @brief The SC16IS752 device configuration.
*
* @see atsam_sc16is752_spi_create().
*/
typedef struct {
/**
* @brief The device file path for the new device.
*/
const char *device_path;
/**
* @brief The SC16IS752 mode.
*/
sc16is752_mode mode;
/**
* @brief The input frequency in Hertz of the SC16IS752 chip. See XTAL1 and
* XTAL2 pins.
*/
uint32_t input_frequency;
/**
* @brief The SPI bus device path.
*/
const char *spi_path;
/**
* @brief The SPI chip select (starts with 0, the SPI driver uses
* SPI_ChipSelect(1 << spi_chip_select)).
*/
uint8_t spi_chip_select;
/**
* @brief The SPI bus speed in Hertz.
*/
uint32_t spi_speed_hz;
/**
* @brief The interrupt pin, e.g. { PIO_PD28, PIOD, ID_PIOD, PIO_INPUT,
* PIO_IT_LOW_LEVEL }.
*/
const Pin irq_pin;
/**
* @brief The index to identify the interrupt server used for interrupt
* processing.
*/
uint32_t server_index;
} atsam_sc16is752_spi_config;
/**
* @brief Creates an SPI connected SC16IS752 device.
*
* This devices uses the interrupt server, see rtems_interrupt_server_create().
*
* The device claims the interrupt of the PIO block.
*
* @param[out] ctx is the device context. It may have an arbitrary content.
* @param config is the device configuration.
*
* @return See sc16is752_spi_create().
*/
int atsam_sc16is752_spi_create(
atsam_sc16is752_spi_context *ctx,
const atsam_sc16is752_spi_config *config
);
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* LIBBSP_ARM_ATSAM_SC16IS752_H */