1 files changed, 87 insertions, 0 deletions
diff --git a/bsd/freebsd/contrib/ntp/include/icom.h b/bsd/freebsd/contrib/ntp/include/icom.h
new file mode 100644
index 0000000..b271afb
--- /dev/null
+++ b/bsd/freebsd/contrib/ntp/include/icom.h
@@ -0,0 +1,87 @@
+/*
+ * Header file for ICOM radios
+ */
+#include "ntp_types.h"
+
+/*
+ * Common definitions
+ */
+#define P_ERMSG	0x1		/* trace bus error messages */
+#define P_TRACE 0x2		/* trace CI-V messges */
+#define RETRY	3		/* max packet retries */
+#define IBAUD	B1200		/* autotune port speed */
+
+/*
+ * Radio identifier codes
+ */
+#define IC1271	0x24
+#define IC1275	0x18
+#define IC271	0x20
+#define IC275	0x10
+#define IC375	0x12
+#define IC471	0x22
+#define IC475	0x14
+#define IC575	0x16
+#define IC725	0x28
+#define IC726	0x30
+#define IC735	0x04
+#define IC751	0x1c
+#define IC761	0x1e
+#define IC765	0x2c
+#define IC775	0x46
+#define IC781	0x26
+#define IC970	0x2e
+#define R7000	0x08
+#define R71	0x1a
+#define R7100	0x34
+#define R72	0x32
+#define R8500	0x4a
+#define R9000	0x2a
+
+/*
+ * CI-V frame codes
+ */
+#define PR	0xfe		/* preamble */
+#define TX	0xe0		/* controller address */
+#define FI	0xfd		/* end of message */
+#define ACK	0xfb		/* controller normal reply */
+#define NAK	0xfa		/* controller error reply */
+#define PAD	0xff		/* transmit padding */
+
+/*
+ * CI-V controller commands
+ */
+#define V_FREQT	0x00		/* freq set (transceive) */
+#define V_MODET	0x01		/* set mode (transceive) */
+#define V_RBAND	0x02		/* read band edge */
+#define V_RFREQ	0x03		/* read frequency */
+#define V_RMODE	0x04		/* read mode */
+#define V_SFREQ	0x05		/* set frequency */
+#define V_SMODE	0x06		/* set mode */
+#define V_SVFO	0x07		/* select vfo */
+#define V_SMEM	0x08		/* select channel/bank */
+#define V_WRITE	0x09		/* write channel */
+#define V_VFOM	0x0a		/* memory -> vfo */
+#define V_CLEAR	0x0b		/* clear channel */
+#define V_ROFFS	0x0c		/* read tx offset */
+#define V_SOFFS	0x0d		/* write tx offset */
+#define V_SCAN	0x0e		/* scan control */
+#define V_SPLIT	0x0f		/* split control */
+#define V_DIAL	0x10		/* set dial tuning step */
+#define V_ATTEN	0x11		/* set attenuator */
+#define V_SANT	0x12		/* select antenna */
+#define V_ANNC	0x13		/* announce control */
+#define V_WRCTL	0x14		/* write controls */
+#define V_RDCTL	0x15		/* read controls */
+#define V_TOGL	0x16		/* set switches */
+#define V_ASCII	0x17		/* send CW message */
+#define V_POWER	0x18		/* power control */
+#define V_RDID	0x19		/* read model ID */
+#define V_SETW	0x1a		/* read/write channel/bank data */
+#define V_CTRL	0x7f		/* miscellaneous control */
+
+/*
+ * Function prototypes
+ */
+int	icom_init		(const char *, int, int);
+int	icom_freq		(int, int, double);