diff options
Diffstat (limited to 'ipsec-tools/src/setkey/sample.cf')
| -rw-r--r-- | ipsec-tools/src/setkey/sample.cf | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/ipsec-tools/src/setkey/sample.cf b/ipsec-tools/src/setkey/sample.cf new file mode 100644 index 00000000..c64fd366 --- /dev/null +++ b/ipsec-tools/src/setkey/sample.cf @@ -0,0 +1,217 @@ +# Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# 3. Neither the name of the project nor the names of its contributors +# may be used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +# ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE +# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. + +# There are sample scripts for IPsec configuration by manual keying. +# A security association is uniquely identified by a triple consisting +# of a Security Parameter Index (SPI), an IP Destination Address, and a +# security protocol (AH or ESP) identifier. You must take care of these +# parameters when you configure by manual keying. + +# ESP transport mode is recommended for TCP port number 110 between +# Host-A and Host-B. Encryption algorithm is blowfish-cbc whose key +# is "kamekame", and authentication algorithm is hmac-sha1 whose key +# is "this is the test key". +# +# ============ ESP ============ +# | | +# Host-A Host-B +# fec0::10 -------------------- fec0::11 +# +# At Host-A and Host-B, +spdadd fec0::10[any] fec0::11[110] tcp -P out ipsec + esp/transport//use ; +spdadd fec0::11[110] fec0::10[any] tcp -P in ipsec + esp/transport//use ; +add fec0::10 fec0::11 esp 0x10001 + -m transport + -E blowfish-cbc "kamekame" + -A hmac-sha1 "this is the test key" ; +add fec0::11 fec0::10 esp 0x10002 + -m transport + -E blowfish-cbc "kamekame" + -A hmac-sha1 "this is the test key" ; + +# "[any]" is wildcard of port number. Note that "[0]" is the number of +# zero in port number. + +# Security protocol is old AH tunnel mode, i.e. RFC1826, with keyed-md5 +# whose key is "this is the test" as authentication algorithm. +# That protocol takes place between Gateway-A and Gateway-B. +# +# ======= AH ======= +# | | +# Network-A Gateway-A Gateway-B Network-B +# 10.0.1.0/24 ---- 172.16.0.1 ----- 172.16.0.2 ---- 10.0.2.0/24 +# +# At Gateway-A: +spdadd 10.0.1.0/24 10.0.2.0/24 any -P out ipsec + ah/tunnel/172.16.0.1-172.16.0.2/require ; +spdadd 10.0.2.0/24 10.0.1.0/24 any -P in ipsec + ah/tunnel/172.16.0.2-172.16.0.1/require ; +add 172.16.0.1 172.16.0.2 ah-old 0x10003 + -m any + -A keyed-md5 "this is the test" ; +add 172.16.0.2 172.16.0.1 ah-old 0x10004 + -m any + -A keyed-md5 "this is the test" ; + +# If port number field is omitted such above then "[any]" is employed. +# -m specifies the mode of SA to be used. "-m any" means wildcard of +# mode of security protocol. You can use this SAs for both tunnel and +# transport mode. + +# At Gateway-B. Attention to the selector and peer's IP address for tunnel. +spdadd 10.0.2.0/24 10.0.1.0/24 any -P out ipsec + ah/tunnel/172.16.0.2-172.16.0.1/require ; +spdadd 10.0.1.0/24 10.0.2.0/24 any -P in ipsec + ah/tunnel/172.16.0.1-172.16.0.2/require ; +add 172.16.0.1 172.16.0.2 ah-old 0x10003 + -m tunnel + -A keyed-md5 "this is the test" ; +add 172.16.0.2 172.16.0.1 ah-old 0x10004 + -m tunnel + -A keyed-md5 "this is the test" ; + +# AH transport mode followed by ESP tunnel mode is required between +# Gateway-A and Gateway-B. +# Encryption algorithm is 3des-cbc, and authentication algorithm for ESP +# is hmac-sha1. Authentication algorithm for AH is hmac-md5. +# +# ========== AH ========= +# | ======= ESP ===== | +# | | | | +# Network-A Gateway-A Gateway-B Network-B +# fec0:0:0:1::/64 --- fec0:0:0:1::1 ---- fec0:0:0:2::1 --- fec0:0:0:2::/64 +# +# At Gateway-A: +spdadd fec0:0:0:1::/64 fec0:0:0:2::/64 any -P out ipsec + esp/tunnel/fec0:0:0:1::1-fec0:0:0:2::1/require + ah/transport//require ; +spdadd fec0:0:0:2::/64 fec0:0:0:1::/64 any -P in ipsec + esp/tunnel/fec0:0:0:2::1-fec0:0:0:1::1/require + ah/transport//require ; +add fec0:0:0:1::1 fec0:0:0:2::1 esp 0x10001 + -m tunnel + -E 3des-cbc "kamekame12341234kame1234" + -A hmac-sha1 "this is the test key" ; +add fec0:0:0:1::1 fec0:0:0:2::1 ah 0x10001 + -m transport + -A hmac-md5 "this is the test" ; +add fec0:0:0:2::1 fec0:0:0:1::1 esp 0x10001 + -m tunnel + -E 3des-cbc "kamekame12341234kame1234" + -A hmac-sha1 "this is the test key" ; +add fec0:0:0:2::1 fec0:0:0:1::1 ah 0x10001 + -m transport + -A hmac-md5 "this is the test" ; + +# ESP tunnel mode is required between Host-A and Gateway-A. +# Encryption algorithm is cast128-cbc, and authentication algorithm +# for ESP is hmac-sha1. +# ESP transport mode is recommended between Host-A and Host-B. +# Encryption algorithm is rc5-cbc, and authentication algorithm +# for ESP is hmac-md5. +# +# ================== ESP ================= +# | ======= ESP ======= | +# | | | | +# Host-A Gateway-A Host-B +# fec0:0:0:1::1 ---- fec0:0:0:2::1 ---- fec0:0:0:2::2 +# +# At Host-A: +spdadd fec0:0:0:1::1[any] fec0:0:0:2::2[80] tcp -P out ipsec + esp/transport//use + esp/tunnel/fec0:0:0:1::1-fec0:0:0:2::1/require ; +spdadd fec0:0:0:2::1[80] fec0:0:0:1::1[any] tcp -P in ipsec + esp/transport//use + esp/tunnel/fec0:0:0:2::1-fec0:0:0:1::1/require ; +add fec0:0:0:1::1 fec0:0:0:2::2 esp 0x10001 + -m transport + -E cast128-cbc "12341234" + -A hmac-sha1 "this is the test key" ; +add fec0:0:0:1::1 fec0:0:0:2::1 esp 0x10002 + -E rc5-cbc "kamekame" + -A hmac-md5 "this is the test" ; +add fec0:0:0:2::2 fec0:0:0:1::1 esp 0x10003 + -m transport + -E cast128-cbc "12341234" + -A hmac-sha1 "this is the test key" ; +add fec0:0:0:2::1 fec0:0:0:1::1 esp 0x10004 + -E rc5-cbc "kamekame" + -A hmac-md5 "this is the test" ; + +# By "get" command, you can get a entry of either SP or SA. +get fec0:0:0:1::1 fec0:0:0:2::2 ah 0x10004 ; + +# Also delete command, you can delete a entry of either SP or SA. +spddelete fec0:0:0:1::/64 fec0:0:0:2::/64 any -P out; +delete fec0:0:0:1::1 fec0:0:0:2::2 ah 0x10004 ; + +# By dump command, you can dump all entry of either SP or SA. +dump ; +spddump ; +dump esp ; +flush esp ; + +# By flush command, you can flush all entry of either SP or SA. +flush ; +spdflush ; + +# "flush" and "dump" commands can specify a security protocol. +dump esp ; +flush ah ; + +# XXX +add ::1 ::1 esp 10001 -m transport -E null ; +add ::1 ::1 esp 10002 -m transport -E des-deriv "12341234" ; +add ::1 ::1 esp-old 10003 -m transport -E des-32iv "12341234" ; +add ::1 ::1 esp 10004 -m transport -E null -A null ; +add ::1 ::1 esp 10005 -m transport -E null -A hmac-md5 "1234123412341234" ; +add ::1 ::1 esp 10006 -m tunnel -E null -A hmac-sha1 "12341234123412341234" ; +add ::1 ::1 esp 10007 -m transport -E null -A keyed-md5 "1234123412341234" ; +add ::1 ::1 esp 10008 -m any -E null -A keyed-sha1 "12341234123412341234" ; +add ::1 ::1 esp 10009 -m transport -E des-cbc "testtest" ; +add ::1 ::1 esp 10010 -m transport -E 3des-cbc "testtest12341234testtest" ; +add ::1 ::1 esp 10011 -m tunnel -E cast128-cbc "testtest1234" ; +add ::1 ::1 esp 10012 -m tunnel -E blowfish-cbc "testtest1234" ; +add ::1 ::1 esp 10013 -m tunnel -E rc5-cbc "testtest1234" ; +add ::1 ::1 esp 10014 -m any -E rc5-cbc "testtest1234" ; +add ::1 ::1 esp 10015 -m transport -f zero-pad -E null ; +add ::1 ::1 esp 10016 -m tunnel -f random-pad -r 8 -lh 100 -ls 80 -E null ; +add ::1 ::1 esp 10017 -m transport -f seq-pad -f nocyclic-seq -E null ; +add ::1 ::1 esp 10018 -m transport -E null ; +#add ::1 ::1 ah 20000 -m transport -A null ; +add ::1 ::1 ah 20001 -m any -A hmac-md5 "1234123412341234"; +add ::1 ::1 ah 20002 -m tunnel -A hmac-sha1 "12341234123412341234"; +add ::1 ::1 ah 20003 -m transport -A keyed-md5 "1234123412341234"; +add ::1 ::1 ah-old 20004 -m transport -A keyed-md5 "1234123412341234"; +add ::1 ::1 ah 20005 -m transport -A keyed-sha1 "12341234123412341234"; +#add ::1 ::1 ipcomp 30000 -C oui ; +add ::1 ::1 ipcomp 30001 -C deflate ; +#add ::1 ::1 ipcomp 30002 -C lzs ; + +# enjoy. |