diff options
Diffstat (limited to 'ipsec-tools/rpm/suse/racoon.init')
| -rw-r--r-- | ipsec-tools/rpm/suse/racoon.init | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/ipsec-tools/rpm/suse/racoon.init b/ipsec-tools/rpm/suse/racoon.init new file mode 100644 index 00000000..15321ce8 --- /dev/null +++ b/ipsec-tools/rpm/suse/racoon.init @@ -0,0 +1,168 @@ +#! /bin/sh +# Copyright (c) 2001-2002 SuSE GmbH Nuernberg, Germany. +# +# Author: Michal Ludvig <feedback@suse.de>, 2004 +# +# /etc/init.d/ipsec-tools +# and its symbolic link +# /usr/sbin/rcipsec-tools +# +# System startup script for the IPsec key management daemon +# +### BEGIN INIT INFO +# Provides: racoon +# Required-Start: $remote_fs $named $syslog +# Required-Stop: $remote_fs $named $syslog +# Default-Start: 3 5 +# Default-Stop: 0 1 2 6 +# Description: IPsec key management daemon +### END INIT INFO + +SETKEY="IPsec policies" +SETKEY_BIN=/usr/sbin/setkey +SETKEY_CONF=/etc/racoon/setkey.conf + +RACOON="IPsec IKE daemon (racoon)" +RACOON_BIN=/usr/sbin/racoon +RACOON_CONF=/etc/racoon/racoon.conf +RACOON_PIDFILE=/var/run/racoon.pid + +test -x $SETKEY_BIN || exit 5 +test -x $RACOON_BIN || exit 5 + +test -f /etc/sysconfig/racoon && . /etc/sysconfig/racoon + +# Shell functions sourced from /etc/rc.status: +# rc_check check and set local and overall rc status +# rc_status check and set local and overall rc status +# rc_status -v ditto but be verbose in local rc status +# rc_status -v -r ditto and clear the local rc status +# rc_failed set local and overall rc status to failed +# rc_failed <num> set local and overall rc status to <num><num> +# rc_reset clear local rc status (overall remains) +# rc_exit exit appropriate to overall rc status +. /etc/rc.status + +# First reset status of this service +rc_reset + +# Return values acc. to LSB for all commands but status: +# 0 - success +# 1 - generic or unspecified error +# 2 - invalid or excess argument(s) +# 3 - unimplemented feature (e.g. "reload") +# 4 - insufficient privilege +# 5 - program is not installed +# 6 - program is not configured +# 7 - program is not running +# +# Note that starting an already running service, stopping +# or restarting a not-running service as well as the restart +# with force-reload (in case signalling is not supported) are +# considered a success. + +case "$1" in + start) + # Setting up SPD policies is not required. + if [ -f $SETKEY_CONF ]; then + echo -n "Setting up $SETKEY" + $SETKEY_BIN $SETKEY_OPTIONS -f $SETKEY_CONF + rc_status -v + rc_reset + fi + + echo -n "Starting $RACOON " + ## If there is no conf file, skip starting of ddtd + ## and return with "program not configured" + if ! [ -f $RACOON_CONF ]; then + echo -e -n "... no configuration file found" + rc_status -s + # service is not configured + rc_failed 6 + rc_exit + fi + + # startproc should return 0, even if service is + # already running to match LSB spec. + startproc $RACOON_BIN $RACOON_OPTIONS -f $RACOON_CONF + rc_status -v + ;; + + stop) + echo -n "Shutting down $RACOON" + ## Stop daemon with killproc(8) and if this fails + ## set echo the echo return value. + + killproc -p $RACOON_PIDFILE -TERM $RACOON_BIN + + # Remember status and be verbose + rc_status -v + rc_reset + + # Flush SPD policies if required + if [ -n "$SETKEY_FLUSH_OPTIONS" ]; then + echo -n "Flushing $SETKEY" + $SETKEY_BIN $SETKEY_FLUSH_OPTIONS + rc_status -v + fi + ;; + try-restart) + ## Stop the service and if this succeeds (i.e. the + ## service was running before), start it again. + $0 stop && $0 start + + # Remember status and be quiet + rc_status + ;; + restart) + ## Stop the service and regardless of whether it was + ## running or not, start it again. + $0 stop + $0 start + + # Remember status and be quiet + rc_status + ;; + force-reload) + ## Signal the daemon to reload its config. Most daemons + ## do this on signal 1 (SIGHUP). + ## If it does not support it, restart. + + echo -n "Reload service $RACOON" + killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN + rc_status -v + ;; + reload) + ## Like force-reload, but if daemon does not support + ## signalling, do nothing (!) + + echo -n "Reload service $RACOON" + killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN + rc_status -v + ;; + status) + echo -n "Checking for $RACOON: " + ## Check status with checkproc(8), if process is running + ## checkproc will return with exit status 0. + + # Status has a slightly different for the status command: + # 0 - service running + # 1 - service dead, but /var/run/ pid file exists + # 2 - service dead, but /var/lock/ lock file exists + # 3 - service not running + + checkproc -p $RACOON_PIDFILE $RACOON_BIN + rc_status -v + ;; + probe) + ## Optional: Probe for the necessity of a reload, + ## give out the argument which is required for a reload. + + test "$RACOON_CONF" -nt "$RACOON_PIDFILE" && echo reload + ;; + *) + echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}" + exit 1 + ;; +esac +rc_exit |