diff options
Diffstat (limited to 'freebsd/sys/dev/mii/rgephyreg.h')
| -rw-r--r-- | freebsd/sys/dev/mii/rgephyreg.h | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/freebsd/sys/dev/mii/rgephyreg.h b/freebsd/sys/dev/mii/rgephyreg.h new file mode 100644 index 00000000..2a00517e --- /dev/null +++ b/freebsd/sys/dev/mii/rgephyreg.h @@ -0,0 +1,186 @@ +/*- + * Copyright (c) 2003 + * Bill Paul <wpaul@windriver.com>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#ifndef _DEV_MII_RGEPHYREG_H_ +#define _DEV_MII_RGEPHYREG_H_ + +#define RGEPHY_8211B 2 +#define RGEPHY_8211C 3 +#define RGEPHY_8211F 6 + +/* + * RealTek 8169S/8110S gigE PHY registers + */ + +#define RGEPHY_MII_BMCR 0x00 +#define RGEPHY_BMCR_RESET 0x8000 +#define RGEPHY_BMCR_LOOP 0x4000 +#define RGEPHY_BMCR_SPD0 0x2000 /* speed select, lower bit */ +#define RGEPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */ +#define RGEPHY_BMCR_PDOWN 0x0800 /* Power down */ +#define RGEPHY_BMCR_ISO 0x0400 /* Isolate */ +#define RGEPHY_BMCR_STARTNEG 0x0200 /* Restart autoneg */ +#define RGEPHY_BMCR_FDX 0x0100 /* Duplex mode */ +#define RGEPHY_BMCR_CTEST 0x0080 /* Collision test enable */ +#define RGEPHY_BMCR_SPD1 0x0040 /* Speed select, upper bit */ + +#define RGEPHY_S1000 RGEPHY_BMCR_SPD1 /* 1000mbps */ +#define RGEPHY_S100 RGEPHY_BMCR_SPD0 /* 100mpbs */ +#define RGEPHY_S10 0 /* 10mbps */ + +#define RGEPHY_MII_BMSR 0x01 +#define RGEPHY_BMSR_100T4 0x8000 /* 100 base T4 capable */ +#define RGEPHY_BMSR_100TXFDX 0x4000 /* 100 base Tx full duplex capable */ +#define RGEPHY_BMSR_100TXHDX 0x2000 /* 100 base Tx half duplex capable */ +#define RGEPHY_BMSR_10TFDX 0x1000 /* 10 base T full duplex capable */ +#define RGEPHY_BMSR_10THDX 0x0800 /* 10 base T half duplex capable */ +#define RGEPHY_BMSR_100T2FDX 0x0400 /* 100 base T2 full duplex capable */ +#define RGEPHY_BMSR_100T2HDX 0x0200 /* 100 base T2 half duplex capable */ +#define RGEPHY_BMSR_EXTSTS 0x0100 /* Extended status present */ +#define RGEPHY_BMSR_PRESUB 0x0040 /* Preamble surpression */ +#define RGEPHY_BMSR_ACOMP 0x0020 /* Autoneg complete */ +#define RGEPHY_BMSR_RFAULT 0x0010 /* Remote fault condition occurred */ +#define RGEPHY_BMSR_ANEG 0x0008 /* Autoneg capable */ +#define RGEPHY_BMSR_LINK 0x0004 /* Link status */ +#define RGEPHY_BMSR_JABBER 0x0002 /* Jabber detected */ +#define RGEPHY_BMSR_EXT 0x0001 /* Extended capability */ + +#define RGEPHY_MII_ANAR 0x04 +#define RGEPHY_ANAR_NP 0x8000 /* Next page */ +#define RGEPHY_ANAR_RF 0x2000 /* Remote fault */ +#define RGEPHY_ANAR_ASP 0x0800 /* Asymmetric Pause */ +#define RGEPHY_ANAR_PC 0x0400 /* Pause capable */ +#define RGEPHY_ANAR_T4 0x0200 /* local device supports 100bT4 */ +#define RGEPHY_ANAR_TX_FD 0x0100 /* local device supports 100bTx FD */ +#define RGEPHY_ANAR_TX 0x0080 /* local device supports 100bTx */ +#define RGEPHY_ANAR_10_FD 0x0040 /* local device supports 10bT FD */ +#define RGEPHY_ANAR_10 0x0020 /* local device supports 10bT */ +#define RGEPHY_ANAR_SEL 0x001F /* selector field, 00001=Ethernet */ + +#define RGEPHY_MII_ANLPAR 0x05 +#define RGEPHY_ANLPAR_NP 0x8000 /* Next page */ +#define RGEPHY_ANLPAR_RF 0x2000 /* Remote fault */ +#define RGEPHY_ANLPAR_ASP 0x0800 /* Asymmetric Pause */ +#define RGEPHY_ANLPAR_PC 0x0400 /* Pause capable */ +#define RGEPHY_ANLPAR_T4 0x0200 /* link partner supports 100bT4 */ +#define RGEPHY_ANLPAR_TX_FD 0x0100 /* link partner supports 100bTx FD */ +#define RGEPHY_ANLPAR_TX 0x0080 /* link partner supports 100bTx */ +#define RGEPHY_ANLPAR_10_FD 0x0040 /* link partner supports 10bT FD */ +#define RGEPHY_ANLPAR_10 0x0020 /* link partner supports 10bT */ +#define RGEPHY_ANLPAR_SEL 0x001F /* selector field, 00001=Ethernet */ + +#define RGEPHY_SEL_TYPE 0x0001 /* ethernet */ + +#define RGEPHY_MII_ANER 0x06 +#define RGEPHY_ANER_PDF 0x0010 /* Parallel detection fault */ +#define RGEPHY_ANER_LPNP 0x0008 /* Link partner can next page */ +#define RGEPHY_ANER_NP 0x0004 /* Local PHY can next page */ +#define RGEPHY_ANER_RX 0x0002 /* Next page received */ +#define RGEPHY_ANER_LPAN 0x0001 /* Link partner autoneg capable */ + +#define RGEPHY_MII_NEXTP 0x07 /* Next page */ + +#define RGEPHY_MII_NEXTP_LP 0x08 /* Next page of link partner */ + +#define RGEPHY_MII_1000CTL 0x09 /* 1000baseT control */ +#define RGEPHY_1000CTL_TST 0xE000 /* test modes */ +#define RGEPHY_1000CTL_MSE 0x1000 /* Master/Slave manual enable */ +#define RGEPHY_1000CTL_MSC 0x0800 /* Master/Slave select */ +#define RGEPHY_1000CTL_RD 0x0400 /* Repeater/DTE */ +#define RGEPHY_1000CTL_AFD 0x0200 /* Advertise full duplex */ +#define RGEPHY_1000CTL_AHD 0x0100 /* Advertise half duplex */ + +#define RGEPHY_TEST_TX_JITTER 0x2000 +#define RGEPHY_TEST_TX_JITTER_MASTER_MODE 0x4000 +#define RGEPHY_TEST_TX_JITTER_SLAVE_MODE 0x6000 +#define RGEPHY_TEST_TX_DISTORTION 0x8000 + +#define RGEPHY_MII_1000STS 0x0A /* 1000baseT status */ +#define RGEPHY_1000STS_MSF 0x8000 /* Master/slave fault */ +#define RGEPHY_1000STS_MSR 0x4000 /* Master/slave result */ +#define RGEPHY_1000STS_LRS 0x2000 /* Local receiver status */ +#define RGEPHY_1000STS_RRS 0x1000 /* Remote receiver status */ +#define RGEPHY_1000STS_LPFD 0x0800 /* Link partner can FD */ +#define RGEPHY_1000STS_LPHD 0x0400 /* Link partner can HD */ +#define RGEPHY_1000STS_IEC 0x00FF /* Idle error count */ + +#define RGEPHY_MII_EXTSTS 0x0F /* Extended status */ +#define RGEPHY_EXTSTS_X_FD_CAP 0x8000 /* 1000base-X FD capable */ +#define RGEPHY_EXTSTS_X_HD_CAP 0x4000 /* 1000base-X HD capable */ +#define RGEPHY_EXTSTS_T_FD_CAP 0x2000 /* 1000base-T FD capable */ +#define RGEPHY_EXTSTS_T_HD_CAP 0x1000 /* 1000base-T HD capable */ + +/* RTL8211B(L)/RTL8211C(L) */ +#define RGEPHY_MII_PCR 0x10 /* PHY Specific control register */ +#define RGEPHY_PCR_ASSERT_CRS 0x0800 +#define RGEPHY_PCR_FORCE_LINK 0x0400 +#define RGEPHY_PCR_MDI_MASK 0x0060 +#define RGEPHY_PCR_MDIX_AUTO 0x0040 +#define RGEPHY_PCR_MDIX_MANUAL 0x0020 +#define RGEPHY_PCR_MDI_MANUAL 0x0000 +#define RGEPHY_PCR_CLK125_DIS 0x0010 +#define RGEPHY_PCR_JABBER_DIS 0x0001 + +/* RTL8211B(L)/RTL8211C(L) */ +#define RGEPHY_MII_SSR 0x11 /* PHY Specific status register */ +#define RGEPHY_SSR_S1000 0x8000 /* 1000Mbps */ +#define RGEPHY_SSR_S100 0x4000 /* 100Mbps */ +#define RGEPHY_SSR_S10 0x0000 /* 10Mbps */ +#define RGEPHY_SSR_SPD_MASK 0xc000 +#define RGEPHY_SSR_FDX 0x2000 /* full duplex */ +#define RGEPHY_SSR_PAGE_RECEIVED 0x1000 /* new page received */ +#define RGEPHY_SSR_SPD_DPLX_RESOLVED 0x0800 /* speed/duplex resolved */ +#define RGEPHY_SSR_LINK 0x0400 /* link up */ +#define RGEPHY_SSR_MDI_XOVER 0x0040 /* MDI crossover */ +#define RGEPHY_SSR_ALDPS 0x0008 /* RTL8211C(L) only */ +#define RGEPHY_SSR_JABBER 0x0001 /* Jabber */ + +/* RTL8211F */ +#define RGEPHY_F_MII_PCR1 0x18 /* PHY Specific control register 1 */ +#define RGEPHY_F_PCR1_MDI_MM 0x0200 /* MDI / MDIX Manual Mode */ +#define RGEPHY_F_PCR1_MDI_MODE 0x0100 /* MDI Mode (0=MDIX,1=MDI) */ +#define RGEPHY_F_PCR1_ALDPS_EN 0x0004 /* Link Down Power Saving Enable */ + +/* RTL8211F */ +#define RGEPHY_F_MII_SSR 0x1A /* PHY Specific status register */ +#define RGEPHY_F_SSR_S1000 0x0020 /* 1000Mbps */ +#define RGEPHY_F_SSR_S100 0x0010 /* 100Mbps */ +#define RGEPHY_F_SSR_S10 0x0000 /* 10Mbps */ +#define RGEPHY_F_SSR_SPD_MASK 0x0030 +#define RGEPHY_F_SSR_FDX 0x0008 /* full duplex */ +#define RGEPHY_F_SSR_LINK 0x0004 /* link up */ +#define RGEPHY_F_SSR_MDI 0x0002 /* MDI/MDIX */ +#define RGEPHY_F_SSR_JABBER 0x0001 /* Jabber */ + +#endif /* _DEV_RGEPHY_MIIREG_H_ */ |