diff options
Diffstat (limited to 'freebsd/sys/dev/e1000/e1000_ich8lan.h')
| -rw-r--r-- | freebsd/sys/dev/e1000/e1000_ich8lan.h | 369 |
1 files changed, 200 insertions, 169 deletions
diff --git a/freebsd/sys/dev/e1000/e1000_ich8lan.h b/freebsd/sys/dev/e1000/e1000_ich8lan.h index 2935af56..bf928981 100644 --- a/freebsd/sys/dev/e1000/e1000_ich8lan.h +++ b/freebsd/sys/dev/e1000/e1000_ich8lan.h @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2010, Intel Corporation + Copyright (c) 2001-2013, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without @@ -35,212 +35,243 @@ #ifndef _E1000_ICH8LAN_H_ #define _E1000_ICH8LAN_H_ -#define ICH_FLASH_GFPREG 0x0000 -#define ICH_FLASH_HSFSTS 0x0004 -#define ICH_FLASH_HSFCTL 0x0006 -#define ICH_FLASH_FADDR 0x0008 -#define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_GFPREG 0x0000 +#define ICH_FLASH_HSFSTS 0x0004 +#define ICH_FLASH_HSFCTL 0x0006 +#define ICH_FLASH_FADDR 0x0008 +#define ICH_FLASH_FDATA0 0x0010 /* Requires up to 10 seconds when MNG might be accessing part. */ -#define ICH_FLASH_READ_COMMAND_TIMEOUT 10000000 -#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000 -#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000 -#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF -#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 +#define ICH_FLASH_READ_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF +#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 -#define ICH_CYCLE_READ 0 -#define ICH_CYCLE_WRITE 2 -#define ICH_CYCLE_ERASE 3 +#define ICH_CYCLE_READ 0 +#define ICH_CYCLE_WRITE 2 +#define ICH_CYCLE_ERASE 3 -#define FLASH_GFPREG_BASE_MASK 0x1FFF -#define FLASH_SECTOR_ADDR_SHIFT 12 +#define FLASH_GFPREG_BASE_MASK 0x1FFF +#define FLASH_SECTOR_ADDR_SHIFT 12 -#define ICH_FLASH_SEG_SIZE_256 256 -#define ICH_FLASH_SEG_SIZE_4K 4096 -#define ICH_FLASH_SEG_SIZE_8K 8192 -#define ICH_FLASH_SEG_SIZE_64K 65536 -#define ICH_FLASH_SECTOR_SIZE 4096 +#define ICH_FLASH_SEG_SIZE_256 256 +#define ICH_FLASH_SEG_SIZE_4K 4096 +#define ICH_FLASH_SEG_SIZE_8K 8192 +#define ICH_FLASH_SEG_SIZE_64K 65536 -#define ICH_FLASH_REG_MAPSIZE 0x00A0 - -#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ -#define E1000_ICH_FWSM_DISSW 0x10000000 /* FW Disables SW Writes */ +#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ /* FW established a valid mode */ -#define E1000_ICH_FWSM_FW_VALID 0x00008000 +#define E1000_ICH_FWSM_FW_VALID 0x00008000 +#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ +#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 -#define E1000_ICH_MNG_IAMT_MODE 0x2 +#define E1000_ICH_MNG_IAMT_MODE 0x2 -#define E1000_FWSM_PROXY_MODE 0x00000008 /* FW is in proxy mode */ +#define E1000_FWSM_WLOCK_MAC_MASK 0x0380 +#define E1000_FWSM_WLOCK_MAC_SHIFT 7 /* Shared Receive Address Registers */ -#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) -#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) -#define E1000_SHRAH_AV 0x80000000 /* Addr Valid bit */ -#define E1000_SHRAH_MAV 0x40000000 /* Multicast Addr Valid bit */ - -#define E1000_H2ME 0x05B50 /* Host to ME */ -#define E1000_H2ME_LSECREQ 0x00000001 /* Linksec Request */ -#define E1000_H2ME_LSECA 0x00000002 /* Linksec Active */ -#define E1000_H2ME_LSECSF 0x00000004 /* Linksec Failed */ -#define E1000_H2ME_LSECD 0x00000008 /* Linksec Disabled */ -#define E1000_H2ME_SLCAPD 0x00000010 /* Start LCAPD */ -#define E1000_H2ME_IPV4_ARP_EN 0x00000020 /* Arp Offload enable bit */ -#define E1000_H2ME_IPV6_NS_EN 0x00000040 /* NS Offload enable bit */ - -#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_OFF1_OFF2 << 8) | \ - (ID_LED_OFF1_ON2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_ICH_NVM_SIG_WORD 0x13 -#define E1000_ICH_NVM_SIG_MASK 0xC000 -#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 -#define E1000_ICH_NVM_SIG_VALUE 0x80 - -#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 - -#define E1000_FEXTNVM_SW_CONFIG 1 -#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M */ - -#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 - -#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL - -#define E1000_ICH_RAR_ENTRIES 7 -#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ - -#define PHY_PAGE_SHIFT 5 -#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ - ((reg) & MAX_PHY_REG_ADDRESS)) -#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ -#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ -#define IGP3_CAPABILITY PHY_REG(776, 19) /* Capability */ -#define IGP3_PM_CTRL PHY_REG(769, 20) /* Power Management Control */ - -#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 -#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 -#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 -#define IGP3_PM_CTRL_FORCE_PWR_DOWN 0x0020 +#define E1000_SHRAL_PCH_LPT(_i) (0x05408 + ((_i) * 8)) +#define E1000_SHRAH_PCH_LPT(_i) (0x0540C + ((_i) * 8)) + +#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_OFF1_ON2 << 4) | \ + (ID_LED_DEF1_DEF2)) + +#define E1000_ICH_NVM_SIG_WORD 0x13 +#define E1000_ICH_NVM_SIG_MASK 0xC000 +#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 +#define E1000_ICH_NVM_SIG_VALUE 0x80 + +#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 + +#define E1000_FEXTNVM_SW_CONFIG 1 +#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M */ + +#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000 +#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000 + +#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 + +#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 + +#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL + +#define E1000_ICH_RAR_ENTRIES 7 +#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ +#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ + +#define PHY_PAGE_SHIFT 5 +#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ + ((reg) & MAX_PHY_REG_ADDRESS)) +#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ +#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ + +#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 +#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 +#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 /* PHY Wakeup Registers and defines */ -#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0) -#define BM_WUC PHY_REG(BM_WUC_PAGE, 1) -#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2) -#define BM_WUS PHY_REG(BM_WUC_PAGE, 3) -#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2))) -#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2))) -#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2))) -#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2))) -#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1))) -#define BM_IPAV (BM_PHY_REG(BM_WUC_PAGE, 64)) -#define BM_IP4AT_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 82 + ((_i) * 2))) -#define BM_IP4AT_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 83 + ((_i) * 2))) - -#define BM_SHRAL_LOWER(_i) (BM_PHY_REG(BM_WUC_PAGE, 44 + ((_i) * 4))) -#define BM_SHRAL_UPPER(_i) (BM_PHY_REG(BM_WUC_PAGE, 45 + ((_i) * 4))) -#define BM_SHRAH_LOWER(_i) (BM_PHY_REG(BM_WUC_PAGE, 46 + ((_i) * 4))) -#define BM_SHRAH_UPPER(_i) (BM_PHY_REG(BM_WUC_PAGE, 47 + ((_i) * 4))) - -#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */ -#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */ -#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */ -#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */ -#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */ -#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */ -#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */ +#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17) +#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0) +#define BM_WUC PHY_REG(BM_WUC_PAGE, 1) +#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2) +#define BM_WUS PHY_REG(BM_WUC_PAGE, 3) +#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2))) +#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2))) +#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2))) +#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2))) +#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1))) + +#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */ +#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */ +#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */ +#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */ +#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */ +#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */ +#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */ #define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ -#define HV_MUX_DATA_CTRL PHY_REG(776, 16) -#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 -#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 -#define HV_SCC_UPPER PHY_REG(778, 16) /* Single Collision Count */ -#define HV_SCC_LOWER PHY_REG(778, 17) -#define HV_ECOL_UPPER PHY_REG(778, 18) /* Excessive Collision Count */ -#define HV_ECOL_LOWER PHY_REG(778, 19) -#define HV_MCC_UPPER PHY_REG(778, 20) /* Multiple Collision Count */ -#define HV_MCC_LOWER PHY_REG(778, 21) -#define HV_LATECOL_UPPER PHY_REG(778, 23) /* Late Collision Count */ -#define HV_LATECOL_LOWER PHY_REG(778, 24) -#define HV_COLC_UPPER PHY_REG(778, 25) /* Collision Count */ -#define HV_COLC_LOWER PHY_REG(778, 26) -#define HV_DC_UPPER PHY_REG(778, 27) /* Defer Count */ -#define HV_DC_LOWER PHY_REG(778, 28) -#define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */ -#define HV_TNCRS_LOWER PHY_REG(778, 30) - -#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ - -#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ -#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ +#define HV_MUX_DATA_CTRL PHY_REG(776, 16) +#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 +#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 +#define HV_STATS_PAGE 778 +#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */ +#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17) +#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */ +#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19) +#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */ +#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21) +#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */ +#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24) +#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */ +#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26) +#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */ +#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28) +#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */ +#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30) + +#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ + +#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ +#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ + +/* SMBus Control Phy Register */ +#define CV_SMB_CTRL PHY_REG(769, 23) +#define CV_SMB_CTRL_FORCE_SMBUS 0x0001 /* SMBus Address Phy Register */ -#define HV_SMB_ADDR PHY_REG(768, 26) -#define HV_SMB_ADDR_MASK 0x007F -#define HV_SMB_ADDR_PEC_EN 0x0200 -#define HV_SMB_ADDR_VALID 0x0080 +#define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_MASK 0x007F +#define HV_SMB_ADDR_PEC_EN 0x0200 +#define HV_SMB_ADDR_VALID 0x0080 +#define HV_SMB_ADDR_FREQ_MASK 0x1100 +#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8 +#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12 /* Strapping Option Register - RO */ -#define E1000_STRAP 0x0000C -#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 -#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 +#define E1000_STRAP 0x0000C +#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 +#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 +#define E1000_STRAP_SMT_FREQ_MASK 0x00003000 +#define E1000_STRAP_SMT_FREQ_SHIFT 12 /* OEM Bits Phy Register */ -#define HV_OEM_BITS PHY_REG(768, 25) -#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ -#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ -#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ - -#define LCD_CFG_PHY_ADDR_BIT 0x0020 /* Phy address bit from LCD Config word */ +#define HV_OEM_BITS PHY_REG(768, 25) +#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ +#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ /* KMRN Mode Control */ #define HV_KMRN_MODE_CTRL PHY_REG(769, 16) #define HV_KMRN_MDIO_SLOW 0x0400 +/* KMRN FIFO Control and Status */ +#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 + /* PHY Power Management Control */ #define HV_PM_CTRL PHY_REG(770, 17) +#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 -#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ +#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */ /* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 - -/* - * Additional interrupts need to be handled for ICH family: - * DSW = The FW changed the status of the DISSW bit in FWSM - * PHYINT = The LAN connected device generates an interrupt - * EPRST = Manageability reset event - */ -#define IMS_ICH_ENABLE_MASK (\ - E1000_IMS_DSW | \ - E1000_IMS_PHYINT | \ - E1000_IMS_EPRST) - -/* Additional interrupt register bit definitions */ -#define E1000_ICR_LSECPNC 0x00004000 /* PN threshold - client */ -#define E1000_IMS_LSECPNC E1000_ICR_LSECPNC /* PN threshold - client */ -#define E1000_ICS_LSECPNC E1000_ICR_LSECPNC /* PN threshold - client */ - -/* Security Processing bit Indication */ -#define E1000_RXDEXT_LINKSEC_STATUS_LSECH 0x01000000 -#define E1000_RXDEXT_LINKSEC_ERROR_BIT_MASK 0x60000000 -#define E1000_RXDEXT_LINKSEC_ERROR_NO_SA_MATCH 0x20000000 -#define E1000_RXDEXT_LINKSEC_ERROR_REPLAY_ERROR 0x40000000 -#define E1000_RXDEXT_LINKSEC_ERROR_BAD_SIG 0x60000000 +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_100_ENABLE 0x2000 +#define I82579_LPI_CTRL_1000_ENABLE 0x4000 +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 + +/* Extended Management Interface (EMI) Registers */ +#define I82579_EMI_ADDR 0x10 +#define I82579_EMI_DATA 0x11 +#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ +#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ +#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ +#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ +#define I82579_RX_CONFIG 0x3412 /* Receive configuration */ +#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ +#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ +#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ +#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ +#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ +#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */ +#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ +#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ +#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ +#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ + +#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ +#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ + +/* Intel Rapid Start Technology Support */ +#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) +#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 +#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28) +#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000 +#define I217_CGFREG PHY_REG(772, 29) +#define I217_CGFREG_ENABLE_MTA_RESET 0x0002 +#define I217_MEMPWR PHY_REG(772, 26) +#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010 /* Receive Address Initial CRC Calculation */ #define E1000_PCH_RAICC(_n) (0x05F50 + ((_n) * 4)) +/* Latency Tolerance Reporting */ +#define E1000_LTRV 0x000F8 +#define E1000_LTRV_VALUE_MASK 0x000003FF +#define E1000_LTRV_SCALE_MAX 5 +#define E1000_LTRV_SCALE_FACTOR 5 +#define E1000_LTRV_SCALE_SHIFT 10 +#define E1000_LTRV_SCALE_MASK 0x00001C00 +#define E1000_LTRV_REQ_SHIFT 15 +#define E1000_LTRV_NOSNOOP_SHIFT 16 +#define E1000_LTRV_SEND (1 << 30) + +/* Proprietary Latency Tolerance Reporting PCI Capability */ +#define E1000_PCI_LTR_CAP_LPT 0xA8 + +/* OBFF Control & Threshold Defines */ +#define E1000_SVCR_OFF_EN 0x00000001 +#define E1000_SVCR_OFF_MASKINT 0x00001000 +#define E1000_SVCR_OFF_TIMER_MASK 0xFFFF0000 +#define E1000_SVCR_OFF_TIMER_SHIFT 16 +#define E1000_SVT_OFF_HWM_MASK 0x0000001F + void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, - bool state); + bool state); void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw); -void e1000_disable_gig_wol_ich8lan(struct e1000_hw *hw); +void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw); +void e1000_resume_workarounds_pchlan(struct e1000_hw *hw); s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); -s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_config); -s32 e1000_hv_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw); s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable); -#endif +s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); +#endif /* _E1000_ICH8LAN_H_ */ |