diff options
Diffstat (limited to 'freebsd/sys/dev/e1000/e1000_82575.c')
| -rw-r--r-- | freebsd/sys/dev/e1000/e1000_82575.c | 177 |
1 files changed, 157 insertions, 20 deletions
diff --git a/freebsd/sys/dev/e1000/e1000_82575.c b/freebsd/sys/dev/e1000/e1000_82575.c index 0e06471f..83116e8e 100644 --- a/freebsd/sys/dev/e1000/e1000_82575.c +++ b/freebsd/sys/dev/e1000/e1000_82575.c @@ -2,7 +2,7 @@ /****************************************************************************** - Copyright (c) 2001-2014, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without @@ -280,6 +280,11 @@ static s32 e1000_init_phy_params_82575(struct e1000_hw *hw) if (ret_val) goto out; } + if (phy->id == M88E1543_E_PHY_ID) { + ret_val = e1000_initialize_M88E1543_phy(hw); + if (ret_val) + goto out; + } break; case IGP03E1000_E_PHY_ID: case IGP04E1000_E_PHY_ID: @@ -1053,7 +1058,7 @@ static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) u32 swmask = mask; u32 fwmask = mask << 16; s32 ret_val = E1000_SUCCESS; - s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ + s32 i = 0, timeout = 200; DEBUGFUNC("e1000_acquire_swfw_sync_82575"); @@ -1237,7 +1242,7 @@ static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) DEBUGFUNC("e1000_check_for_link_media_swap"); - /* Check the copper medium. */ + /* Check for copper. */ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); if (ret_val) return ret_val; @@ -1249,7 +1254,7 @@ static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) if (data & E1000_M88E1112_STATUS_LINK) port = E1000_MEDIA_PORT_COPPER; - /* Check the other medium. */ + /* Check for other. */ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1); if (ret_val) return ret_val; @@ -1258,11 +1263,6 @@ static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) if (ret_val) return ret_val; - /* reset page to 0 */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); - if (ret_val) - return ret_val; - if (data & E1000_M88E1112_STATUS_LINK) port = E1000_MEDIA_PORT_OTHER; @@ -1270,8 +1270,20 @@ static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) if (port && (hw->dev_spec._82575.media_port != port)) { hw->dev_spec._82575.media_port = port; hw->dev_spec._82575.media_changed = TRUE; + } + + if (port == E1000_MEDIA_PORT_COPPER) { + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + e1000_check_for_link_82575(hw); } else { - ret_val = e1000_check_for_link_82575(hw); + e1000_check_for_link_82575(hw); + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; } return E1000_SUCCESS; @@ -2128,7 +2140,7 @@ static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw) * e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable * @hw: pointer to the HW structure * - * After rx enable if managability is enabled then there is likely some + * After Rx enable, if manageability is enabled then there is likely some * bad data at the start of the fifo and possibly in the DMA fifo. This * function clears the fifos and flushes any packets that came in as rx was * being enabled. @@ -2138,7 +2150,13 @@ void e1000_rx_fifo_flush_82575(struct e1000_hw *hw) u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled; int i, ms_wait; - DEBUGFUNC("e1000_rx_fifo_workaround_82575"); + DEBUGFUNC("e1000_rx_fifo_flush_82575"); + + /* disable IPv6 options as per hardware errata */ + rfctl = E1000_READ_REG(hw, E1000_RFCTL); + rfctl |= E1000_RFCTL_IPV6_EX_DIS; + E1000_WRITE_REG(hw, E1000_RFCTL, rfctl); + if (hw->mac.type != e1000_82575 || !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN)) return; @@ -2166,7 +2184,6 @@ void e1000_rx_fifo_flush_82575(struct e1000_hw *hw) * incoming packets are rejected. Set enable and wait 2ms so that * any packet that was coming in as RCTL.EN was set is flushed */ - rfctl = E1000_READ_REG(hw, E1000_RFCTL); E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF); rlpml = E1000_READ_REG(hw, E1000_RLPML); @@ -2401,7 +2418,7 @@ out: * e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits * @hw: pointer to the HW structure * - * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on + * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on * the values found in the EEPROM. This addresses an issue in which these * bits are not restored from EEPROM after reset. **/ @@ -2808,7 +2825,7 @@ s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data) * e1000_initialize_M88E1512_phy - Initialize M88E1512 PHY * @hw: pointer to the HW structure * - * Initialize Marverl 1512 to work correctly with Avoton. + * Initialize Marvell 1512 to work correctly with Avoton. **/ s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw) { @@ -2894,13 +2911,114 @@ out: } /** + * e1000_initialize_M88E1543_phy - Initialize M88E1543 PHY + * @hw: pointer to the HW structure + * + * Initialize Marvell 1543 to work correctly with Avoton. + **/ +s32 e1000_initialize_M88E1543_phy(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_initialize_M88E1543_phy"); + + /* Check if this is correct PHY. */ + if (phy->id != M88E1543_E_PHY_ID) + goto out; + + /* Switch to PHY page 0xFF. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159); + if (ret_val) + goto out; + + /* Switch to PHY page 0xFB. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0xC00D); + if (ret_val) + goto out; + + /* Switch to PHY page 0x12. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12); + if (ret_val) + goto out; + + /* Change mode to SGMII-to-Copper */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001); + if (ret_val) + goto out; + + /* Switch to PHY page 1. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1); + if (ret_val) + goto out; + + /* Change mode to 1000BASE-X/SGMII and autoneg enable; reset */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + + msec_delay(1000); +out: + return ret_val; +} + +/** * e1000_set_eee_i350 - Enable/disable EEE support * @hw: pointer to the HW structure + * @adv1g: boolean flag enabling 1G EEE advertisement + * @adv100m: boolean flag enabling 100M EEE advertisement * * Enable/disable EEE based on setting in dev_spec structure. * **/ -s32 e1000_set_eee_i350(struct e1000_hw *hw) +s32 e1000_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M) { u32 ipcnfg, eeer; @@ -2916,7 +3034,16 @@ s32 e1000_set_eee_i350(struct e1000_hw *hw) if (!(hw->dev_spec._82575.eee_disable)) { u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU); - ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); + if (adv100M) + ipcnfg |= E1000_IPCNFG_EEE_100M_AN; + else + ipcnfg &= ~E1000_IPCNFG_EEE_100M_AN; + + if (adv1G) + ipcnfg |= E1000_IPCNFG_EEE_1G_AN; + else + ipcnfg &= ~E1000_IPCNFG_EEE_1G_AN; + eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | E1000_EEER_LPI_FC); @@ -2940,11 +3067,13 @@ out: /** * e1000_set_eee_i354 - Enable/disable EEE support * @hw: pointer to the HW structure + * @adv1g: boolean flag enabling 1G EEE advertisement + * @adv100m: boolean flag enabling 100M EEE advertisement * * Enable/disable EEE legacy mode based on setting in dev_spec structure. * **/ -s32 e1000_set_eee_i354(struct e1000_hw *hw) +s32 e1000_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val = E1000_SUCCESS; @@ -2986,8 +3115,16 @@ s32 e1000_set_eee_i354(struct e1000_hw *hw) if (ret_val) goto out; - phy_data |= E1000_EEE_ADV_100_SUPPORTED | - E1000_EEE_ADV_1000_SUPPORTED; + if (adv100M) + phy_data |= E1000_EEE_ADV_100_SUPPORTED; + else + phy_data &= ~E1000_EEE_ADV_100_SUPPORTED; + + if (adv1G) + phy_data |= E1000_EEE_ADV_1000_SUPPORTED; + else + phy_data &= ~E1000_EEE_ADV_1000_SUPPORTED; + ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, E1000_EEE_ADV_DEV_I354, phy_data); |