diff options
Diffstat (limited to 'README.md')
-rw-r--r-- | README.md | 294 |
1 files changed, 0 insertions, 294 deletions
diff --git a/README.md b/README.md deleted file mode 100644 index 7794b12b..00000000 --- a/README.md +++ /dev/null @@ -1,294 +0,0 @@ -RTEMS LibBSD -============ - -Welcome to building LibBSD for RTEMS using Waf. This package is a library -containing various parts of the FreeBSD kernel ported to RTEMS. The library -replaces the networking port of FreeBSD in the RTEMS kernel sources. This -package is designed to be updated from the FreeBSD kernel sources and contains -more than just the networking code. - -To build this package you need a current RTEMS tool set for your architecture, -and a recent RTEMS kernel for your BSP configured with networking disabled -built and installed. If you already have this you can skip to step 3 of the -build procedure. - -Building and Installing LibBSD ------------------------------- - -The following instructions show you how to build and install RTEMS Tools and -RTEMS kernel for your BSP in separate paths. Using separate paths for the tools -and BSPs lets you manage what you have installed. If you are happy with a -single path you can use the same path in each stage. - -The Waf build support for RTEMS requires you provide your BSP name as an -architecture and BSP pair. You must provide both or Waf will generate an error -message during the configure phase. - -We will build an Xilinx Zynq QEMU BSP using the name -*arm/xilinx_zynq_a9_qemu*. You can copy and paste the shell commands below to -do this. The individual steps are explained afterwards. - -``` -sandbox="$PWD/sandbox" -mkdir sandbox -cd "$sandbox" -git clone git://git.rtems.org/rtems-source-builder.git -git clone git://git.rtems.org/rtems.git -git clone git://git.rtems.org/rtems-libbsd.git -cd "$sandbox" -cd rtems-source-builder/rtems -../source-builder/sb-set-builder --prefix="$sandbox/rtems/5" 5/rtems-arm -cd "$sandbox" -cd rtems -PATH="$sandbox/rtems/5/bin:$PATH" ./bootstrap -cd "$sandbox" -mkdir b-xilinx_zynq_a9_qemu -cd b-xilinx_zynq_a9_qemu -PATH="$sandbox/rtems/5/bin:$PATH" "$sandbox/rtems/configure" \ - --target=arm-rtems5 --prefix="$sandbox/rtems/5" \ - --disable-networking --enable-rtemsbsp=xilinx_zynq_a9_qemu -PATH="$sandbox/rtems/5/bin:$PATH" make -PATH="$sandbox/rtems/5/bin:$PATH" make install -cd "$sandbox" -cd rtems-libbsd -git submodule init -git submodule update rtems_waf -./waf configure --prefix="$sandbox/rtems/5" \ - --rtems-bsps=arm/xilinx_zynq_a9_qemu \ - --buildset=buildset/default.ini -./waf -./waf install -qemu-system-arm -no-reboot -serial null -serial mon:stdio -net none \ - -nographic -M xilinx-zynq-a9 -m 256M \ - -kernel build/arm-rtems5-xilinx_zynq_a9_qemu-default/selectpollkqueue01.exe -``` - -1. Create a sandbox directory: - -``` -$ sandbox="$PWD/sandbox" -$ mkdir sandbox -``` - -2. Clone the repositories: - -``` -$ cd "$sandbox" -$ git clone git://git.rtems.org/rtems-source-builder.git -$ git clone git://git.rtems.org/rtems.git -$ git clone git://git.rtems.org/rtems-libbsd.git -``` - -3. Build and install the tools: - -``` -$ cd "$sandbox" -$ cd rtems-source-builder/rtems -$ ../source-builder/sb-set-builder --prefix="$sandbox/rtems/5" 5/rtems-arm -``` - -4. Bootstrap the RTEMS sources: - -``` -$ cd "$sandbox" -$ cd rtems -$ PATH="$sandbox/rtems/5/bin:$PATH" ./bootstrap -``` - -5. Build and install the RTEMS Board Support Packages (BSP) you want to use: - -``` -$ cd "$sandbox" -$ mkdir b-xilinx_zynq_a9_qemu -$ cd b-xilinx_zynq_a9_qemu -$ PATH="$sandbox/rtems/5/bin:$PATH" "$sandbox/rtems/configure" \ - --target=arm-rtems5 --prefix="$sandbox/rtems/5" \ - --disable-networking --enable-rtemsbsp=xilinx_zynq_a9_qemu -$ PATH="$sandbox/rtems/5/bin:$PATH" make -$ PATH="$sandbox/rtems/5/bin:$PATH" make install -``` - -6. Populate the rtems_waf git submodule. Note, make sure you specify - 'rtems_waf' or the FreeBSD kernel source will be cloned: - -``` -$ cd "$sandbox" -$ cd rtems-libbsd -$ git submodule init -$ git submodule update rtems_waf -``` - -7. Run Waf's configure with your specific settings. In this case the path to - the tools and RTEMS are provided on the command line and so do not need to - be in your path or environment [1]. You can use - '--rtems-archs=arm,sparc,i386' or - '--rtems-bsps=arm/xilinx_zynq_a9_qemu,sparc/sis,i386/pc586' to build for - more than BSP at a time. Note, you must provide the architecture and BSP as - a pair. Providing just the BSP name will fail. This call also explicitly - provides a buildset via the '--buildset=buildset/default.ini' option. If no - buildset is provided the default one (which is the same as the one provided - explicitly here) will be used. You can also provide multiple buildsets as a - coma separated list or via multiple '--buildset=x' options. - -``` -$ cd "$sandbox" -$ cd rtems-libbsd -$ ./waf configure --prefix="$sandbox/rtems/5" \ - --rtems-bsps=arm/xilinx_zynq_a9_qemu \ - --buildset=buildset/default.ini -``` - -8. Build and install. The LibBSD package will be installed into the prefix - provided to configure: - -``` -$ cd "$sandbox" -$ cd rtems-libbsd -$ ./waf -$ ./waf install -``` - -9. Run the tests on QEMU, for example: - -``` -$ qemu-system-arm -no-reboot -serial null -serial mon:stdio -net none \ -$ -nographic -M xilinx-zynq-a9 -m 256M \ -$ -kernel build/arm-rtems5-xilinx_zynq_a9_qemu-default/selectpollkqueue01.exe -``` - -[1] It is good practice to keep your environment as empty as possible. Setting - paths to tools or specific values to configure or control a build is - dangerous because settings can leak between different builds and change - what you expect a build to do. The Waf tool used here lets you specify on - the command line the tools and RTEMS paths and this is embedded in Waf's - configuration information. If you have a few source trees working at any - one time with different tool sets or configurations you can easly move - between them safe in the knowledge that one build will not infect another. - -Branches --------- - -* master - branch intended for the RTEMS master which tracks the FreeBSD master - branch. This branch must be used for libbsd development. Back ports to the - 6-freebsd-12 are allowed. - -* 6-freebsd-12 - branch intended for RTEMS 6 which tracks the FreeBSD stable/12 - branch. This branch is maintained and regular updates from FreeBSD are - planned. It is recommended for production systems. - -* 5-freebsd-12 - branch belongs to the RTEMS 5 release. It is based on FreeBSD - stable/12 branch. It is recommended for production systems that use RTEMS 5. - -* 5 - branch belongs to the RTEMS 5 release. It is based on a FreeBSD - development version. - -* freebsd-9.3 - branch for some RTEMS version with a FreeBSD 9.3 baseline. - This branch is unmaintained. It is recommended to update to RTEMS 5 or 6. - -* 4.11 - branch for the RTEMS 4.11 release series. This branch is - unmaintained. It is recommended to update to RTEMS 5 or 6. - -Updating RTEMS Waf Support --------------------------- - -If you have a working libbsd repository and new changes to the `rtems_waf` -submodule has been made, you will need update. A `git status` will indicate -there are new commits with: - -``` -$ git status - [ snip output ] - modified: rtems_waf (new commits) - [ snip output ] -``` - -To update: - -``` -$ git submodule update rtems_waf -``` - -Please make sure you use the exact command or you might find you are cloning -the whole of the FreeBSD source tree. If that happens simply git ^C and try -again. - -FreeBSD Kernel Options ----------------------- - -You can set FreeBSD kernel options during build configuration with the ---freebsd-option=a,b,c,... configuration command option. This is an advanced -option and should only be used if you are familiar with the internals of the -FreeBSD kernel and what these options do. Each of the comma separated options -is converted to uppercase and passed as a compiler command line define (-D). - -The options are listed in: - -https://github.com/freebsd/freebsd/blob/master/sys/conf/NOTES - -An example to turn on a verbose kernel boot, verbose sysinit and bus debugging -configure with: - -``` ---freebsd-options=bootverbose,verbose_sysinit,bus_debug -``` - -To enable kernel internal consistency checking use: - -``` ---freebsd-options=invariants,invariant_support -``` - -Qemu and Networking -------------------- - -You can use the Qemu simulator to run a LibBSD based application and connect it -to a virtual network on your host. You have to create a TAP virtual Ethernet -interface for this: - -``` -sudo tunctl -p -t qtap -u $(whoami) -sudo ip link set dev qtap up -sudo ip addr add 169.254.1.1/16 dev qtap -``` - -You can show the interface state with the following command: - -``` -$ ip addr show qtap -27: qtap: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 - link/ether 8e:50:a2:fb:e1:3b brd ff:ff:ff:ff:ff:ff - inet 169.254.1.1/16 scope global qtap - valid_lft forever preferred_lft forever -``` - -You may have to assign the interface to a firewall zone. - -The Qemu command line varies by board support package, here is an example for -the arm/xilinx_zynq_a9_qemu BSP: - -``` -qemu-system-arm -serial null -serial mon:stdio -nographic \ - -M xilinx-zynq-a9 -m 256M \ - -net tap,ifname=qtap,script=no,downscript=no \ - -net nic,model=cadence_gem,macaddr=0e:b0:ba:5e:ba:12 \ - -kernel build/arm-rtems5-xilinx_zynq_a9_qemu-default/media01.exe -``` - -After some seconds it will acquire a IPv4 link-local address, e.g. - -``` -info: cgem0: probing for an IPv4LL address -debug: cgem0: checking for 169.254.159.156 -``` - -You can connect to the target via telnet for example: - -``` -$ telnet 169.254.159.156 -Trying 169.254.159.156... -Connected to 169.254.159.156. -Escape character is '^]'. - -RTEMS Shell on /dev/pty4. Use 'help' to list commands. -TLNT [/] # -``` |