diff options
author | Sebastian Huber <sebastian.huber@embedded-brains.de> | 2022-05-19 11:41:16 +0200 |
---|---|---|
committer | Sebastian Huber <sebastian.huber@embedded-brains.de> | 2022-05-23 16:26:30 +0200 |
commit | 384600c11fe65dbb5a977508fa5d226135897914 (patch) | |
tree | 2745cde6186a0a0ece18302fc612295e2a1bd47b /libbsd.txt | |
parent | libbsd.txt: Move BSP related content (diff) | |
download | rtems-libbsd-384600c11fe65dbb5a977508fa5d226135897914.tar.bz2 |
libbsd.txt: Remove installation overview
This is already covered by README.md
Diffstat (limited to 'libbsd.txt')
-rw-r--r-- | libbsd.txt | 50 |
1 files changed, 0 insertions, 50 deletions
@@ -7,56 +7,6 @@ RTEMS BSD Library Guide == Getting Started - -You need a tool chain for RTEMS based on the latest RTEMS Source Builder (RSB). - -=== Installation Overview === - -. You must configure your BSP with the +--disable-networking+ option to disable -the old network stack. Make sure no header files of the old network stack are -installed. - -. Clone the Git repository +git clone git://git.rtems.org/rtems-libbsd.git+. -. Change into the RTEMS BSD library root directory. -. If you want to run tests with a custom IP configuration instead of the default - one you can use an adjusted `config.inc` configuration file. -. Run +waf configure ...+. -. Run +waf+. -. Run +waf install+. - -Refer to the README.waf for Waf building instructions. - -Make sure the submodules have been initialised and are updated. If a 'git -status' says `rtems_waf` need updating run the submodule update command: - - $ git submodule sync - $ git submodule rtems_waf update - -=== Board Support Package Configuration and Build === - -You need to configure RTEMS for the desired BSP and install it. The BSP must -be configured with a disabled network stack. The BSD library containing the -new network stack is a separate package. Using a BSP installation containing -the old network stack may lead to confusion and unpredictable results. - -The following script is used to build the `arm/xilinx_zynq_a9_qemu` BSP for -our internal testing purposes: - -------------------------------------------------------------------------------- -#!/bin/sh - -cd ${HOME}/sandbox -rm -rf b-xilinx_zynq_a9_qemu -mkdir b-xilinx_zynq_a9_qemu -cd b-xilinx_zynq_a9_qemu -${HOME}/git-rtems/configure \ - --prefix=${HOME}/sandbox/install \ - --target=arm-rtems5 \ - --enable-rtemsbsp=xilinx_zynq_a9_qemu \ - --disable-networking && \ - make && \ - make install -------------------------------------------------------------------------------- === BSD Library Configuration and Build === The build system based on the Waf build system. To build with Waf please refer |