Move files to match FreeBSD layout

1 files changed, 337 insertions, 0 deletions

diff --git a/freebsd/sys/net/if_atm.h b/freebsd/sys/net/if_atm.h
new file mode 100644
index 00000000..e8f69da0
--- /dev/null
+++ b/freebsd/sys/net/if_atm.h
@@ -0,0 +1,337 @@
+/*      $NetBSD: if_atm.h,v 1.7 1996/11/09 23:02:27 chuck Exp $       */
+/* $FreeBSD$ */
+
+/*-
+ *
+ * Copyright (c) 1996 Charles D. Cranor and Washington University.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *      This product includes software developed by Charles D. Cranor and
+ *	Washington University.
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * net/if_atm.h
+ */
+
+/*
+ * Classification of ATM cards.
+ */
+#define	ATM_DEVICE_UNKNOWN	0
+#define	ATM_DEVICE_PCA200E	1	/* Fore/Marconi PCA200-E */
+#define	ATM_DEVICE_HE155	2	/* Fore/Marconi HE155 */
+#define	ATM_DEVICE_HE622	3	/* Fore/Marconi HE622 */
+#define	ATM_DEVICE_ENI155P	4	/* Efficient networks 155p */
+#define	ATM_DEVICE_ADP155P	5	/* Adaptec 155p */
+#define	ATM_DEVICE_FORELE25	6	/* ForeRunnerLE 25 */
+#define	ATM_DEVICE_FORELE155	7	/* ForeRunnerLE 155 */
+#define	ATM_DEVICE_NICSTAR25	8	/* other 77211 25.6MBit */
+#define	ATM_DEVICE_NICSTAR155	9	/* other 77211 155MBit */
+#define	ATM_DEVICE_IDTABR25	10	/* 77252 based card 25MBit */
+#define	ATM_DEVICE_IDTABR155	11	/* 77252 based card 155MBit */
+#define	ATM_DEVICE_PROATM25	12	/* 77252 based ProSum card 25MBit */
+#define	ATM_DEVICE_PROATM155	13	/* 77252 based ProSum card 155MBit */
+#define	ATM_DEVICE_VIRTUAL	14	/* virtual ATM device (netgraph) */
+
+/* map to strings and vendors */
+#define	ATM_DEVICE_NAMES						\
+	{ "Unknown",		"Unknown" },				\
+	{ "PCA200-E",		"Fore/Marconi" },			\
+	{ "HE155",		"Fore/Marconi" },			\
+	{ "HE622",		"Fore/Marconi" },			\
+	{ "ENI155p",		"Efficient Networks" },			\
+	{ "ADP155p",		"Adaptec" },				\
+	{ "ForeRunnerLE25",	"Fore/Marconi" },			\
+	{ "ForeRunnerLE155",	"Fore/Marconi" },			\
+	{ "IDT77211/25",	"IDT" },				\
+	{ "IDT77211/155",	"IDT" },				\
+	{ "IDT77252/25",	"IDT" },				\
+	{ "IDT77252/155",	"IDT" },				\
+	{ "ProATM/25",		"ProSum" },				\
+	{ "ProATM/155",		"ProSum" },				\
+	{ "Virtual",		"NetGraph" },
+
+/*
+ * This is the common link layer MIB for all ATM interfaces. Much of the
+ * information here is needed for ILMI. This will be augmented by statistics
+ * at some point.
+ */
+struct ifatm_mib {
+	/* configuration data */
+	uint8_t		device;		/* type of card */
+	u_char		esi[6];		/* end system identifier (MAC) */
+	uint32_t	serial;		/* card serial number */
+	uint32_t	hw_version;	/* card version */
+	uint32_t	sw_version;	/* firmware version (if any) */
+	uint32_t	pcr;		/* supported peak cell rate */
+	uint32_t	media;		/* physical media */
+	uint8_t		vpi_bits;	/* number of used bits in VPI field */
+	uint8_t		vci_bits;	/* number of used bits in VCI field */
+	uint16_t	max_vpcs;	/* maximum number of VPCs */
+	uint32_t	max_vccs;	/* maximum number of VCCs */
+};
+
+/*
+ * Traffic parameters for ATM connections. This contains all parameters
+ * to accomodate UBR, UBR+MCR, CBR, VBR and ABR connections.
+ *
+ * Keep in sync with ng_atm.h
+ */
+struct atmio_tparam {
+	uint32_t	pcr;	/* 24bit: Peak Cell Rate */
+	uint32_t	scr;	/* 24bit: VBR Sustainable Cell Rate */
+	uint32_t	mbs;	/* 24bit: VBR Maximum burst size */
+	uint32_t	mcr;	/* 24bit: ABR/VBR/UBR+MCR MCR */
+	uint32_t	icr;	/* 24bit: ABR ICR */
+	uint32_t	tbe;	/* 24bit: ABR TBE (1...2^24-1) */
+	uint8_t		nrm;	/*  3bit: ABR Nrm */
+	uint8_t		trm;	/*  3bit: ABR Trm */
+	uint16_t	adtf;	/* 10bit: ABR ADTF */
+	uint8_t		rif;	/*  4bit: ABR RIF */
+	uint8_t		rdf;	/*  4bit: ABR RDF */
+	uint8_t		cdf;	/*  3bit: ABR CDF */
+};
+
+/*
+ * VCC parameters
+ *
+ * Keep in sync with ng_atm.h
+ */
+struct atmio_vcc {
+	uint16_t	flags;		/* VCC flags */
+	uint16_t	vpi;
+	uint16_t	vci;
+	uint16_t	rmtu;		/* maximum receive PDU */
+	uint16_t	tmtu;		/* maximum transmit PDU */
+	uint8_t		aal;		/* aal type */
+	uint8_t		traffic;	/* traffic type */
+	struct atmio_tparam tparam;	/* traffic parameters */
+};
+
+/* VCC flags */
+#define	ATMIO_FLAG_LLCSNAP	0x0002	/* same as ATM_PH_LLCSNAP */
+#define	ATMIO_FLAG_NG		0x0010	/* owned by netgraph */
+#define	ATMIO_FLAG_HARP		0x0020	/* owned by HARP */
+#define	ATMIO_FLAG_NORX		0x0100	/* not receiving on this VCC */
+#define	ATMIO_FLAG_NOTX		0x0200	/* not transmitting on this VCC */
+#define	ATMIO_FLAG_PVC		0x0400	/* this is a PVC */
+#define	ATMIO_FLAG_ASYNC	0x0800	/* async open/close */
+#define	ATMIO_FLAGS	"\020\2LLCSNAP\5NG\6HARP\11NORX\12NOTX\13PVC\14ASYNC"
+
+#define	ATMIO_AAL_0		0	/* pure cells */
+#define	ATMIO_AAL_34		4	/* AAL3 and 4 */
+#define	ATMIO_AAL_5		5	/* AAL5 */
+#define	ATMIO_AAL_RAW		10	/* whatever the card does */
+
+#define	ATMIO_TRAFFIC_UBR	0
+#define	ATMIO_TRAFFIC_CBR	1
+#define	ATMIO_TRAFFIC_ABR	2
+#define	ATMIO_TRAFFIC_VBR	3
+
+/*
+ * VCC table
+ *
+ * Keep in sync with ng_atm.h
+ */
+struct atmio_vcctable {
+	uint32_t	count;		/* number of vccs */
+	struct atmio_vcc vccs[0];	/* array of VCCs */
+};
+
+/*
+ * Peak cell rates for various physical media. Note, that there are
+ * different opinions on what the correct values are.
+ */
+#define	ATM_RATE_25_6M		59259
+#define	ATM_RATE_155M		353208
+#define	ATM_RATE_622M		1412830
+#define	ATM_RATE_2_4G		5651320
+
+#ifdef _KERNEL
+/*
+ * Common fields for all ATM interfaces. Each driver's softc must start with
+ * this structure.
+ */
+struct ifatm {
+	struct ifnet	*ifp;
+	struct ifatm_mib mib;		/* exported data */
+	void		*phy;		/* usually SUNI */
+	void		*ngpriv;	/* netgraph link */
+};
+#define	IFP2IFATM(ifp)	((struct ifatm *)(ifp)->if_l2com)
+#endif
+
+/*
+ * Keep structures in sync with ng_atm.h
+ *
+ * These are used by netgraph/harp to call the driver
+ * NATM uses the atm_pseudoioctl instead.
+ */
+struct atmio_openvcc {
+	void		*rxhand;	/* handle argument */
+	struct atmio_vcc param;		/* parameters */
+};
+
+struct atmio_closevcc {
+	uint16_t	vpi;
+	uint16_t	vci;
+};
+
+#if defined(__NetBSD__) || defined(__OpenBSD__) || defined(__bsdi__)
+#define	RTALLOC1(A,B)		rtalloc1((A),(B))
+#elif defined(__FreeBSD__)
+#define	RTALLOC1(A,B)		rtalloc1((A),(B),0UL)
+#endif
+
+/*
+ * pseudo header for packet transmission
+ */
+struct atm_pseudohdr {
+	uint8_t		atm_ph[4];	/* flags+VPI+VCI1(msb)+VCI2(lsb) */
+};
+
+#define	ATM_PH_FLAGS(X)	((X)->atm_ph[0])
+#define	ATM_PH_VPI(X)	((X)->atm_ph[1])
+#define	ATM_PH_VCI(X)	((((X)->atm_ph[2]) << 8) | ((X)->atm_ph[3]))
+#define	ATM_PH_SETVCI(X,V) { \
+	(X)->atm_ph[2] = ((V) >> 8) & 0xff; \
+	(X)->atm_ph[3] = ((V) & 0xff); \
+}
+
+/* use AAL5? (0 == aal0) */
+#define	ATM_PH_AAL5	0x01
+/* use the LLC SNAP encoding (iff aal5) */
+#define	ATM_PH_LLCSNAP ATMIO_FLAG_LLCSNAP
+
+#define	ATM_PH_DRIVER7  0x40	/* reserve for driver's use */
+#define	ATM_PH_DRIVER8  0x80	/* reserve for driver's use */
+
+#define	ATMMTU		9180	/* ATM MTU size for IP */
+				/* XXX: could be 9188 with LLC/SNAP according
+					to comer */
+
+#define	SIOCATMGETVCCS	_IOW('a', 125, struct atmio_vcctable)
+#define	SIOCATMOPENVCC	_IOR('a', 126, struct atmio_openvcc)
+#define	SIOCATMCLOSEVCC _IOR('a', 127, struct atmio_closevcc)
+
+#define	SIOCATMGVCCS	_IOWR('i', 230, struct ifreq)
+
+/*
+ * XXX forget all the garbage in if_llc.h and do it the easy way
+ */
+#define	ATMLLC_HDR "\252\252\3\0\0\0"
+struct atmllc {
+	uint8_t		llchdr[6];	/* aa.aa.03.00.00.00 */
+	uint8_t		type[2];	/* "ethernet" type */
+};
+
+/* ATM_LLC macros: note type code in host byte order */
+#define	ATM_LLC_TYPE(X) (((X)->type[0] << 8) | ((X)->type[1]))
+#define	ATM_LLC_SETTYPE(X, V) do {		\
+	(X)->type[0] = ((V) >> 8) & 0xff;	\
+	(X)->type[1] = ((V) & 0xff);		\
+    } while (0)
+
+/*
+ * Events that are emitted by the driver. Currently the only consumer
+ * of this is the netgraph node.
+ */
+#define	ATMEV_FLOW_CONTROL	0x0001	/* channel busy state changed */
+#define	ATMEV_IFSTATE_CHANGED	0x0002	/* up/down or carrier */
+#define	ATMEV_VCC_CHANGED	0x0003	/* PVC deleted/create */
+#define	ATMEV_ACR_CHANGED	0x0004	/* ABR ACR has changed */
+
+struct atmev_flow_control {
+	uint16_t	vpi;		/* channel that is changed */
+	uint16_t	vci;
+	u_int		busy : 1;	/* != 0 -> ATM layer busy */
+};
+
+struct atmev_ifstate_changed {
+	u_int		running : 1;	/* interface is running now */
+	u_int		carrier : 1;	/* carrier detected (or not) */
+};
+
+struct atmev_vcc_changed {
+	uint16_t	vpi;		/* channel that is changed */
+	uint16_t	vci;
+	u_int		up : 1;		/* 1 - created, 0 - deleted */
+};
+
+struct atmev_acr_changed {
+	uint16_t	vpi;		/* channel that is changed */
+	uint16_t	vci;
+	uint32_t	acr;		/* new ACR */
+};
+
+#ifdef _KERNEL
+void	atm_ifattach(struct ifnet *);
+void	atm_ifdetach(struct ifnet *);
+void	atm_input(struct ifnet *, struct atm_pseudohdr *,
+	    struct mbuf *, void *);
+int	atm_output(struct ifnet *, struct mbuf *, struct sockaddr *, 
+	    struct route *);
+struct atmio_vcctable *atm_getvccs(struct atmio_vcc **, u_int, u_int,
+	    struct mtx *, int);
+
+void	atm_event(struct ifnet *, u_int, void *);
+
+#define	ATMEV_SEND_FLOW_CONTROL(ATMIF, VPI, VCI, BUSY)			\
+	do {								\
+		struct atmev_flow_control _arg;				\
+		_arg.vpi = (VPI);					\
+		_arg.vci = (VCI);					\
+		_arg.busy = (BUSY);					\
+		atm_event((ATMIF)->ifp, ATMEV_FLOW_CONTROL, &_arg);	\
+	} while (0)
+
+#define	ATMEV_SEND_VCC_CHANGED(ATMIF, VPI, VCI, UP)			\
+	do {								\
+		struct atmev_vcc_changed _arg;				\
+		_arg.vpi = (VPI);					\
+		_arg.vci = (VCI);					\
+		_arg.up = (UP);						\
+		atm_event((ATMIF)->ifp, ATMEV_VCC_CHANGED, &_arg);	\
+	} while (0)
+
+#define	ATMEV_SEND_IFSTATE_CHANGED(ATMIF, CARRIER)			\
+	do {								\
+		struct atmev_ifstate_changed _arg;			\
+		_arg.running = (((ATMIF)->ifp->if_drv_flags &		\
+		    IFF_DRV_RUNNING) != 0);				\
+		_arg.carrier = ((CARRIER) != 0);			\
+		atm_event((ATMIF)->ifp, ATMEV_IFSTATE_CHANGED, &_arg); \
+	} while (0)
+
+#define	ATMEV_SEND_ACR_CHANGED(ATMIF, VPI, VCI, ACR)			\
+	do {								\
+		struct atmev_acr_changed _arg;				\
+		_arg.vpi = (VPI);					\
+		_arg.vci = (VCI);					\
+		_arg.acr= (ACR);					\
+		atm_event((ATMIF)->ifp, ATMEV_ACR_CHANGED, &_arg);	\
+	} while (0)
+#endif