#include <machine/rtems-bsd-kernel-space.h>
/*-
* SPDX-License-Identifier: BSD-4-Clause
*
* Copyright (c) 2010
* Ben Gray <ben.r.gray@gmail.com>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Ben Gray.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* SCM - System Control Module
*
* Hopefully in the end this module will contain a bunch of utility functions
* for configuring and querying the general system control registers, but for
* now it only does pin(pad) multiplexing.
*
* This is different from the GPIO module in that it is used to configure the
* pins between modules not just GPIO input/output.
*
* This file contains the generic top level driver, however it relies on chip
* specific settings and therefore expects an array of ti_scm_padconf structs
* call ti_padconf_devmap to be located somewhere in the kernel.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <rtems/bsd/sys/resource.h>
#include <sys/rman.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/fdt/fdt_pinctrl.h>
#include "ti_scm.h"
#include "ti_cpuid.h"
static struct resource_spec ti_scm_res_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE }, /* Control memory window */
{ -1, 0 }
};
static struct ti_scm_softc *ti_scm_sc;
#define ti_scm_read_4(sc, reg) \
bus_space_read_4((sc)->sc_bst, (sc)->sc_bsh, (reg))
#define ti_scm_write_4(sc, reg, val) \
bus_space_write_4((sc)->sc_bst, (sc)->sc_bsh, (reg), (val))
/*
* Device part of OMAP SCM driver
*/
static int
ti_scm_probe(device_t dev)
{
if (!ti_soc_is_supported())
return (ENXIO);
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "syscon"))
return (ENXIO);
if (ti_scm_sc) {
return (EEXIST);
}
device_set_desc(dev, "TI Control Module");
return (BUS_PROBE_DEFAULT);
}
/**
* ti_scm_attach - attaches the timer to the simplebus
* @dev: new device
*
* Reserves memory and interrupt resources, stores the softc structure
* globally and registers both the timecount and eventtimer objects.
*
* RETURNS
* Zero on success or ENXIO if an error occuried.
*/
static int
ti_scm_attach(device_t dev)
{
struct ti_scm_softc *sc = device_get_softc(dev);
sc->sc_dev = dev;
if (bus_alloc_resources(dev, ti_scm_res_spec, sc->sc_res)) {
device_printf(dev, "could not allocate resources\n");
return (ENXIO);
}
/* Global timer interface */
sc->sc_bst = rman_get_bustag(sc->sc_res[0]);
sc->sc_bsh = rman_get_bushandle(sc->sc_res[0]);
ti_scm_sc = sc;
/* Attach platform extensions, if any. */
bus_generic_probe(dev);
return (bus_generic_attach(dev));
}
int
ti_scm_reg_read_4(uint32_t reg, uint32_t *val)
{
if (!ti_scm_sc)
return (ENXIO);
*val = ti_scm_read_4(ti_scm_sc, reg);
return (0);
}
int
ti_scm_reg_write_4(uint32_t reg, uint32_t val)
{
if (!ti_scm_sc)
return (ENXIO);
ti_scm_write_4(ti_scm_sc, reg, val);
return (0);
}
static device_method_t ti_scm_methods[] = {
DEVMETHOD(device_probe, ti_scm_probe),
DEVMETHOD(device_attach, ti_scm_attach),
{ 0, 0 }
};
static driver_t ti_scm_driver = {
"ti_scm",
ti_scm_methods,
sizeof(struct ti_scm_softc),
};
static devclass_t ti_scm_devclass;
EARLY_DRIVER_MODULE(ti_scm, simplebus, ti_scm_driver, ti_scm_devclass, 0, 0,
BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE);
