diff options
Diffstat (limited to 'user/start/windows.rst')
| -rw-r--r-- | user/start/windows.rst | 477 |
1 files changed, 0 insertions, 477 deletions
diff --git a/user/start/windows.rst b/user/start/windows.rst deleted file mode 100644 index 9e41276..0000000 --- a/user/start/windows.rst +++ /dev/null @@ -1,477 +0,0 @@ -.. comment SPDX-License-Identifier: CC-BY-SA-4.0 - -.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org> -.. comment: All rights reserved. - -.. _microsoft-windows-installation: - -Microsoft Windows ------------------ -.. index:: Microsoft Windows Installation - -This section details how you create an RTEMS development environment on -Windows. The installation documented here is on `Windows 7 64bit -Professional`. Building on `Windows 10` has been reported as working. - -Please see :ref:`microsoft-windows` before continuing. - -.. note:: - - If the RSB reports ``error: no hosts defaults found; please add`` you have - probably opened an MSYS2 32bit Shell. Close all 32bit Shell windows and open - the MSYS2 64bit Shell. - -RTEMS Tools -~~~~~~~~~~~ - -Create a workspace for RTEMS using the following shell command: - -.. sidebar:: *Creating Tool Archives* - - Add ``--bset-tar-file`` to the ``sb-set-builder`` command line to create - tar files of the built package set. - -.. code-block:: shell - - ~ - $ mkdir -p /c/opt/rtems - -The ``/c`` path is an internal MSYS2 mount point of the ``C:`` drive. The -command creates the RTEMS work space on the ``C:`` drive. If you wish to use -another drive please subsitute ``/c`` with your drive letter. - -We build and install all RTEMS packages under the `prefix` we just -created. Change to that directory and get a copy of the RSB: - -.. code-block:: shell - - ~ - $ cd /c/opt/rtems - /c/opt/rtems - $ git clone git://git.rtems.org/rtems-source-builder.git rsb - Cloning into 'rsb'... - remote: Counting objects: 5716, done. - remote: Compressing objects: 100% (2183/2183), done. - remote: Total 5716 (delta 3919), reused 5071 (delta 3494) - Receiving objects: 100% (5716/5716), 2.46 MiB | 656.00 KiB/s, done. - Resolving deltas: 100% (3919/3919), done. - Checking connectivity... done. - Checking out files: 100% (630/630), done. - /c/opt/rtems - $ cd rsb - -We are building RTEMS 4.11 tools so select the *4.11* branch: - -.. code-block:: shell - - /c/opt/rtems/rsb - $ git checkout 4.11 - Branch 4.11 set up to track remote branch 4.11 from origin. - Switched to a new branch '4.11' - /c/opt/rtems/rsb - $ - -Check the RSB has a valid environment: - -.. code-block:: shell - - /c/opt/rtems/rsb - $ cd rtems - /c/opt/rtems/rsb/rtems - $ ../source-builder/sb-check - RTEMS Source Builder - Check, 4.11 (01ac76f2f90f) - Environment is ok - /c/opt/rtems/rsb/rtems - $ - -To build a set of RTEMS tools for the Intel ``i386`` architecture. The build -runs a single job rather than a job per CPU in your machine and will take a -long time so please be patient. The RSB creates a log file containing all the -build output and it will be changing size. The RSB command to build ``i386`` -tools is: - -.. code-block:: shell - - /c/opt/rtems/rsb/rtems - $ ../source-builder/sb-set-builder --prefix=/c/opt/rtems/4.11 \ - --jobs=none 4.11/rtems-i386 - RTEMS Source Builder - Set Builder, 4.11 (01ac76f2f90f) - Build Set: 4.11/rtems-i386 - Build Set: 4.11/rtems-autotools.bset - Build Set: 4.11/rtems-autotools-internal.bset - config: tools/rtems-autoconf-2.69-1.cfg - package: autoconf-2.69-x86_64-w64-mingw32-1 - Creating source directory: sources - download: ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz - downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%) - building: autoconf-2.69-x86_64-w64-mingw32-1 - config: tools/rtems-automake-1.12.6-1.cfg - package: automake-1.12.6-x86_64-w64-mingw32-1 - download: ftp://ftp.gnu.org/gnu/automake/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz - downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%) - building: automake-1.12.6-x86_64-w64-mingw32-1 - cleaning: autoconf-2.69-x86_64-w64-mingw32-1 - cleaning: automake-1.12.6-x86_64-w64-mingw32-1 - Build Set: Time 0:00:42.515625 - Build Set: 4.11/rtems-autotools-base.bset - config: tools/rtems-autoconf-2.69-1.cfg - package: autoconf-2.69-x86_64-w64-mingw32-1 - building: autoconf-2.69-x86_64-w64-mingw32-1 - reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-w64-mingw32-1.txt - reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-w64-mingw32-1.xml - config: tools/rtems-automake-1.12.6-1.cfg - package: automake-1.12.6-x86_64-w64-mingw32-1 - building: automake-1.12.6-x86_64-w64-mingw32-1 - reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-w64-mingw32-1.txt - reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-w64-mingw32-1.xml - tarball: tar/rtems-4.11-autotools-x86_64-w64-mingw32-1.tar.bz2 - installing: autoconf-2.69-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11 - installing: automake-1.12.6-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11 - cleaning: autoconf-2.69-x86_64-w64-mingw32-1 - cleaning: automake-1.12.6-x86_64-w64-mingw32-1 - Build Set: Time 0:00:37.718750 - Build Set: Time 0:01:20.234375 - config: devel/expat-2.1.0-1.cfg - package: expat-2.1.0-x86_64-w64-mingw32-1 - download: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz - redirect: http://iweb.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz - downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%) - building: expat-2.1.0-x86_64-w64-mingw32-1 - reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-w64-mingw32-1.txt - reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-w64-mingw32-1.xml - config: tools/rtems-binutils-2.24-1.cfg - package: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1 - download: ftp://ftp.gnu.org/gnu/binutils/binutils-2.24.tar.bz2 -> sources/binutils-2.24.tar.bz2 - downloading: sources/binutils-2.24.tar.bz2 - 21.7MB of 21.7MB (100%) - building: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1 - reporting: tools/rtems-binutils-2.24-1.cfg -> i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1.txt - reporting: tools/rtems-binutils-2.24-1.cfg -> i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1.xml - config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg - package: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1 - download: ftp://ftp.gnu.org/gnu/gcc/gcc-4.9.3/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2 - downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%) - download: ftp://sourceware.org/pub/newlib/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz - downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%) - download: http://www.mpfr.org/mpfr-3.0.1/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2 - downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%) - download: http://www.multiprecision.org/mpc/download/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz - downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%) - download: ftp://ftp.gnu.org/gnu/gmp/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2 - downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%) - building: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1 - reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg -> - i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1.txt - reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg -> - i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1.xml - config: tools/rtems-gdb-7.9-1.cfg - package: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1 - download: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz - downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%) - download: https://git.rtems.org/rtems-tools/plain/tools/4.11/gdb/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff - downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%) - download: https://git.rtems.org/rtems-tools/plain/tools/4.11/gdb/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff - downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%) - building: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1 - reporting: tools/rtems-gdb-7.9-1.cfg -> - i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1.txt - reporting: tools/rtems-gdb-7.9-1.cfg -> - i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1.xml - config: tools/rtems-tools-4.11-1.cfg - package: rtems-tools-4.11-1 - Creating source directory: sources/git - git: clone: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git - git: reset: git://git.rtems.org/rtems-tools.git - git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git - git: checkout: git://git.rtems.org/rtems-tools.git => 4.11 - git: pull: git://git.rtems.org/rtems-tools.git - building: rtems-tools-4.11-1 - reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11-1.txt - reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11-1.xml - config: tools/rtems-kernel-4.11.cfg - installing: expat-2.1.0-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11 - installing: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11 - installing: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11 - installing: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11 - installing: rtems-tools-4.11-1 -> C:\opt\rtems\4.11 - cleaning: expat-2.1.0-x86_64-w64-mingw32-1 - cleaning: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1 - cleaning: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1 - cleaning: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1 - cleaning: rtems-tools-4.11-1 - Build Set: Time 1:32:58.972919 - /c/opt/rtems/rsb/rtems - $ - -Building the Kernel -~~~~~~~~~~~~~~~~~~~ - -We can now build the RTEMS kernel using the RTEMS tools we have just -built. First we need to set the path to the tools: - -.. code-block:: shell - - /c - $ cd /c/opt/rtems - /c/opt/rtems - $ export PATH=/c/opt/rtems/4.11/bin:$PATH - /c/opt/rtems - $ - -We currently build RTEMS from the git release branch for 4.11: - -.. code-block:: shell - - /c/opt/rtems - $ mkdir kernel - /c/opt/rtems - $ cd kernel - /c/opt/rtems/kernel - $ git clone git://git.rtems.org/rtems.git rtems - Cloning into 'rtems'... - remote: Counting objects: 482766, done. - remote: Compressing objects: 100% (88781/88781), done. - remote: Total 482766 (delta 389610), reused 475155 (delta 383437) - Receiving objects: 100% (482766/482766), 69.77 MiB | 697.00 KiB/s, done. - Resolving deltas: 100% (389610/389610), done. - Checking connectivity... done. - Checking out files: 100% (10626/10626), done. - /c/opt/rtems/kernel - $ cd rtems - /c/opt/rtems/kernel/rtems - $ git checkout 4.11 - Checking out files: 100% (2553/2553), done. - Branch 4.11 set up to track remote branch 4.11 from origin. - Switched to a new branch '4.11' - /c/opt/rtems/kernel - $ - -The kernel code cloned from git needs to be `bootstrapped`. Bootstrapping -creates ``autoconf`` and ``automake`` generated files. To bootstrap we first -clean away any files, then generate the pre-install header file lists and -finally we generate the ``autoconf`` and ``automake`` files using the RSB's -bootstrap tool. First we clean any generated files that exist: - -.. code-block:: shell - - /c/opt/rtems/kernel/rtems - $ ./bootstrap -c - removing automake generated Makefile.in files - removing configure files - removing aclocal.m4 files - -Then we generate the pre-install header file automake make files: - -.. code-block:: shell - - /c/opt/rtems/kernel/rtems - $ ./bootstrap -p - Generating ./c/src/ada/preinstall.am - Generating ./c/src/lib/libbsp/arm/altera-cyclone-v/preinstall.am - Generating ./c/src/lib/libbsp/arm/atsam/preinstall.am - Generating ./c/src/lib/libbsp/arm/beagle/preinstall.am - Generating ./c/src/lib/libbsp/arm/csb336/preinstall.am - Generating ./c/src/lib/libbsp/arm/csb337/preinstall.am - Generating ./c/src/lib/libbsp/arm/edb7312/preinstall.am - Generating ./c/src/lib/libbsp/arm/gdbarmsim/preinstall.am - ....... - Generating ./cpukit/score/cpu/mips/preinstall.am - Generating ./cpukit/score/cpu/moxie/preinstall.am - Generating ./cpukit/score/cpu/nios2/preinstall.am - Generating ./cpukit/score/cpu/no_cpu/preinstall.am - Generating ./cpukit/score/cpu/or1k/preinstall.am - Generating ./cpukit/score/cpu/powerpc/preinstall.am - Generating ./cpukit/score/cpu/sh/preinstall.am - Generating ./cpukit/score/cpu/sparc/preinstall.am - Generating ./cpukit/score/cpu/sparc64/preinstall.am - Generating ./cpukit/score/cpu/v850/preinstall.am - Generating ./cpukit/score/preinstall.am - Generating ./cpukit/telnetd/preinstall.am - Generating ./cpukit/wrapup/preinstall.am - Generating ./cpukit/zlib/preinstall.am - /c/opt/rtems/kernel/rtems - -Finally we run the RSB's parallel ``bootstrap`` command: - -.. code-block:: shell - - $ /c/opt/rtems/rsb/source-builder/sb-bootstrap - RTEMS Source Builder - RTEMS Bootstrap, 4.11 (76188ee494dd) - 1/139: autoreconf: configure.ac - 2/139: autoreconf: c/configure.ac - 3/139: autoreconf: c/src/configure.ac - 4/139: autoreconf: c/src/ada-tests/configure.ac - 5/139: autoreconf: c/src/lib/libbsp/arm/configure.ac - 6/139: autoreconf: c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac - 7/139: autoreconf: c/src/lib/libbsp/arm/atsam/configure.ac - 8/139: autoreconf: c/src/lib/libbsp/arm/beagle/configure.ac - 9/139: autoreconf: c/src/lib/libbsp/arm/csb336/configure.ac - 10/139: autoreconf: c/src/lib/libbsp/arm/csb337/configure.ac - 11/139: autoreconf: c/src/lib/libbsp/arm/edb7312/configure.ac - ....... - 129/139: autoreconf: testsuites/samples/configure.ac - 130/139: autoreconf: testsuites/smptests/configure.ac - 131/139: autoreconf: testsuites/sptests/configure.ac - 132/139: autoreconf: testsuites/tmtests/configure.ac - 133/139: autoreconf: testsuites/tools/configure.ac - 134/139: autoreconf: testsuites/tools/generic/configure.ac - 135/139: autoreconf: tools/build/configure.ac - 136/139: autoreconf: tools/cpu/configure.ac - 137/139: autoreconf: tools/cpu/generic/configure.ac - 138/139: autoreconf: tools/cpu/nios2/configure.ac - 139/139: autoreconf: tools/cpu/sh/configure.ac - Bootstrap time: 0:20:38.759766 - /c/opt/rtems/kernel/rtems - $ - -We will build the RTEMS kernel for the ``i386`` target and the ``pc686`` -BSP. You can check the available BSPs by running the ``rtems-bsps`` command -found in the top directory of the RTEMS kernel source. We build the Board -Support Package (BSP) outside the kernel source tree: - -.. code-block:: shell - - /c/opt/rtems/kernel/rtems - $ cd .. - /c/opt/rtems/kernel - $ mkdir pc686 - /c/opt/rtems/kernel - $ cd pc686 - /c/opt/rtems/kernel/pc686 - $ - -Configure the RTEMS kernel to build ``pc686`` BSP for the ``i386`` target with -networking disabled, We will build the external libBSD stack later: - -.. code-block:: shell - - /c/opt/rtems/kernel/pc686 - $ /c/opt/rtems/kernel/rtems/configure --prefix=/c/opt/rtems/4.11 \ - --target=i386-rtems4.11 --disable-networking --enable-rtemsbsp=pc686 - checking for gmake... no - checking for make... make - checking for RTEMS Version... 4.11.99.0 - checking build system type... x86_64-pc-mingw64 - checking host system type... x86_64-pc-mingw64 - checking target system type... i386-pc-rtems4.11 - checking for a BSD-compatible install... /usr/bin/install -c - checking whether build environment is sane... yes - checking for a thread-safe mkdir -p... /usr/bin/mkdir -p - checking for gawk... gawk - checking whether make sets $(MAKE)... yes - checking whether to enable maintainer-specific portions of Makefiles... no - checking that generated files are newer than configure... done - configure: creating ./config.status - configure: configuring in ./tools/build - ....... - checking whether make sets $(MAKE)... yes - checking whether to enable maintainer-specific portions of Makefiles... no - checking that generated files are newer than configure... done - configure: creating ./config.status - config.status: creating Makefile - - target architecture: i386. - available BSPs: pc686. - 'make all' will build the following BSPs: pc686. - other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."' - - config.status: creating Makefile - /c/opt/rtems/kernel/pc686 - $ - -Build the kernel: - -.. code-block:: shell - - /c/opt/rtems/kernel/pc686 - $ make - Making all in tools/build - make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build' - make all-am - make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build' - gcc -DHAVE_CONFIG_H -I. -I/c/opt/rtems/kernel/rtems/tools/build -g -O2 -MT - cklength.o -MD -MP -MF .deps/cklength.Tpo -c -o cklength.o - /c/opt/rtems/kernel/rtems/tools/build/cklength.c - gcc -DHAVE_CONFIG_H -I. -I/c/opt/rtems/kernel/rtems/tools/build -g -O2 -MT - eolstrip.o -MD -MP -MF .deps/eolstrip.Tpo -c -o eolstrip.o - /c/opt/rtems/kernel/rtems/tools/build/eolstrip.c - .......... - i386-rtems4.11-objcopy -O binary nsecs.nxe nsecs.bin - ../../../../../pc686/build-tools/bin2boot -v nsecs.ralf 0x00097E00 - ../../../../../pc686/lib/start16.bin 0x00097C00 0 nsecs.bin 0x00100000 0 - header address 0x00097e00, its memory size 0xzx - first image address 0x00097c00, its memory size 0x00000200 - second image address 0x00100000, its memory size 0x0003d800 - rm -f nsecs.nxe - make[6]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples/nsecs' - make[5]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples' - make[4]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples' - make[4]: Entering directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites' - make[4]: Nothing to be done for 'all-am'. - make[4]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites' - make[3]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites' - make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686' - make[1]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c' - make[1]: Entering directory '/c/opt/rtems/kernel/pc686' - make[1]: Nothing to be done for 'all-am'. - make[1]: Leaving directory '/c/opt/rtems/kernel/pc686' - /c/opt/rtems/kernel/pc696 - $ - -Install the kernel to our prefix: - -.. code-block:: shell - - /c/opt/rtems/kernel/pc686 - $ make install - Making install in tools/build - make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build' - make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build' - /usr/bin/mkdir -p '/c/opt/rtems/4.11/bin' - /usr/bin/install -c cklength.exe eolstrip.exe packhex.exe unhex.exe - rtems-bin2c.exe '/c/opt/rtems/4.11/bin' - /usr/bin/mkdir -p '/c/opt/rtems/4.11/bin' - /usr/bin/install -c install-if-change '/c/opt/rtems/4.11/bin' - make[2]: Nothing to be done for 'install-data-am'. - make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/build' - make[1]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/build' - Making install in tools/cpu - make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu' - Making install in generic - make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic' - make[3]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic' - make[3]: Nothing to be done for 'install-exec-am'. - make[3]: Nothing to be done for 'install-data-am'. - make[3]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic' - make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic' - make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu' - make[3]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu' - make[3]: Nothing to be done for 'install-exec-am'. - make[3]: Nothing to be done for 'install-data-am'. - .......... - make[2]: Entering directory '/c/opt/rtems/kernel/pc686' - make[2]: Nothing to be done for 'install-exec-am'. - /usr/bin/mkdir -p '/c/opt/rtems/4.11/make' - /usr/bin/install -c -m 644 /c/opt/rtems/kernel/rtems/make/main.cfg - /c/opt/rtems/kernel/rtems/make/leaf.cfg '/c/opt/rtems/4.11/make' - /usr/bin/mkdir -p '/c/opt/rtems/4.11/share/rtems4.11/make/Templates' - /usr/bin/install -c -m 644 - /c/opt/rtems/kernel/rtems/make/Templates/Makefile.dir - /c/opt/rtems/kernel/rtems/make/Templates/Makefile.leaf - /c/opt/rtems/kernel/rtems/make/Templates/Makefile.lib - '/c/opt/rtems/4.11/share/rtems4.11/make/Templates' - /usr/bin/mkdir -p '/c/opt/rtems/4.11/make/custom' - /usr/bin/install -c -m 644 /c/opt/rtems/kernel/rtems/make/custom/default.cfg - '/c/opt/rtems/4.11/make/custom' - make[2]: Leaving directory '/c/opt/rtems/kernel/pc686' - make[1]: Leaving directory '/c/opt/rtems/kernel/pc686' - /c/opt/rtems/kernel/pc686 - $ - -Building the LibBSD -~~~~~~~~~~~~~~~~~~~ - -The RTEMS BSD Library or libBSD as it is also known is a package of FreeBSD code -ported to RTEMS. It provides a number of advantanced services including a -networking stack. - -| This needs to move to a new section and be completed. |