diff options
Diffstat (limited to 'user/start/releases.rst')
| -rw-r--r-- | user/start/releases.rst | 284 |
1 files changed, 0 insertions, 284 deletions
diff --git a/user/start/releases.rst b/user/start/releases.rst deleted file mode 100644 index 9f2ebb9..0000000 --- a/user/start/releases.rst +++ /dev/null @@ -1,284 +0,0 @@ -.. comment SPDX-License-Identifier: CC-BY-SA-4.0 - -.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org> -.. comment: All rights reserved. - -.. _released-version: - -Released Version -================ -.. index:: tarball -.. index:: release - -RTEMS releases provide a stable version of the kernel for the supported -architectures. RTEMS maintaines the current and previous releases. Support for -older releases is provided using the RTEMS support channels. - -Please read :ref:`development-hosts` before continuing. - -The following procedure assumes you have installed and configured your host -operating. It also assumes you have installed any dependent packages needed -when building the tools and the kernel. - -You need to select a location to build and install the RTEMS Tool chain and -RTEMS. Make sure there is plenty of disk space and a fast disk is -recommended. Our procedure will document building and installing the tools in a -home directory called :file:`/opt/rtems`. This path will require root -access. If you are working on a machine you do not have root access to you can -use a home directory, :ref:`development-version` has more details about -this. If building on Windows use :file:`/c/opt/rtems` to keep the top level -paths as short as possible. :ref:`microsoft-windows-installation` provides more -detail about path lengths on Windows. - -The location used to install the tools and kernel is called the -`prefix`. :ref:`prefixes` explains prefixes and how to use them. It is best to -have a `prefix` for each different version of RTEMS you are using. If you are -using RTEMS 4.11 in production it is **not** a good idea to install a -development version of 4.12 over the top by using the same `prefix` as the 4.11 -build. A separate `prefix` for each version avoids this. - -Released versions of the RSB download all source code for all packages from the -:r:url:`ftp` rather than from the package's home site. Hosting all the source -on the :r:url:`ftp` ensures the source is present for the life of the -release on the :r:url:`ftp`. If there is a problem accessing the RTEMS FTP -the RSB will fall back to the packages home site. - -The :r:url:`ftp` is hosted at the Oregon State University's The Open Source Lab -(http://osuosl.org/). This is a nonprofit organization working for the -advancement of open source technologies and RTEMS is very fortunate to hosted -here. It has excellent internet access and performance. - -.. note:: **Controlling the RTEMS Kernel Build** - - Building releases by default builds the RTEMS kernel. To not build the RTEMS - kernel add the ``--without-rtems`` option to the RSB command line. - - By default all the BSPs for an architecture are built. If you only wish to - have a specific BSP built you can specify the BSP list by providing to the - RSB the option ``--with-rtemsbsp``. For example to build two BSPs for the - SPARC architecture you can supply ``--with-rtemsbsp="erc32 sis"``. This can - speed the build time up for some architectures that have a lot of BSPs. - -RTEMS Tools Chain ------------------ - -This procedure will build a SPARC tool chain. Set up a suitable workspace to -build the release in. On Unix: - -.. code-block:: shell - - $ cd - $ mkdir -p development/rtems/releases - $ cd development/rtems/releases - -If building on Windows: - -.. code-block:: shell - - $ cd /c - $ mkdir -p opt/rtems - $ cd opt/rtems - -**Note** the paths on Windows will be different to those shown. - -Download the RTEMS Source Builder (RSB) from the RTEMS FTP server: - -.. code-block:: shell - - $ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz - --2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz - Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151 - Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected. - HTTP request sent, awaiting response... 200 OK - Length: 967056 (944K) [application/x-xz] - Saving to: 'rtems-source-builder-4.11.0.tar.xz' - - rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s in 5.5s - - 2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056] - -On Unix unpack the RSB release tar file using: - -.. code-block:: shell - - $ tar Jxf rtems-source-builder-4.11.0.tar.xz - $ cd rtems-source-builder-4.11.0/rtems/ - -On Windows you need to shorten the path (See :ref:`windows-path-length`) after -you have unpacked the tar file: - -.. code-block:: shell - - $ tar Jxf rtems-source-builder-4.11.0.tar.xz - $ mv rtems-source-builder-4.11.0 4.110 - $ cd 4.11.0 - -Build a tool chain for the SPARC architecure. We are using the SPARC -architecture in our example because GDB has a good simulator that lets us run -and test the samples RTEMS builds by default - -If building on Windows add ``--jobs=none`` to avoid GNU make issues on Windows -discussed in :ref:`msys2_parallel_builds`. - -.. code-block:: shell - - $ ../source-builder/sb-set-builder \ - --prefix=/opt/rtems/4.11 4.11/rtems-sparc - Build Set: 4.11/rtems-sparc - Build Set: 4.11/rtems-autotools.bset - Build Set: 4.11/rtems-autotools-internal.bset - config: tools/rtems-autoconf-2.69-1.cfg - package: autoconf-2.69-x86_64-freebsd10.1-1 - Creating source directory: sources - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz - downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%) - building: autoconf-2.69-x86_64-freebsd10.1-1 - config: tools/rtems-automake-1.12.6-1.cfg - package: automake-1.12.6-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz - downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%) - Creating source directory: patches - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%) - building: automake-1.12.6-x86_64-freebsd10.1-1 - cleaning: autoconf-2.69-x86_64-freebsd10.1-1 - cleaning: automake-1.12.6-x86_64-freebsd10.1-1 - Build Set: Time 0:00:32.749337 - Build Set: 4.11/rtems-autotools-base.bset - config: tools/rtems-autoconf-2.69-1.cfg - package: autoconf-2.69-x86_64-freebsd10.1-1 - building: autoconf-2.69-x86_64-freebsd10.1-1 - reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml - config: tools/rtems-automake-1.12.6-1.cfg - package: automake-1.12.6-x86_64-freebsd10.1-1 - building: automake-1.12.6-x86_64-freebsd10.1-1 - reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml - installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - cleaning: autoconf-2.69-x86_64-freebsd10.1-1 - cleaning: automake-1.12.6-x86_64-freebsd10.1-1 - Build Set: Time 0:00:15.619219 - Build Set: Time 0:00:48.371085 - config: devel/expat-2.1.0-1.cfg - package: expat-2.1.0-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz - downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%) - building: expat-2.1.0-x86_64-freebsd10.1-1 - reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt - reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml - config: tools/rtems-binutils-2.26-1.cfg - package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2 - downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%) - building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 - reporting: tools/rtems-binutils-2.26-1.cfg -> - sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-binutils-2.26-1.cfg -> - sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml - config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg - package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2 - downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz - downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2 - downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz - downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2 - downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%) - building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 - reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg -> - sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg -> - sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml - config: tools/rtems-gdb-7.9-1.cfg - package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz - downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch - downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch - downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff - downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff - downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py - downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%) - building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 - reporting: tools/rtems-gdb-7.9-1.cfg -> - sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-gdb-7.9-1.cfg -> - sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml - config: tools/rtems-tools-4.11-1.cfg - package: rtems-tools-4.11.0-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz - downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%) - building: rtems-tools-4.11.0-1 - reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt - reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml - config: tools/rtems-kernel-4.11.cfg - package: sparc-rtems4.11-kernel-4.11.0-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz - downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%) - building: sparc-rtems4.11-kernel-4.11.0-1 - reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt - reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml - installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0 - installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0 - cleaning: expat-2.1.0-x86_64-freebsd10.1-1 - cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 - cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 - cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 - cleaning: rtems-tools-4.11.0-1 - cleaning: sparc-rtems4.11-kernel-4.11.0-1 - Build Set: Time 0:19:15.713662 |