diff options
Diffstat (limited to 'user/start/bsp-build.rst')
| -rw-r--r-- | user/start/bsp-build.rst | 93 |
1 files changed, 46 insertions, 47 deletions
diff --git a/user/start/bsp-build.rst b/user/start/bsp-build.rst index 335962b..6ffe9b0 100644 --- a/user/start/bsp-build.rst +++ b/user/start/bsp-build.rst @@ -154,30 +154,29 @@ by ``$BASE``. .. code-block:: none - Setting top to : $BASE/src/rtems - Setting out to : $BASE/src/rtems/build - Regenerate build specification cache (needs a couple of seconds)... - Configure board support package (BSP) : sparc/erc32 - Checking for program 'sparc-rtems5-gcc' : $BASE/rtems/5/bin/sparc-rtems5-gcc - Checking for program 'sparc-rtems5-g++' : $BASE/rtems/5/bin/sparc-rtems5-g++ - Checking for program 'sparc-rtems5-ar' : $BASE/rtems/5/bin/sparc-rtems5-ar - Checking for program 'sparc-rtems5-ld' : $BASE/rtems/5/bin/sparc-rtems5-ld - Checking for program 'ar' : $BASE/rtems/5/bin/sparc-rtems5-ar - Checking for program 'g++, c++' : $BASE/rtems/5/bin/sparc-rtems5-g++ - Checking for program 'ar' : $BASE/rtems/5/bin/sparc-rtems5-ar - Checking for program 'gas, gcc' : $BASE/rtems/5/bin/sparc-rtems5-gcc - Checking for program 'ar' : $BASE/rtems/5/bin/sparc-rtems5-ar - Checking for program 'gcc, cc' : $BASE/rtems/5/bin/sparc-rtems5-gcc - Checking for program 'ar' : $BASE/rtems/5/bin/sparc-rtems5-ar - Checking for c flags '-MMD' : yes - Checking for cxx flags '-MMD' : yes - Checking for program 'rtems-bin2c' : $BASE/rtems/5/bin/rtems-bin2c - Checking for program 'gzip' : /usr/bin/gzip - Checking for program 'pax' : /usr/bin/pax - Checking for program 'rtems-ld' : $BASE/rtems/5/bin/rtems-ld - Checking for program 'rtems-syms' : $BASE/rtems/5/bin/rtems-syms - Checking for program 'xz' : /usr/bin/xz - 'configure' finished successfully (11.069s) + Setting top to : $BASE/quick-start/src/rtems + Setting out to : $BASE/quick-start/src/rtems/build + Configure board support package (BSP) : sparc/erc32 + Checking for program 'sparc-rtems6-gcc' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-gcc + Checking for program 'sparc-rtems6-g++' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-g++ + Checking for program 'sparc-rtems6-ar' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-ar + Checking for program 'sparc-rtems6-ld' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-ld + Checking for program 'ar' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-ar + Checking for program 'g++, c++' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-g++ + Checking for program 'ar' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-ar + Checking for program 'gas, gcc' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-gcc + Checking for program 'ar' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-ar + Checking for program 'gcc, cc' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-gcc + Checking for program 'ar' : $BASE/quick-start/rtems/6/bin/sparc-rtems6-ar + Checking for asm flags '-MMD' : yes + Checking for c flags '-MMD' : yes + Checking for cxx flags '-MMD' : yes + Checking for program 'rtems-bin2c' : $BASE/quick-start/rtems/6/bin/rtems-bin2c + Checking for program 'gzip' : /usr/bin/gzip + Checking for program 'rtems-ld' : $BASE/quick-start/rtems/6/bin/rtems-ld + Checking for program 'rtems-syms' : $BASE/quick-start/rtems/6/bin/rtems-syms + Checking for program 'xz' : $BASE/anaconda3/bin/xz + 'configure' finished successfully (0.414s) Building the BSP is the second step. @@ -191,17 +190,17 @@ This command should output something like this (omitted lines are denoted by .. code-block:: none - Waf: Entering directory `$BASE/src/rtems/build' - Waf: Leaving directory `$BASE/src/rtems/build' - 'build' finished successfully (0.546s) - Waf: Entering directory `$BASE/src/rtems/build/sparc/erc32' - [ 1/3922] Compiling bsps/sparc/shared/start/start.S - [ 2/3922] Compiling bsps/shared/dev/serial/mc68681_reg4.c - [ 3/3922] Compiling bsps/shared/dev/rtc/icm7170.c - ... - [4038/4038] Linking build/sparc/erc32/testsuites/tmtests/tmoverhd.exe - Waf: Leaving directory `$BASE/src/rtems/build/sparc/erc32' - 'build_sparc/erc32' finished successfully (58.678s) + Waf: Entering directory `$BASE/quick-start/src/rtems/build' + Waf: Leaving directory `$BASE/quick-start/src/rtems/build' + 'build' finished successfully (0.085s) + Waf: Entering directory `$BASE/quick-start/src/rtems/build/sparc/erc32' + [ 1/4093] Compiling bsps/shared/dev/serial/mc68681_reg2.c + [ 2/4093] Compiling bsps/shared/dev/rtc/mc146818a_ioreg.c + [ 3/4093] Compiling bsps/shared/dev/flash/am29lv160.c + ... + [4093/4093] Processing link: build/sparc/erc32/testsuites/libtests/dl01/dl01-tar.o build/sparc/erc32/testsuites/libtests/dl01/init.o build/sparc/erc32/testsuites/libtests/dl01/dl-load.o build/sparc/erc32/testsuites/libtests/dl01/dl01-sym.o -> build/sparc/erc32/testsuites/libtests/dl01.exe + Waf: Leaving directory `$BASE/quick-start/src/rtems/build/sparc/erc32' + 'build_sparc/erc32' finished successfully (2m14.111s) The last step is to install the BSP. @@ -216,16 +215,16 @@ by ``$BASE``. .. code-block:: none - Waf: Entering directory `$BASE/src/rtems/build' - Waf: Leaving directory `$BASE/src/rtems/build' - 'install' finished successfully (0.544s) - Waf: Entering directory `$BASE/src/rtems/build/sparc/erc32' - + install $BASE/rtems/5/sparc-rtems5/erc32/lib/start.o (from build/sparc/erc32/start.o) - + install $BASE/rtems/5/sparc-rtems5/erc32/lib/include/bspopts.h (from build/sparc/erc32/bsps/include/bspopts.h) - + install $BASE/rtems/5/sparc-rtems5/erc32/lib/include/rtems/zilog/z8036.h (from bsps/include/rtems/zilog/z8036.h) + Waf: Entering directory `$BASE/quick-start/src/rtems/build' + Waf: Leaving directory `$BASE/quick-start/src/rtems/build' + 'install' finished successfully (0.081s) + Waf: Entering directory `$BASE/quick-start/src/rtems/build/sparc/erc32' + + install $BASE/quick-start/rtems/6/sparc-rtems6/erc32/lib/include/libchip/am29lv160.h (from bsps/include/libchip/am29lv160.h) + + install $BASE/quick-start/rtems/6/sparc-rtems6/erc32/lib/include/libchip/mc146818a.h (from bsps/include/libchip/mc146818a.h) + + install $BASE/quick-start/rtems/6/sparc-rtems6/erc32/lib/include/libchip/mc68681.h (from bsps/include/libchip/mc68681.h)) ... - + install $BASE/rtems/5/sparc-rtems5/erc32/lib/include/rtems/score/watchdogimpl.h (from cpukit/include/rtems/score/watchdogimpl.h) - + install $BASE/rtems/5/sparc-rtems5/erc32/lib/include/rtems/score/watchdogticks.h (from cpukit/include/rtems/score/watchdogticks.h) - + install $BASE/rtems/5/sparc-rtems5/erc32/lib/include/rtems/score/wkspace.h (from cpukit/include/rtems/score/wkspace.h) - Waf: Leaving directory `$BASE/src/rtems/build/sparc/erc32' - 'install_sparc/erc32' finished successfully (2.985s) + + install $BASE/quick-start/rtems/6/sparc-rtems6/erc32/lib/include/rtems/score/watchdogticks.h (from cpukit/include/rtems/score/watchdogticks.h) + + install $BASE/quick-start/rtems/6/sparc-rtems6/erc32/lib/include/rtems/score/wkspace.h (from cpukit/include/rtems/score/wkspace.h) + + install $BASE/quick-start/rtems/6/sparc-rtems6/erc32/lib/include/rtems/score/wkspacedata.h (from cpukit/include/rtems/score/wkspacedata.h) + Waf: Leaving directory `$BASE/quick-start/src/rtems/build/sparc/erc32' + 'install_sparc/erc32' finished successfully (1.834s)) |