diff options
Diffstat (limited to 'c-user/region_manager.rst')
-rw-r--r-- | c-user/region_manager.rst | 774 |
1 files changed, 0 insertions, 774 deletions
diff --git a/c-user/region_manager.rst b/c-user/region_manager.rst deleted file mode 100644 index f9cfb46..0000000 --- a/c-user/region_manager.rst +++ /dev/null @@ -1,774 +0,0 @@ -.. SPDX-License-Identifier: CC-BY-SA-4.0 - -.. Copyright (C) 1988, 2008 On-Line Applications Research Corporation (OAR) - -.. index:: regions - -Region Manager -************** - -Introduction -============ - -The region manager provides facilities to dynamically allocate memory in -variable sized units. The directives provided by the region manager are: - -- rtems_region_create_ - Create a region - -- rtems_region_ident_ - Get ID of a region - -- rtems_region_delete_ - Delete a region - -- rtems_region_extend_ - Add memory to a region - -- rtems_region_get_segment_ - Get segment from a region - -- rtems_region_return_segment_ - Return segment to a region - -- rtems_region_get_segment_size_ - Obtain size of a segment - -- rtems_region_resize_segment_ - Change size of a segment - -- rtems_region_get_information_ - Get region information - -- rtems_region_get_free_information_ - Get region free information - -Background -========== - -.. index:: region, definition -.. index:: segment, definition - -Region Manager Definitions --------------------------- - -A region makes up a physically contiguous memory space with user-defined -boundaries from which variable-sized segments are dynamically allocated and -deallocated. A segment is a variable size section of memory which is allocated -in multiples of a user-defined page size. This page size is required to be a -multiple of four greater than or equal to four. For example, if a request for -a 350-byte segment is made in a region with 256-byte pages, then a 512-byte -segment is allocated. - -Regions are organized as doubly linked chains of variable sized memory blocks. -Memory requests are allocated using a first-fit algorithm. If available, the -requester receives the number of bytes requested (rounded up to the next page -size). RTEMS requires some overhead from the region's memory for each segment -that is allocated. Therefore, an application should only modify the memory of -a segment that has been obtained from the region. The application should NOT -modify the memory outside of any obtained segments and within the region's -boundaries while the region is currently active in the system. - -Upon return to the region, the free block is coalesced with its neighbors (if -free) on both sides to produce the largest possible unused block. - -.. index:: region attribute set, building - -Building an Attribute Set -------------------------- - -In general, an attribute set is built by a bitwise OR of the desired attribute -components. The set of valid region attributes is provided in the following -table: - -.. list-table:: - :class: rtems-table - - * - ``RTEMS_FIFO`` - - tasks wait by FIFO (default) - * - ``RTEMS_PRIORITY`` - - tasks wait by priority - -Attribute values are specifically designed to be mutually exclusive, therefore -bitwise OR and addition operations are equivalent as long as each attribute -appears exactly once in the component list. An attribute listed as a default -is not required to appear in the attribute list, although it is a good -programming practice to specify default attributes. If all defaults are -desired, the attribute ``RTEMS_DEFAULT_ATTRIBUTES`` should be specified on this -call. - -This example demonstrates the attribute_set parameter needed to create a region -with the task priority waiting queue discipline. The attribute_set parameter -to the ``rtems_region_create`` directive should be ``RTEMS_PRIORITY``. - -Building an Option Set ----------------------- - -In general, an option is built by a bitwise OR of the desired option -components. The set of valid options for the ``rtems_region_get_segment`` -directive are listed in the following table: - -.. list-table:: - :class: rtems-table - - * - ``RTEMS_WAIT`` - - task will wait for segment (default) - * - ``RTEMS_NO_WAIT`` - - task should not wait - -Option values are specifically designed to be mutually exclusive, therefore -bitwise OR and addition operations are equivalent as long as each option -appears exactly once in the component list. An option listed as a default is -not required to appear in the option list, although it is a good programming -practice to specify default options. If all defaults are desired, the -option ``RTEMS_DEFAULT_OPTIONS`` should be specified on this call. - -This example demonstrates the option parameter needed to poll for a segment. -The option parameter passed to the ``rtems_region_get_segment`` directive -should be ``RTEMS_NO_WAIT``. - -Operations -========== - -Creating a Region ------------------ - -The ``rtems_region_create`` directive creates a region with the user-defined -name. The user may select FIFO or task priority as the method for placing -waiting tasks in the task wait queue. RTEMS allocates a Region Control Block -(RNCB) from the RNCB free list to maintain the newly created region. RTEMS -also generates a unique region ID which is returned to the calling task. - -It is not possible to calculate the exact number of bytes available to the user -since RTEMS requires overhead for each segment allocated. For example, a -region with one segment that is the size of the entire region has more -available bytes than a region with two segments that collectively are the size -of the entire region. This is because the region with one segment requires -only the overhead for one segment, while the other region requires the overhead -for two segments. - -Due to automatic coalescing, the number of segments in the region dynamically -changes. Therefore, the total overhead required by RTEMS dynamically changes. - -Obtaining Region IDs --------------------- - -When a region is created, RTEMS generates a unique region ID and assigns it to -the created region until it is deleted. The region ID may be obtained by -either of two methods. First, as the result of an invocation of the -``rtems_region_create`` directive, the region ID is stored in a user provided -location. Second, the region ID may be obtained later using the -``rtems_region_ident`` directive. The region ID is used by other region -manager directives to access this region. - -Adding Memory to a Region -------------------------- - -The ``rtems_region_extend`` directive may be used to add memory to an existing -region. The caller specifies the size in bytes and starting address of the -memory being added. - -Acquiring a Segment -------------------- - -The ``rtems_region_get_segment`` directive attempts to acquire a segment from a -specified region. If the region has enough available free memory, then a -segment is returned successfully to the caller. When the segment cannot be -allocated, one of the following situations applies: - -- By default, the calling task will wait forever to acquire the segment. - -- Specifying the ``RTEMS_NO_WAIT`` option forces an immediate return with an - error status code. - -- Specifying a timeout limits the interval the task will wait before returning - with an error status code. - -If the task waits for the segment, then it is placed in the region's task wait -queue in either FIFO or task priority order. All tasks waiting on a region are -returned an error when the message queue is deleted. - -Releasing a Segment -------------------- - -When a segment is returned to a region by the ``rtems_region_return_segment`` -directive, it is merged with its unallocated neighbors to form the largest -possible segment. The first task on the wait queue is examined to determine if -its segment request can now be satisfied. If so, it is given a segment and -unblocked. This process is repeated until the first task's segment request -cannot be satisfied. - -Obtaining the Size of a Segment -------------------------------- - -The ``rtems_region_get_segment_size`` directive returns the size in bytes of -the specified segment. The size returned includes any "extra" memory included -in the segment because of rounding up to a page size boundary. - -Changing the Size of a Segment ------------------------------- - -The ``rtems_region_resize_segment`` directive is used to change the size in -bytes of the specified segment. The size may be increased or decreased. When -increasing the size of a segment, it is possible that the request cannot be -satisfied. This directive provides functionality similar to the ``realloc()`` -function in the Standard C Library. - -Deleting a Region ------------------ - -A region can be removed from the system and returned to RTEMS with the -``rtems_region_delete`` directive. When a region is deleted, its control block -is returned to the RNCB free list. A region with segments still allocated is -not allowed to be deleted. Any task attempting to do so will be returned an -error. As a result of this directive, all tasks blocked waiting to obtain a -segment from the region will be readied and returned a status code which -indicates that the region was deleted. - -Directives -========== - -This section details the region manager's directives. A subsection is -dedicated to each of this manager's directives and describes the calling -sequence, related constants, usage, and status codes. - -.. raw:: latex - - \clearpage - -.. index:: create a region - -.. _rtems_region_create: - -REGION_CREATE - Create a region -------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_create( - rtems_name name, - void *starting_address, - uintptr_t length, - uintptr_t page_size, - rtems_attribute attribute_set, - rtems_id *id - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - region created successfully - * - ``RTEMS_INVALID_NAME`` - - invalid region name - * - ``RTEMS_INVALID_ADDRESS`` - - ``id`` is NULL - * - ``RTEMS_INVALID_ADDRESS`` - - ``starting_address`` is NULL - * - ``RTEMS_TOO_MANY`` - - too many regions created - * - ``RTEMS_INVALID_SIZE`` - - invalid page size - * - ``RTEMS_INVALID_SIZE`` - - the memory area defined by the starting address and the length - parameters is too small - -DESCRIPTION: - This directive creates a region from a contiguous memory area - which starts at starting_address and is length bytes long. The memory area - must be large enough to contain some internal region administration data. - Segments allocated from the region will be a multiple of page_size bytes in - length. The specified page size will be aligned to an - architecture-specific minimum alignment if necessary. - - The assigned region id is returned in id. This region id is used as an - argument to other region related directives to access the region. - - For control and maintenance of the region, RTEMS allocates and initializes - an RNCB from the RNCB free pool. Thus memory from the region is not used - to store the RNCB. However, some overhead within the region is required by - RTEMS each time a segment is constructed in the region. - - Specifying ``RTEMS_PRIORITY`` in attribute_set causes tasks waiting for a - segment to be serviced according to task priority. Specifying - ``RTEMS_FIFO`` in attribute_set or selecting ``RTEMS_DEFAULT_ATTRIBUTES`` - will cause waiting tasks to be serviced in First In-First Out order. - -NOTES: - This directive will obtain the allocator mutex and may cause the calling - task to be preempted. - - The following region attribute constants are defined by RTEMS: - - .. list-table:: - :class: rtems-table - - * - ``RTEMS_FIFO`` - - tasks wait by FIFO (default) - * - ``RTEMS_PRIORITY`` - - tasks wait by priority - -.. raw:: latex - - \clearpage - -.. index:: get ID of a region -.. index:: obtain ID of a region -.. index:: rtems_region_ident - -.. _rtems_region_ident: - -REGION_IDENT - Get ID of a region ---------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_ident( - rtems_name name, - rtems_id *id - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - region identified successfully - * - ``RTEMS_INVALID_ADDRESS`` - - ``id`` is NULL - * - ``RTEMS_INVALID_NAME`` - - region name not found - -DESCRIPTION: - - This directive obtains the region id associated with the region name to be - acquired. If the region name is not unique, then the region id will match - one of the regions with that name. However, this region id is not - guaranteed to correspond to the desired region. The region id is used to - access this region in other region manager directives. - -NOTES: - This directive will not cause the running task to be preempted. - -.. raw:: latex - - \clearpage - -.. index:: delete a region -.. index:: rtems_region_delete - -.. _rtems_region_delete: - -REGION_DELETE - Delete a region -------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_delete( - rtems_id id - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - region deleted successfully - * - ``RTEMS_INVALID_ID`` - - invalid region id - * - ``RTEMS_RESOURCE_IN_USE`` - - segments still in use - -DESCRIPTION: - This directive deletes the region specified by id. The region cannot be - deleted if any of its segments are still allocated. The RNCB for the - deleted region is reclaimed by RTEMS. - -NOTES: - This directive will obtain the allocator mutex and may cause the calling - task to be preempted. - - The calling task does not have to be the task that created the region. Any - local task that knows the region id can delete the region. - -.. raw:: latex - - \clearpage - -.. index:: add memory to a region -.. index:: region, add memory -.. index:: rtems_region_extend - -.. _rtems_region_extend: - -REGION_EXTEND - Add memory to a region --------------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_extend( - rtems_id id, - void *starting_address, - uintptr_t length - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - region extended successfully - * - ``RTEMS_INVALID_ADDRESS`` - - ``starting_address`` is NULL - * - ``RTEMS_INVALID_ID`` - - invalid region id - * - ``RTEMS_INVALID_ADDRESS`` - - invalid address of area to add - -DESCRIPTION: - This directive adds the memory area which starts at - :c:data:`starting_address` for :c:data:`length` bytes to the region - specified by :c:data:`id`. - - There are no alignment requirements for the memory area. The memory area - must be big enough to contain some maintenance blocks. It must not overlap - parts of the current heap memory areas. Disconnected memory areas added to - the heap will lead to used blocks which cover the gaps. Extending with an - inappropriate memory area will corrupt the heap resulting in undefined - behaviour. - -NOTES: - This directive will obtain the allocator mutex and may cause the calling - task to be preempted. - - The calling task does not have to be the task that created the region. Any - local task that knows the region identifier can extend the region. - -.. raw:: latex - - \clearpage - -.. index:: get segment from region -.. index:: rtems_region_get_segment - -.. _rtems_region_get_segment: - -REGION_GET_SEGMENT - Get segment from a region ----------------------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_get_segment( - rtems_id id, - uintptr_t size, - rtems_option option_set, - rtems_interval timeout, - void **segment - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - segment obtained successfully - * - ``RTEMS_INVALID_ADDRESS`` - - ``segment`` is NULL - * - ``RTEMS_INVALID_ID`` - - invalid region id - * - ``RTEMS_INVALID_SIZE`` - - request is for zero bytes or exceeds the size of maximum segment which is - possible for this region - * - ``RTEMS_UNSATISFIED`` - - segment of requested size not available - * - ``RTEMS_TIMEOUT`` - - timed out waiting for segment - * - ``RTEMS_OBJECT_WAS_DELETED`` - - region deleted while waiting - -DESCRIPTION: - This directive obtains a variable size segment from the region specified by - ``id``. The address of the allocated segment is returned in segment. The - ``RTEMS_WAIT`` and ``RTEMS_NO_WAIT`` components of the options parameter - are used to specify whether the calling tasks wish to wait for a segment to - become available or return immediately if no segment is available. For - either option, if a sufficiently sized segment is available, then the - segment is successfully acquired by returning immediately with the - ``RTEMS_SUCCESSFUL`` status code. - - If the calling task chooses to return immediately and a segment large - enough is not available, then an error code indicating this fact is - returned. If the calling task chooses to wait for the segment and a - segment large enough is not available, then the calling task is placed on - the region's segment wait queue and blocked. If the region was created - with the ``RTEMS_PRIORITY`` option, then the calling task is inserted into - the wait queue according to its priority. However, if the region was - created with the ``RTEMS_FIFO`` option, then the calling task is placed at - the rear of the wait queue. - - The timeout parameter specifies the maximum interval that a task is willing - to wait to obtain a segment. If timeout is set to ``RTEMS_NO_TIMEOUT``, - then the calling task will wait forever. - -NOTES: - This directive will obtain the allocator mutex and may cause the calling - task to be preempted. - - The actual length of the allocated segment may be larger than the requested - size because a segment size is always a multiple of the region's page size. - - The following segment acquisition option constants are defined by RTEMS: - - .. list-table:: - :class: rtems-table - - * - ``RTEMS_WAIT`` - - task will wait for segment (default) - * - ``RTEMS_NO_WAIT`` - - task should not wait - - A clock tick is required to support the timeout functionality of this - directive. - -.. raw:: latex - - \clearpage - -.. index:: return segment to region -.. index:: rtems_region_return_segment - -.. _rtems_region_return_segment: - -REGION_RETURN_SEGMENT - Return segment to a region --------------------------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_return_segment( - rtems_id id, - void *segment - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - segment returned successfully - * - ``RTEMS_INVALID_ADDRESS`` - - ``segment`` is NULL - * - ``RTEMS_INVALID_ID`` - - invalid region id - * - ``RTEMS_INVALID_ADDRESS`` - - segment address not in region - -DESCRIPTION: - This directive returns the segment specified by segment to the region - specified by id. The returned segment is merged with its neighbors to form - the largest possible segment. The first task on the wait queue is examined - to determine if its segment request can now be satisfied. If so, it is - given a segment and unblocked. This process is repeated until the first - task's segment request cannot be satisfied. - -NOTES: - This directive will cause the calling task to be preempted if one or more - local tasks are waiting for a segment and the following conditions exist: - - - a waiting task has a higher priority than the calling task - - - the size of the segment required by the waiting task is less than or - equal to the size of the segment returned. - -.. raw:: latex - - \clearpage - -.. index:: get size of segment -.. index:: rtems_region_get_segment_size - -.. _rtems_region_get_segment_size: - -REGION_GET_SEGMENT_SIZE - Obtain size of a segment --------------------------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_get_segment_size( - rtems_id id, - void *segment, - uintptr_t *size - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - segment obtained successfully - * - ``RTEMS_INVALID_ADDRESS`` - - ``segment`` is NULL - * - ``RTEMS_INVALID_ADDRESS`` - - ``size`` is NULL - * - ``RTEMS_INVALID_ID`` - - invalid region id - * - ``RTEMS_INVALID_ADDRESS`` - - segment address not in region - -DESCRIPTION: - This directive obtains the size in bytes of the specified segment. - -NOTES: - The actual length of the allocated segment may be larger than the requested - size because a segment size is always a multiple of the region's page size. - -.. raw:: latex - - \clearpage - -.. index:: resize segment -.. index:: rtems_region_resize_segment - -.. _rtems_region_resize_segment: - -REGION_RESIZE_SEGMENT - Change size of a segment ------------------------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_resize_segment( - rtems_id id, - void *segment, - uintptr_t new_size, - uintptr_t *old_size - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - segment obtained successfully - * - ``RTEMS_INVALID_ADDRESS`` - - ``segment`` is NULL - * - ``RTEMS_INVALID_ADDRESS`` - - ``old_size`` is NULL - * - ``RTEMS_INVALID_ID`` - - invalid region id - * - ``RTEMS_INVALID_ADDRESS`` - - segment address not in region - * - ``RTEMS_UNSATISFIED`` - - unable to make segment larger - -DESCRIPTION: - This directive is used to increase or decrease the size of a segment. When - increasing the size of a segment, it is possible that there is not memory - available contiguous to the segment. In this case, the request is - unsatisfied. - -NOTES: - This directive will obtain the allocator mutex and may cause the calling - task to be preempted. - - If an attempt to increase the size of a segment fails, then the application - may want to allocate a new segment of the desired size, copy the contents - of the original segment to the new, larger segment and then return the - original segment. - -.. raw:: latex - - \clearpage - -.. index:: obtain region information -.. index:: rtems_region_get_information - -.. _rtems_region_get_information: - -REGION_GET_INFORMATION - Get region information ------------------------------------------------ - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_get_information( - rtems_id id, - Heap_Information_block *the_info - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - information obtained successfully - * - ``RTEMS_INVALID_ADDRESS`` - - ``the_info`` is NULL - * - ``RTEMS_INVALID_ID`` - - invalid region id - -DESCRIPTION: - This directive is used to obtain information about the used and free memory - in the region specified by ``id``. This is a snapshot at the time - of the call. The information will be returned in the structure pointed to - by ``the_info``. - -NOTES: - This directive will obtain the allocator mutex and may cause the calling - task to be preempted. - - This is primarily intended as a mechanism to obtain a diagnostic information. - This method forms am O(n) scan of the free and an O(n) scan of the - used blocks in the region to calculate the information provided. Given that - the execution time is driven by the number of used and free blocks, it can - take a non-deterministic time to execute. - -.. raw:: latex - - \clearpage - -.. index:: obtain region information on free blocks -.. index:: rtems_region_get_free_information - -.. _rtems_region_get_free_information: - -REGION_GET_FREE_INFORMATION - Get region free information ---------------------------------------------------------- - -CALLING SEQUENCE: - .. code-block:: c - - rtems_status_code rtems_region_get_free_information( - rtems_id id, - Heap_Information_block *the_info - ); - -DIRECTIVE STATUS CODES: - .. list-table:: - :class: rtems-table - - * - ``RTEMS_SUCCESSFUL`` - - information obtained successfully - * - ``RTEMS_INVALID_ADDRESS`` - - ``the_info`` is NULL - * - ``RTEMS_INVALID_ID`` - - invalid region id - -DESCRIPTION: - This directive is used to obtain information about the free memory - in the region specified by ``id``. This is a snapshot at the time - of the call. The information will be returned in the structure pointed to - by ``the_info``. - -NOTES: - This directive will obtain the allocator mutex and may cause the calling - task to be preempted. - - This uses the same structure to return information as the - ``rtems_region_get_information`` directive but does not fill in the - used information. - - This is primarily intended as a mechanism to obtain a diagnostic information. - This method forms am O(n) scan of the free in the region to calculate - the information provided. Given that the execution time is driven by - the number of used and free blocks, it can take a non-deterministic - time to execute. Typically, there are many used blocks and a much smaller - number of used blocks making a call to this directive less expensive than - a call to ``rtems_region_get_information``. |