user: Document BSP new build system

Update #3818.

1 files changed, 0 insertions, 61 deletions

diff --git a/user/start/bootstrap.rst b/user/start/bootstrap.rst
deleted file mode 100644
index 1594f89..0000000
--- a/user/start/bootstrap.rst
+++ /dev/null
@@ -1,61 +0,0 @@
-.. SPDX-License-Identifier: CC-BY-SA-4.0
-
-.. Copyright (C) 2019 embedded brains GmbH
-.. Copyright (C) 2019 Sebastian Huber
-
-.. _QuickStartBootstrap:
-
-Bootstrap the RTEMS Sources
-===========================
-
-You installed the tool suite in your installation prefix and made ready the
-source for two RTEMS source packages in the previous sections.  We installed
-the tool suite in :file:`$HOME/quick-start/rtems/5` and unpacked the RSB source
-in :file:`$HOME/quick-start/src`.
-
-You only need to *bootstrap* the RTEMS sources if you have used
-:ref:`QuickStartSources_Git` to get the sources. If you use source archives of
-a released RTEMS version you can skip this section and move to
-:ref:`QuickStartBSPBuild`.
-
-Before you can build a :ref:`Board Support Package (BSP) <BSPs>` for your
-target hardware from Git cloned RTEMS sources, you have to bootstrap the build
-system in the RTEMS sources.  This is only necessary if you use a Git
-repository clone of the RTEMS sources.  You have to do this after a fresh
-repository clone and sometimes after build system file updates (e.g.  after a
-``git pull``).  If you are not a build system expert, then do the bootstrap
-after each update of build system files.  This is a bit annoying, but improving
-the build system is a complex and time consuming undertaking.  Feel free to
-help the RTEMS Project to improve it.  For the bootstrap it is important that
-the right version of Autotools (:file:`autoconf` and :file:`automake`) are in
-your ``$PATH``.  The right version of Autotools is shipped with the RTEMS tool
-suite you already installed. Set the path to the tool suite installed under
-your selected *prefix*:
-
-.. code-block:: none
-
-    export PATH=$HOME/quick-start/rtems/5/bin:"$PATH"
-
-Change into the RTEMS source tree to *bootstrap* the build system:
-
-.. code-block:: none
-
-    cd $HOME/quick-start/src/rtems
-    ./rtems-bootstrap
-
-This command should output something like this (omitted lines are denoted by
-``...``):
-
-.. code-block:: none
-
-    RTEMS Bootstrap, 1.0
-      1/122: autoreconf: configure.ac
-      2/122: autoreconf: testsuites/configure.ac
-      3/122: autoreconf: testsuites/fstests/configure.ac
-      4/122: autoreconf: testsuites/smptests/configure.ac
-      5/122: autoreconf: testsuites/psxtests/configure.ac
-      6/122: autoreconf: testsuites/mptests/configure.ac
-    ...
-    121/122: autoreconf: c/src/lib/libbsp/lm32/milkymist/configure.ac
-    122/122: autoreconf: c/src/make/configure.ac
-    Bootstrap time: 0:00:46.404643