|
|
.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
.. comment: All rights reserved.
.. _microsoft-windows-installation:
Microsoft Windows
-----------------
.. index:: Microsoft Windows Installation
This section details how you create an RTEMS development environment on
Windows. The installation documented here is on `Windows 7 64bit Professional`.
Developing on Windows
~~~~~~~~~~~~~~~~~~~~~
RTEMS supports Windows as a development host and the tools for most
architectures are available. The RTEMS Project relies on the GNU tools for
compilers and debuggers and we use the simulators that come with GDB and
QEMU. The Windows support for these tools varies and the RTEMS Project is
committed to helping the open source community improve the Windows
experience. If something is not working or supported please email the
:r:list:`users`.
The RTEMS Project's Windows tools are native Windows executables giving the
user the best possible experience on Windows. Native Windows programs use the
standard Windows DLLs and paths. Integration with standard Windows integrated
development tools such as editors is straight forward. POSIX emulation
environments such as Cygwin and the MSYS2 shell have special executables that
require a POSIX emulation DLL and these emulation DLLs add an extra layer of
complexity as well as a performance over-head. The RTEMS Project uses these
POSIX emulation shells to run configure scripts that come with various open
source packages such as `gcc` so they form an important and valued part of the
environment we describe here. The output of this procedure forms the tools you
use during your application development and they do not depend the emulation
DLLs.
The performance of the compiler is as good as you can have on Windows and the
performance compiling a single file will be similar to that on a host like
Linux or FreeBSD given the same hardware. Building the tools from source is
much slower on Windows because POSIX shells and related tools are used and the
POSIX emulation overhead it much much slower than a native POSIX operating
system like Linux and FreeBSD. This overhead is only during the building of the
tools and the RTEMS kernel and if you use a suitable build system that is
native to Windows your application development should be similar to other
operating systems.
Windows path length is limited and can cause problems when building the
tools. The standard Windows API has a ``MAX_PATH`` length of 260
characters. This can effect some of the tools used by RTEMS. It is recommended
you keep the top level directories as short as possible when building the RTEMS
tools and you also keep an eye on the path length when developing your
application. The RTEMS built tools can handle much longer path lengths however
some of the GNU tools such as those in the ``binutils`` package cannot.
POSIX Support
~~~~~~~~~~~~~
Building the RTEMS compilers, debugger, the RTEMS kernel and a number of other
3rd party packages requires a POSIX environment. On Windows you can use Cygwin
or MSYS2. This document focuses on MSYS2. It is smaller than Cygwin and comes
with the Arch Linux package manager ``pacman``.
MSYS2 provides MinGW64 support as well as a POSIX shell called MSYS2. The
MinGW64 compiler and related tools produce 64bit native Windows
executables. The shell is a standard Bourne shell and the MSYS2 environment is
a stripped Cygwin shell with enough support to run the various ``configure``
scripts needed to build the RTEMS tools and the RTEMS kernel.
MSYS2 is built around the ``pacman`` packing tool. This makes MSYS2 a
distribution and that is a welcome feature on Windows. You get a powerful tool
to manage your development environment on Windows.
Python
~~~~~~
We need Python to build the tools as the RSB is written in Python and we need
suitable Python libraries to link to GDB as RTEMS makes use of GDB's Python
support. This place specific demands on the Python we need installed and
available and MSYS2 provides suitable Python versions we can use. You need to
make sure you have the correct type and version of Python installed.
We cannot use the Python executables created by the Python project (python.org)
as they are built by Microsoft's C (MSC) compiler. Linking the MSC Python
libraries with the MinGW64 executables is not easy and MSYS provided us with a
simple solution so we do not support this.
MSYS2 provides two types and versions of Python executables, MinGW and MSYS and
Python version 2 and 3. For Windows we need the MinGW executable so we have
suitables libraries and we have to have Python vrrsion 2 because on Windows GDB
only builds with Python2.
You also need to install the MSYS version of Python along with the MinGW64
Python2 package. The MSYS Python is version 3 and the RSB can support version 2
and 3 of Python and it helps handle some of the long paths building GCC can
generate.
Installing MSYS2
~~~~~~~~~~~~~~~~
MSYS2 is installed on a new machine using the MSYS2 installer found on
https://msys2.github.io/. Please select the ``x86_64`` variant for 64bit
support. Run the installer followin the 7 steps listed on the page.
MSYS2 uses the ``pacman`` package manager. The Arch Linux project has detailed
documentation on how to use ``pacman``. What is shown here is a just few
examples of what you can do.
Open a 64bit MSYS shell from the Start Menu:
.. figure:: msys2-minw64-start-menu.png
:width: 50%
:align: center
:alt: MSYS2 64bit Shell Start Menu
The packages we require are:
* python
* mingw-w64-x86_64-python2
* mingw-w64-x86_64-gcc
* git
* bison
* cvs
* diffutils
* make
* patch
* tar
* texinfo
* unzip
.. note::
The actual output provided may vary due to changes in the dependent packages
or newer package versions.
Install the packages using ``pacman``:
.. code-block:: shell
~
$ pacman -S python mingw-w64-x86_64-python2 mingw-w64-x86_64-gcc \
> bison cvs diffutils git make patch tar texinfo unzip
resolving dependencies...
looking for conflicting packages...
Packages (74) db-5.3.28-2 expat-2.1.0-2 gdbm-1.11-3 heimdal-1.5.3-8
libgdbm-1.11-3 mingw-w64-x86_64-binutils-2.26-21
mingw-w64-x86_64-bzip2-1.0.6-5
mingw-w64-x86_64-ca-certificates-20150426-2
mingw-w64-x86_64-crt-git-5.0.0.4627.03684c4-1
mingw-w64-x86_64-expat-2.1.0-6 mingw-w64-x86_64-gcc-libs-5.3.0-2
mingw-w64-x86_64-gdbm-1.11-3 mingw-w64-x86_64-gettext-0.19.6-2
mingw-w64-x86_64-gmp-6.1.0-1
mingw-w64-x86_64-headers-git-5.0.0.4627.53be55d-1
mingw-w64-x86_64-isl-0.15-1 mingw-w64-x86_64-libffi-3.2.1-3
mingw-w64-x86_64-libiconv-1.14-5
mingw-w64-x86_64-libsystre-1.0.1-2
mingw-w64-x86_64-libtasn1-4.7-1
mingw-w64-x86_64-libtre-git-r122.c2f5d13-4
mingw-w64-x86_64-libwinpthread-git-5.0.0.4573.628fdbf-1
mingw-w64-x86_64-mpc-1.0.3-2 mingw-w64-x86_64-mpfr-3.1.3.p0-2
mingw-w64-x86_64-ncurses-6.0.20160220-2
mingw-w64-x86_64-openssl-1.0.2.g-1
mingw-w64-x86_64-p11-kit-0.23.1-3
mingw-w64-x86_64-readline-6.3.008-1 mingw-w64-x86_64-tcl-8.6.5-1
mingw-w64-x86_64-termcap-1.3.1-2 mingw-w64-x86_64-tk-8.6.5-1
mingw-w64-x86_64-windows-default-manifest-6.4-2
mingw-w64-x86_64-winpthreads-git-5.0.0.4573.628fdbf-1
mingw-w64-x86_64-zlib-1.2.8-9 openssh-7.1p2-1 perl-5.22.0-2
perl-Authen-SASL-2.16-2 perl-Convert-BinHex-1.123-2
perl-Encode-Locale-1.04-1 perl-Error-0.17024-1
perl-File-Listing-6.04-2 perl-HTML-Parser-3.71-3
perl-HTML-Tagset-3.20-2 perl-HTTP-Cookies-6.01-2
perl-HTTP-Daemon-6.01-2 perl-HTTP-Date-6.02-2
perl-HTTP-Message-6.06-2 perl-HTTP-Negotiate-6.01-2
perl-IO-Socket-SSL-2.016-1 perl-IO-stringy-2.111-1
perl-LWP-MediaTypes-6.02-2 perl-MIME-tools-5.506-1
perl-MailTools-2.14-1 perl-Net-HTTP-6.09-1
perl-Net-SMTP-SSL-1.02-1 perl-Net-SSLeay-1.70-1
perl-TermReadKey-2.33-1 perl-TimeDate-2.30-2 perl-URI-1.68-1
perl-WWW-RobotRules-6.02-2 perl-libwww-6.13-1 vim-7.4.1468-1
bison-3.0.4-1 cvs-1.11.23-2 diffutils-3.3-3 git-2.7.2-1
make-4.1-4 mingw-w64-x86_64-gcc-5.3.0-2
mingw-w64-x86_64-python2-2.7.11-4 patch-2.7.5-1 python-3.4.3-3
tar-1.28-3 texinfo-6.0-1 unzip-6.0-2
Total Download Size: 114.10 MiB
Total Installed Size: 689.61 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
mingw-w64-x86_64-gm... 477.1 KiB 681K/s 00:01 [#####################] 100%
mingw-w64-x86_64-li... 24.2 KiB 755K/s 00:00 [#####################] 100%
mingw-w64-x86_64-gc... 541.9 KiB 705K/s 00:01 [#####################] 100%
mingw-w64-x86_64-ex... 106.7 KiB 702K/s 00:00 [#####################] 100%
mingw-w64-x86_64-bz... 77.9 KiB 666K/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 600.2 KiB 703K/s 00:01 [#####################] 100%
mingw-w64-x86_64-ge... 3.0 MiB 700K/s 00:04 [#####################] 100%
mingw-w64-x86_64-gd... 151.8 KiB 483K/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 34.5 KiB 705K/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 69.2 KiB 713K/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 9.3 KiB 778K/s 00:00 [#####################] 100%
mingw-w64-x86_64-nc... 1800.5 KiB 701K/s 00:03 [#####################] 100%
mingw-w64-x86_64-li... 171.4 KiB 708K/s 00:00 [#####################] 100%
mingw-w64-x86_64-p1... 193.5 KiB 709K/s 00:00 [#####################] 100%
mingw-w64-x86_64-ca... 382.1 KiB 705K/s 00:01 [#####################] 100%
mingw-w64-x86_64-zl... 148.6 KiB 704K/s 00:00 [#####################] 100%
mingw-w64-x86_64-op... 3.3 MiB 624K/s 00:05 [#####################] 100%
mingw-w64-x86_64-te... 12.6 KiB 76.7K/s 00:00 [#####################] 100%
mingw-w64-x86_64-re... 327.4 KiB 277K/s 00:01 [#####################] 100%
mingw-w64-x86_64-tc... 2.9 MiB 699K/s 00:04 [#####################] 100%
mingw-w64-x86_64-tk... 1869.2 KiB 703K/s 00:03 [#####################] 100%
mingw-w64-x86_64-py... 10.9 MiB 699K/s 00:16 [#####################] 100%
mingw-w64-x86_64-bi... 12.7 MiB 688K/s 00:19 [#####################] 100%
mingw-w64-x86_64-he... 5.0 MiB 645K/s 00:08 [#####################] 100%
mingw-w64-x86_64-cr... 2.6 MiB 701K/s 00:04 [#####################] 100%
mingw-w64-x86_64-is... 524.3 KiB 684K/s 00:01 [#####################] 100%
mingw-w64-x86_64-mp... 265.2 KiB 705K/s 00:00 [#####################] 100%
mingw-w64-x86_64-mp... 62.3 KiB 82.9K/s 00:01 [#####################] 100%
mingw-w64-x86_64-wi... 1484.0 B 0.00B/s 00:00 [#####################] 100%
mingw-w64-x86_64-wi... 33.2 KiB 346K/s 00:00 [#####################] 100%
mingw-w64-x86_64-gc... 25.1 MiB 701K/s 00:37 [#####################] 100%
python-3.4.3-3-x86_64 12.1 MiB 700K/s 00:18 [#####################] 100%
bison-3.0.4-1-x86_64 1045.1 KiB 703K/s 00:01 [#####################] 100%
heimdal-1.5.3-8-x86_64 543.7 KiB 703K/s 00:01 [#####################] 100%
cvs-1.11.23-2-x86_64 508.2 KiB 388K/s 00:01 [#####################] 100%
diffutils-3.3-3-x86_64 265.7 KiB 478K/s 00:01 [#####################] 100%
expat-2.1.0-2-x86_64 13.1 KiB 817K/s 00:00 [#####################] 100%
vim-7.4.1468-1-x86_64 6.1 MiB 700K/s 00:09 [#####################] 100%
openssh-7.1p2-1-x86_64 653.4 KiB 703K/s 00:01 [#####################] 100%
db-5.3.28-2-x86_64 41.7 KiB 719K/s 00:00 [#####################] 100%
libgdbm-1.11-3-x86_64 20.4 KiB 754K/s 00:00 [#####################] 100%
gdbm-1.11-3-x86_64 108.5 KiB 704K/s 00:00 [#####################] 100%
perl-5.22.0-2-x86_64 12.4 MiB 702K/s 00:18 [#####################] 100%
perl-Error-0.17024-... 17.1 KiB 742K/s 00:00 [#####################] 100%
perl-Authen-SASL-2.... 42.4 KiB 731K/s 00:00 [#####################] 100%
perl-Encode-Locale-... 9.7 KiB 745K/s 00:00 [#####################] 100%
perl-HTTP-Date-6.02... 8.6 KiB 784K/s 00:00 [#####################] 100%
perl-File-Listing-6... 7.7 KiB 769K/s 00:00 [#####################] 100%
perl-HTML-Tagset-3.... 10.3 KiB 732K/s 00:00 [#####################] 100%
perl-HTML-Parser-3.... 76.9 KiB 516K/s 00:00 [#####################] 100%
perl-LWP-MediaTypes... 18.0 KiB 752K/s 00:00 [#####################] 100%
perl-URI-1.68-1-any 75.6 KiB 609K/s 00:00 [#####################] 100%
perl-HTTP-Message-6... 71.3 KiB 625K/s 00:00 [#####################] 100%
perl-HTTP-Cookies-6... 20.4 KiB 499K/s 00:00 [#####################] 100%
perl-HTTP-Daemon-6.... 14.2 KiB 749K/s 00:00 [#####################] 100%
perl-HTTP-Negotiate... 11.4 KiB 817K/s 00:00 [#####################] 100%
perl-Net-HTTP-6.09-... 19.8 KiB 732K/s 00:00 [#####################] 100%
perl-WWW-RobotRules... 12.2 KiB 766K/s 00:00 [#####################] 100%
perl-libwww-6.13-1-any 122.2 KiB 661K/s 00:00 [#####################] 100%
perl-TimeDate-2.30-... 35.9 KiB 718K/s 00:00 [#####################] 100%
perl-MailTools-2.14... 58.4 KiB 712K/s 00:00 [#####################] 100%
perl-IO-stringy-2.1... 52.6 KiB 721K/s 00:00 [#####################] 100%
perl-Convert-BinHex... 30.1 KiB 733K/s 00:00 [#####################] 100%
perl-MIME-tools-5.5... 180.4 KiB 705K/s 00:00 [#####################] 100%
perl-Net-SSLeay-1.7... 191.2 KiB 708K/s 00:00 [#####################] 100%
perl-IO-Socket-SSL-... 112.5 KiB 703K/s 00:00 [#####################] 100%
perl-Net-SMTP-SSL-1... 3.5 KiB 881K/s 00:00 [#####################] 100%
perl-TermReadKey-2.... 20.9 KiB 745K/s 00:00 [#####################] 100%
git-2.7.2-1-x86_64 3.6 MiB 702K/s 00:05 [#####################] 100%
make-4.1-4-x86_64 387.0 KiB 671K/s 00:01 [#####################] 100%
patch-2.7.5-1-x86_64 75.9 KiB 684K/s 00:00 [#####################] 100%
tar-1.28-3-x86_64 671.9 KiB 379K/s 00:02 [#####################] 100%
texinfo-6.0-1-x86_64 992.7 KiB 625K/s 00:02 [#####################] 100%
unzip-6.0-2-x86_64 93.1 KiB 705K/s 00:00 [#####################] 100%
(74/74) checking keys in keyring [#####################] 100%
(74/74) checking package integrity [#####################] 100%
(74/74) loading package files [#####################] 100%
(74/74) checking for file conflicts [#####################] 100%
(74/74) checking available disk space [#####################] 100%
:: Processing package changes...
( 1/74) installing python [#####################] 100%
( 2/74) installing mingw-w64-x86_64-gmp [#####################] 100%
( 3/74) installing mingw-w64-x86_64-libwinpthr... [#####################] 100%
( 4/74) installing mingw-w64-x86_64-gcc-libs [#####################] 100%
( 5/74) installing mingw-w64-x86_64-expat [#####################] 100%
( 6/74) installing mingw-w64-x86_64-bzip2 [#####################] 100%
( 7/74) installing mingw-w64-x86_64-libiconv [#####################] 100%
( 8/74) installing mingw-w64-x86_64-gettext [#####################] 100%
( 9/74) installing mingw-w64-x86_64-gdbm [#####################] 100%
(10/74) installing mingw-w64-x86_64-libffi [#####################] 100%
(11/74) installing mingw-w64-x86_64-libtre-git [#####################] 100%
(12/74) installing mingw-w64-x86_64-libsystre [#####################] 100%
(13/74) installing mingw-w64-x86_64-ncurses [#####################] 100%
(14/74) installing mingw-w64-x86_64-libtasn1 [#####################] 100%
(15/74) installing mingw-w64-x86_64-p11-kit [#####################] 100%
(16/74) installing mingw-w64-x86_64-ca-certifi... [#####################] 100%
(17/74) installing mingw-w64-x86_64-zlib [#####################] 100%
(18/74) installing mingw-w64-x86_64-openssl [#####################] 100%
(19/74) installing mingw-w64-x86_64-termcap [#####################] 100%
(20/74) installing mingw-w64-x86_64-readline [#####################] 100%
(21/74) installing mingw-w64-x86_64-tcl [#####################] 100%
(22/74) installing mingw-w64-x86_64-tk [#####################] 100%
(23/74) installing mingw-w64-x86_64-python2 [#####################] 100%
(24/74) installing mingw-w64-x86_64-binutils [#####################] 100%
(25/74) installing mingw-w64-x86_64-headers-git [#####################] 100%
(26/74) installing mingw-w64-x86_64-crt-git [#####################] 100%
(27/74) installing mingw-w64-x86_64-isl [#####################] 100%
(28/74) installing mingw-w64-x86_64-mpfr [#####################] 100%
(29/74) installing mingw-w64-x86_64-mpc [#####################] 100%
(30/74) installing mingw-w64-x86_64-windows-de... [#####################] 100%
(31/74) installing mingw-w64-x86_64-winpthread... [#####################] 100%
(32/74) installing mingw-w64-x86_64-gcc [#####################] 100%
(33/74) installing bison [#####################] 100%
(34/74) installing heimdal [#####################] 100%
(35/74) installing cvs [#####################] 100%
(36/74) installing diffutils [#####################] 100%
(37/74) installing expat [#####################] 100%
(38/74) installing vim [#####################] 100%
(39/74) installing openssh [#####################] 100%
(40/74) installing db [#####################] 100%
(41/74) installing libgdbm [#####################] 100%
(42/74) installing gdbm [#####################] 100%
(43/74) installing perl [#####################] 100%
(44/74) installing perl-Error [#####################] 100%
(45/74) installing perl-Authen-SASL [#####################] 100%
(46/74) installing perl-Encode-Locale [#####################] 100%
(47/74) installing perl-HTTP-Date [#####################] 100%
(48/74) installing perl-File-Listing [#####################] 100%
(49/74) installing perl-HTML-Tagset [#####################] 100%
(50/74) installing perl-HTML-Parser [#####################] 100%
(51/74) installing perl-LWP-MediaTypes [#####################] 100%
(52/74) installing perl-URI [#####################] 100%
(53/74) installing perl-HTTP-Message [#####################] 100%
(54/74) installing perl-HTTP-Cookies [#####################] 100%
(55/74) installing perl-HTTP-Daemon [#####################] 100%
(56/74) installing perl-HTTP-Negotiate [#####################] 100%
(57/74) installing perl-Net-HTTP [#####################] 100%
(58/74) installing perl-WWW-RobotRules [#####################] 100%
(59/74) installing perl-libwww [#####################] 100%
Optional dependencies for perl-libwww
perl-LWP-Protocol-HTTPS: for https:// url schemes
(60/74) installing perl-TimeDate [#####################] 100%
(61/74) installing perl-MailTools [#####################] 100%
(62/74) installing perl-IO-stringy [#####################] 100%
(63/74) installing perl-Convert-BinHex [#####################] 100%
module test... pass.
(64/74) installing perl-MIME-tools [#####################] 100%
(65/74) installing perl-Net-SSLeay [#####################] 100%
(66/74) installing perl-IO-Socket-SSL [#####################] 100%
(67/74) installing perl-Net-SMTP-SSL [#####################] 100%
(68/74) installing perl-TermReadKey [#####################] 100%
(69/74) installing git [#####################] 100%
Optional dependencies for git
python2: various helper scripts
subversion: git svn
(70/74) installing make [#####################] 100%
(71/74) installing patch [#####################] 100%
Optional dependencies for patch
ed: for patch -e functionality
(72/74) installing tar [#####################] 100%
(73/74) installing texinfo [#####################] 100%
(74/74) installing unzip [#####################] 100%
Building the Tools
~~~~~~~~~~~~~~~~~~
Create a workspace for RTEMS using the following shell command:
.. sidebar:: *Creating Tool Archives*
Add ``--bset-tar-file`` to the ``sb-set-builder`` command line to create
tar files of the built package set.
.. code-block:: shell
~
$ mkdir -p /c/opt/rtems
The ``/c`` path is an internal MSYS2 mount point of the ``C:`` drive. The
command creates the RTEMS work space on the ``C:`` drive. If you wish to use
another drive please subsitute ``/c`` with your drive letter.
We build and install all RTEMS packages under the `prefix` we just created. Change to that
directory and get a copy of the RSB:
.. code-block:: shell
~
$ cd /c/opt/rtems
/c/opt/rtems
$ git clone git://git.rtems.org/rtems-source-builder.git rsb
Cloning into 'rsb'...
remote: Counting objects: 5716, done.
remote: Compressing objects: 100% (2183/2183), done.
remote: Total 5716 (delta 3919), reused 5071 (delta 3494)
Receiving objects: 100% (5716/5716), 2.46 MiB | 656.00 KiB/s, done.
Resolving deltas: 100% (3919/3919), done.
Checking connectivity... done.
Checking out files: 100% (630/630), done.
/c/opt/rtems
$ cd rsb
We are building RTEMS 4.11 tools so select the *4.11* branch:
.. code-block:: shell
/c/opt/rtems/rsb
$ git checkout 4.11
Branch 4.11 set up to track remote branch 4.11 from origin.
Switched to a new branch '4.11'
/c/opt/rtems/rsb
$
Check the RSB has a valid environment:
.. code-block:: shell
/c/opt/rtems/rsb
$ cd rtems
/c/opt/rtems/rsb/rtems
$ ../source-builder/sb-check
RTEMS Source Builder - Check, 4.11 (01ac76f2f90f)
Environment is ok
/c/opt/rtems/rsb/rtems
$
To build a set of RTEMS tools for the Intel ``i386`` architecture:
.. code-block:: shell
/c/opt/rtems/rsb/rtems
$ ../source-builder/sb-set-builder --prefix=/c/opt/rtems/4.11 4.11/rtems-i386
RTEMS Source Builder - Set Builder, 4.11 (01ac76f2f90f)
Build Set: 4.11/rtems-i386
Build Set: 4.11/rtems-autotools.bset
Build Set: 4.11/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-w64-mingw32-1
Creating source directory: sources
download: ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
building: autoconf-2.69-x86_64-w64-mingw32-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-w64-mingw32-1
download: ftp://ftp.gnu.org/gnu/automake/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
building: automake-1.12.6-x86_64-w64-mingw32-1
cleaning: autoconf-2.69-x86_64-w64-mingw32-1
cleaning: automake-1.12.6-x86_64-w64-mingw32-1
Build Set: Time 0:00:42.515625
Build Set: 4.11/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-w64-mingw32-1
building: autoconf-2.69-x86_64-w64-mingw32-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-w64-mingw32-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-w64-mingw32-1
building: automake-1.12.6-x86_64-w64-mingw32-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-w64-mingw32-1.xml
tarball: tar/rtems-4.11-autotools-x86_64-w64-mingw32-1.tar.bz2
installing: autoconf-2.69-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: automake-1.12.6-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
cleaning: autoconf-2.69-x86_64-w64-mingw32-1
cleaning: automake-1.12.6-x86_64-w64-mingw32-1
Build Set: Time 0:00:37.718750
Build Set: Time 0:01:20.234375
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-w64-mingw32-1
download: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
redirect: http://iweb.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
building: expat-2.1.0-x86_64-w64-mingw32-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-w64-mingw32-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-w64-mingw32-1.xml
config: tools/rtems-binutils-2.24-1.cfg
package: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1
download: ftp://ftp.gnu.org/gnu/binutils/binutils-2.24.tar.bz2 -> sources/binutils-2.24.tar.bz2
downloading: sources/binutils-2.24.tar.bz2 - 21.7MB of 21.7MB (100%)
building: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1
reporting: tools/rtems-binutils-2.24-1.cfg -> i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-binutils-2.24-1.cfg -> i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1.xml
config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg
package: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1
download: ftp://ftp.gnu.org/gnu/gcc/gcc-4.9.3/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2
downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%)
download: ftp://sourceware.org/pub/newlib/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz
downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%)
download: http://www.mpfr.org/mpfr-3.0.1/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2
downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%)
download: http://www.multiprecision.org/mpc/download/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz
downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%)
download: ftp://ftp.gnu.org/gnu/gmp/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2
downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%)
building: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1
reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1.xml
config: tools/rtems-gdb-7.9-1.cfg
package: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1
download: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
download: https://git.rtems.org/rtems-tools/plain/tools/4.11/gdb/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
download: https://git.rtems.org/rtems-tools/plain/tools/4.11/gdb/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
building: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1
reporting: tools/rtems-gdb-7.9-1.cfg ->
i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-gdb-7.9-1.cfg ->
i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1.xml
config: tools/rtems-tools-4.11-1.cfg
package: rtems-tools-4.11-1
Creating source directory: sources/git
git: clone: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
git: reset: git://git.rtems.org/rtems-tools.git
git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
git: checkout: git://git.rtems.org/rtems-tools.git => 4.11
git: pull: git://git.rtems.org/rtems-tools.git
building: rtems-tools-4.11-1
reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11-1.txt
reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11-1.xml
config: tools/rtems-kernel-4.11.cfg
installing: expat-2.1.0-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: rtems-tools-4.11-1 -> C:\opt\rtems\4.11
cleaning: expat-2.1.0-x86_64-w64-mingw32-1
cleaning: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1
cleaning: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1
cleaning: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1
cleaning: rtems-tools-4.11-1
Build Set: Time 1:32:58.972919
/c/opt/rtems/rsb/rtems
$
Building the Kernel
~~~~~~~~~~~~~~~~~~~
We can now build the RTEMS kernel using the RTEMS tools we have just
built. First we need to set the path to the tools:
.. code-block:: shell
/c/opt/rtems
$ export PATH=/c/opt/rtems/4.11/bin:$PATH
/c/opt/rtems
$
We currently build RTEMS from the git release branch for 4.11:
.. code-block:: shell
/c/opt/rtems
$ mkdir kernel
/c/opt/rtems
$ cd kernel
/c/opt/rtems/kernel
$ git clone git://git.rtems.org/rtems.git rtems
Cloning into 'rtems'...
remote: Counting objects: 482766, done.
remote: Compressing objects: 100% (88781/88781), done.
remote: Total 482766 (delta 389610), reused 475155 (delta 383437)
Receiving objects: 100% (482766/482766), 69.77 MiB | 697.00 KiB/s, done.
Resolving deltas: 100% (389610/389610), done.
Checking connectivity... done.
Checking out files: 100% (10626/10626), done.
/c/opt/rtems/kernel
$ cd rtems
/c/opt/rtems/kernel/rtems
$ git checkout 4.11
Checking out files: 100% (2553/2553), done.
Branch 4.11 set up to track remote branch 4.11 from origin.
Switched to a new branch '4.11'
/c/opt/rtems/kernel
$
The kernel code cloned from git needs to be `bootstrapped`. Bootstrapping
creates ``autoconf`` and ``automake`` generated files. To bootstrap we first
clean away any files, then generate the pre-install header file lists and
finally we generate the ``autoconf`` and ``automake`` files using the RSB's
bootstrap tool.
.. code-block:: shell
/c/opt/rtems/kernel/rtems
$ ./bootstrap -c
removing automake generated Makefile.in files
removing configure files
removing aclocal.m4 files
/c/opt/rtems/kernel/rtems
$ ./bootstrap -p
Generating ./c/src/ada/preinstall.am
Generating ./c/src/lib/libbsp/arm/altera-cyclone-v/preinstall.am
Generating ./c/src/lib/libbsp/arm/atsam/preinstall.am
Generating ./c/src/lib/libbsp/arm/beagle/preinstall.am
Generating ./c/src/lib/libbsp/arm/csb336/preinstall.am
Generating ./c/src/lib/libbsp/arm/csb337/preinstall.am
Generating ./c/src/lib/libbsp/arm/edb7312/preinstall.am
Generating ./c/src/lib/libbsp/arm/gdbarmsim/preinstall.am
.......
Generating ./cpukit/score/cpu/mips/preinstall.am
Generating ./cpukit/score/cpu/moxie/preinstall.am
Generating ./cpukit/score/cpu/nios2/preinstall.am
Generating ./cpukit/score/cpu/no_cpu/preinstall.am
Generating ./cpukit/score/cpu/or1k/preinstall.am
Generating ./cpukit/score/cpu/powerpc/preinstall.am
Generating ./cpukit/score/cpu/sh/preinstall.am
Generating ./cpukit/score/cpu/sparc/preinstall.am
Generating ./cpukit/score/cpu/sparc64/preinstall.am
Generating ./cpukit/score/cpu/v850/preinstall.am
Generating ./cpukit/score/preinstall.am
Generating ./cpukit/telnetd/preinstall.am
Generating ./cpukit/wrapup/preinstall.am
Generating ./cpukit/zlib/preinstall.am
/c/opt/rtems/kernel/rtems
$ /c/opt/rtems/rsb/source-builder/sb-bootstrap
RTEMS Source Builder - RTEMS Bootstrap, 4.11 (76188ee494dd)
1/139: autoreconf: configure.ac
2/139: autoreconf: c/configure.ac
3/139: autoreconf: c/src/configure.ac
4/139: autoreconf: c/src/ada-tests/configure.ac
5/139: autoreconf: c/src/lib/libbsp/arm/configure.ac
6/139: autoreconf: c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac
7/139: autoreconf: c/src/lib/libbsp/arm/atsam/configure.ac
8/139: autoreconf: c/src/lib/libbsp/arm/beagle/configure.ac
9/139: autoreconf: c/src/lib/libbsp/arm/csb336/configure.ac
10/139: autoreconf: c/src/lib/libbsp/arm/csb337/configure.ac
11/139: autoreconf: c/src/lib/libbsp/arm/edb7312/configure.ac
.......
129/139: autoreconf: testsuites/samples/configure.ac
130/139: autoreconf: testsuites/smptests/configure.ac
131/139: autoreconf: testsuites/sptests/configure.ac
132/139: autoreconf: testsuites/tmtests/configure.ac
133/139: autoreconf: testsuites/tools/configure.ac
134/139: autoreconf: testsuites/tools/generic/configure.ac
135/139: autoreconf: tools/build/configure.ac
136/139: autoreconf: tools/cpu/configure.ac
137/139: autoreconf: tools/cpu/generic/configure.ac
138/139: autoreconf: tools/cpu/nios2/configure.ac
139/139: autoreconf: tools/cpu/sh/configure.ac
Bootstrap time: 0:20:38.759766
/c/opt/rtems/kernel/rtems
$
We will build the RTEMS kernel for the ``i386`` target and the ``pc686``
BSP. You can check the available BSPs by running the ``rtems-bsps`` command
found in the to directory of the RTEMS kernel source. We build the Board
Support Package (BSP) outside the kernel source tree:
.. code-block:: shell
/c/opt/rtems/kernel/rtems
$ cd ..
/c/opt/rtems/kernel
$ mkdir pc686
/c/opt/rtems/kernel
$ cd pc686
/c/opt/rtems/kernel/pc686
$
Configure the RTEMS kernel to build ``pc686`` BSP for the ``i386`` target with
netwoeking disabled, We will build the externel libBSD stack later:
.. code-block:: shell
/c/opt/rtems/kernel/pc686
$ /c/opt/rtems/kernel/rtems/configure --prefix=/c/opt/rtems/4.11 \
--target=i386-rtems4.11 --disable-networking --enable-rtemsbsp=pc686
checking for gmake... no
checking for make... make
checking for RTEMS Version... 4.11.99.0
checking build system type... x86_64-pc-mingw64
checking host system type... x86_64-pc-mingw64
checking target system type... i386-pc-rtems4.11
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking that generated files are newer than configure... done
configure: creating ./config.status
configure: configuring in ./tools/build
.......
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
target architecture: i386.
available BSPs: pc686.
'make all' will build the following BSPs: pc686.
other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."'
config.status: creating Makefile
/c/opt/rtems/kernel/pc686
$
Build the kernel:
.. code-block:: shell
/c/opt/rtems/kernel/pc686
$ make
Making all in tools/build
make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build'
make all-am
make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build'
gcc -DHAVE_CONFIG_H -I. -I/c/opt/rtems/kernel/rtems/tools/build -g -O2 -MT
cklength.o -MD -MP -MF .deps/cklength.Tpo -c -o cklength.o
/c/opt/rtems/kernel/rtems/tools/build/cklength.c
gcc -DHAVE_CONFIG_H -I. -I/c/opt/rtems/kernel/rtems/tools/build -g -O2 -MT
eolstrip.o -MD -MP -MF .deps/eolstrip.Tpo -c -o eolstrip.o
/c/opt/rtems/kernel/rtems/tools/build/eolstrip.c
..........
i386-rtems4.11-objcopy -O binary nsecs.nxe nsecs.bin
../../../../../pc686/build-tools/bin2boot -v nsecs.ralf 0x00097E00
../../../../../pc686/lib/start16.bin 0x00097C00 0 nsecs.bin 0x00100000 0
header address 0x00097e00, its memory size 0xzx
first image address 0x00097c00, its memory size 0x00000200
second image address 0x00100000, its memory size 0x0003d800
rm -f nsecs.nxe
make[6]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples/nsecs'
make[5]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples'
make[4]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples'
make[4]: Entering directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites'
make[3]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites'
make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686'
make[1]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c'
make[1]: Entering directory '/c/opt/rtems/kernel/pc686'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/c/opt/rtems/kernel/pc686'
/c/opt/rtems/kernel/pc696
$
Install the kernel to our prefix:
.. code-block:: shell
/c/opt/rtems/kernel/pc686
$ make install
Making install in tools/build
make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build'
make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build'
/usr/bin/mkdir -p '/c/opt/rtems/4.11/bin'
/usr/bin/install -c cklength.exe eolstrip.exe packhex.exe unhex.exe
rtems-bin2c.exe '/c/opt/rtems/4.11/bin'
/usr/bin/mkdir -p '/c/opt/rtems/4.11/bin'
/usr/bin/install -c install-if-change '/c/opt/rtems/4.11/bin'
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/build'
make[1]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/build'
Making install in tools/cpu
make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu'
Making install in generic
make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic'
make[3]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic'
make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic'
make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu'
make[3]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
..........
make[2]: Entering directory '/c/opt/rtems/kernel/pc686'
make[2]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/c/opt/rtems/4.11/make'
/usr/bin/install -c -m 644 /c/opt/rtems/kernel/rtems/make/main.cfg
/c/opt/rtems/kernel/rtems/make/leaf.cfg '/c/opt/rtems/4.11/make'
/usr/bin/mkdir -p '/c/opt/rtems/4.11/share/rtems4.11/make/Templates'
/usr/bin/install -c -m 644
/c/opt/rtems/kernel/rtems/make/Templates/Makefile.dir
/c/opt/rtems/kernel/rtems/make/Templates/Makefile.leaf
/c/opt/rtems/kernel/rtems/make/Templates/Makefile.lib
'/c/opt/rtems/4.11/share/rtems4.11/make/Templates'
/usr/bin/mkdir -p '/c/opt/rtems/4.11/make/custom'
/usr/bin/install -c -m 644 /c/opt/rtems/kernel/rtems/make/custom/default.cfg
'/c/opt/rtems/4.11/make/custom'
make[2]: Leaving directory '/c/opt/rtems/kernel/pc686'
make[1]: Leaving directory '/c/opt/rtems/kernel/pc686'
/c/opt/rtems/kernel/pc686
$
Building the LibBSD
~~~~~~~~~~~~~~~~~~~
The RTEMS BSD Library or libBSD as it is also know is a package of FreeBSD code
ported to RTEMS. It provides a number of advantanced services including a
networking stack
|