.. comment SPDX-License-Identifier: CC-BY-SA-4.0
.. COMMENT: COPYRIGHT (c) 1988-2008.
.. COMMENT: On-Line Applications Research Corporation (OAR).
.. COMMENT: All rights reserved.
Signal Manager
##############
.. index:: signals
Introduction
============
The signal manager provides the capabilities required for asynchronous
communication. The directives provided by the signal manager are:
- rtems_signal_catch_ - Establish an ASR
- rtems_signal_send_ - Send signal set to a task
Background
==========
Signal Manager Definitions
--------------------------
.. index:: asynchronous signal routine
.. index:: ASR
The signal manager allows a task to optionally define an asynchronous signal
routine (ASR). An ASR is to a task what an ISR is to an application's set of
tasks. When the processor is interrupted, the execution of an application is
also interrupted and an ISR is given control. Similarly, when a signal is sent
to a task, that task's execution path will be "interrupted" by the ASR.
Sending a signal to a task has no effect on the receiving task's current
execution state.
.. index:: rtems_signal_set
A signal flag is used by a task (or ISR) to inform another task of the
occurrence of a significant situation. Thirty-two signal flags are associated
with each task. A collection of one or more signals is referred to as a signal
set. The data type ``rtems_signal_set`` is used to manipulate signal sets.
A signal set is posted when it is directed (or sent) to a task. A pending
signal is a signal that has been sent to a task with a valid ASR, but has not
been processed by that task's ASR.
A Comparison of ASRs and ISRs
-----------------------------
.. index:: ASR vs. ISR
.. index:: ISR vs. ASR
The format of an ASR is similar to that of an ISR with the following
exceptions:
- ISRs are scheduled by the processor hardware. ASRs are scheduled by RTEMS.
- ISRs do not execute in the context of a task and may invoke only a subset of
directives. ASRs execute in the context of a task and may execute any
directive.
- When an ISR is invoked, it is passed the vector number as its argument. When
an ASR is invoked, it is passed the signal set as its argument.
- An ASR has a task mode which can be different from that of the task. An ISR
does not execute as a task and, as a result, does not have a task mode.
Building a Signal Set
---------------------
.. index:: signal set, building
A signal set is built by a bitwise OR of the desired signals. The set of valid
signals is ``RTEMS_SIGNAL_0`` through ``RTEMS_SIGNAL_31``. If a signal is not
explicitly specified in the signal set, then it is not present. Signal values
are specifically designed to be mutually exclusive, therefore bitwise OR and
addition operations are equivalent as long as each signal appears exactly once
in the component list.
This example demonstrates the signal parameter used when sending the signal set
consisting of ``RTEMS_SIGNAL_6``, ``RTEMS_SIGNAL_15``, and ``RTEMS_SIGNAL_31``.
The signal parameter provided to the ``rtems_signal_send`` directive should be
``RTEMS_SIGNAL_6 | RTEMS_SIGNAL_15 | RTEMS_SIGNAL_31``.
Building an ASR Mode
--------------------
.. index:: ASR mode, building
In general, an ASR's mode is built by a bitwise OR of the desired mode
components. The set of valid mode components is the same as those allowed with
the task_create and task_mode directives. A complete list of mode options is
provided in the following table:
.. list-table::
:class: rtems-table
* - ``RTEMS_PREEMPT``
- is masked by ``RTEMS_PREEMPT_MASK`` and enables preemption
* - ``RTEMS_NO_PREEMPT``
- is masked by ``RTEMS_PREEMPT_MASK`` and disables preemption
* - ``RTEMS_NO_TIMESLICE``
- is masked by ``RTEMS_TIMESLICE_MASK`` and disables timeslicing
* - ``RTEMS_TIMESLICE``
- is masked by ``RTEMS_TIMESLICE_MASK`` and enables timeslicing
* - ``RTEMS_ASR``
- is masked by ``RTEMS_ASR_MASK`` and enables ASR processing
* - ``RTEMS_NO_ASR``
- is masked by ``RTEMS_ASR_MASK`` and disables ASR processing
* - ``RTEMS_INTERRUPT_LEVEL(0)``
- is masked by ``RTEMS_INTERRUPT_MASK`` and enables all interrupts
* - ``RTEMS_INTERRUPT_LEVEL(n)``
- is masked by ``RTEMS_INTERRUPT_MASK`` and sets interrupts level n
Mode values are specifically designed to be mutually exclusive, therefore
bitwise OR and addition operations are equivalent as long as each mode appears
exactly once in the component list. A mode component listed as a default is
not required to appear in the mode list, although it is a good programming
practice to specify default components. If all defaults are desired, the mode
``DEFAULT_MODES`` should be specified on this call.
This example demonstrates the mode parameter used with the
``rtems_signal_catch`` to establish an ASR which executes at interrupt level
three and is non-preemptible. The mode should be set to
``RTEMS_INTERRUPT_LEVEL(3) | RTEMS_NO_PREEMPT`` to indicate the desired
processor mode and interrupt level.
Operations
==========
Establishing an ASR
-------------------
The ``rtems_signal_catch`` directive establishes an ASR for the calling task.
The address of the ASR and its execution mode are specified to this directive.
The ASR's mode is distinct from the task's mode. For example, the task may
allow preemption, while that task's ASR may have preemption disabled. Until a
task calls ``rtems_signal_catch`` the first time, its ASR is invalid, and no
signal sets can be sent to the task.
A task may invalidate its ASR and discard all pending signals by calling
``rtems_signal_catch`` with a value of NULL for the ASR's address. When a
task's ASR is invalid, new signal sets sent to this task are discarded.
A task may disable ASR processing (``RTEMS_NO_ASR``) via the task_mode
directive. When a task's ASR is disabled, the signals sent to it are left
pending to be processed later when the ASR is enabled.
Any directive that can be called from a task can also be called from an ASR. A
task is only allowed one active ASR. Thus, each call to ``rtems_signal_catch``
replaces the previous one.
Normally, signal processing is disabled for the ASR's execution mode, but if
signal processing is enabled for the ASR, the ASR must be reentrant.
Sending a Signal Set
--------------------
The ``rtems_signal_send`` directive allows both tasks and ISRs to send signals
to a target task. The target task and a set of signals are specified to the
``rtems_signal_send`` directive. The sending of a signal to a task has no
effect on the execution state of that task. If the task is not the currently
running task, then the signals are left pending and processed by the task's ASR
the next time the task is dispatched to run. The ASR is executed immediately
before the task is dispatched. If the currently running task sends a signal to
itself or is sent a signal from an ISR, its ASR is immediately dispatched to
run provided signal processing is enabled.
If an ASR with signals enabled is preempted by another task or an ISR and a new
signal set is sent, then a new copy of the ASR will be invoked, nesting the
preempted ASR. Upon completion of processing the new signal set, control will
return to the preempted ASR. In this situation, the ASR must be reentrant.
Like events, identical signals sent to a task are not queued. In other words,
sending the same signal multiple times to a task (without any intermediate
signal processing occurring for the task), has the same result as sending that
signal to that task once.
Processing an ASR
-----------------
Asynchronous signals were designed to provide the capability to generate
software interrupts. The processing of software interrupts parallels that of
hardware interrupts. As a result, the differences between the formats of ASRs
and ISRs is limited to the meaning of the single argument passed to an ASR.
The ASR should have the following calling sequence and adhere to C calling
conventions:
.. index:: rtems_asr
.. code-block:: c
rtems_asr user_routine(
rtems_signal_set signals
);
When the ASR returns to RTEMS the mode and execution path of the interrupted
task (or ASR) is restored to the context prior to entering the ASR.
Directives
==========
This section details the signal manager's directives. A subsection is
dedicated to each of this manager's directives and describes the calling
sequence, related constants, usage, and status codes.
.. _rtems_signal_catch:
SIGNAL_CATCH - Establish an ASR
-------------------------------
.. index:: establish an ASR
.. index:: install an ASR
**CALLING SEQUENCE:**
.. index:: rtems_signal_catch
.. code-block:: c
rtems_status_code rtems_signal_catch(
rtems_asr_entry asr_handler,
rtems_mode mode
);
**DIRECTIVE STATUS CODES:**
.. list-table::
:class: rtems-table
* - ``RTEMS_SUCCESSFUL``
- always successful
**DESCRIPTION:**
This directive establishes an asynchronous signal routine (ASR) for the calling
task. The asr_handler parameter specifies the entry point of the ASR. If
asr_handler is NULL, the ASR for the calling task is invalidated and all
pending signals are cleared. Any signals sent to a task with an invalid ASR
are discarded. The mode parameter specifies the execution mode for the ASR.
This execution mode supersedes the task's execution mode while the ASR is
executing.
**NOTES:**
This directive will not cause the calling task to be preempted.
The following task mode constants are defined by RTEMS:
.. list-table::
:class: rtems-table
* - ``RTEMS_PREEMPT``
- is masked by ``RTEMS_PREEMPT_MASK`` and enables preemption
* - ``RTEMS_NO_PREEMPT``
- is masked by ``RTEMS_PREEMPT_MASK`` and disables preemption
* - ``RTEMS_NO_TIMESLICE``
- is masked by ``RTEMS_TIMESLICE_MASK`` and disables timeslicing
* - ``RTEMS_TIMESLICE``
- is masked by ``RTEMS_TIMESLICE_MASK`` and enables timeslicing
* - ``RTEMS_ASR``
- is masked by ``RTEMS_ASR_MASK`` and enables ASR processing
* - ``RTEMS_NO_ASR``
- is masked by ``RTEMS_ASR_MASK`` and disables ASR processing
* - ``RTEMS_INTERRUPT_LEVEL(0)``
- is masked by ``RTEMS_INTERRUPT_MASK`` and enables all interrupts
* - ``RTEMS_INTERRUPT_LEVEL(n)``
- is masked by ``RTEMS_INTERRUPT_MASK`` and sets interrupts level n
.. _rtems_signal_send:
SIGNAL_SEND - Send signal set to a task
---------------------------------------
.. index:: send signal set
**CALLING SEQUENCE:**
.. index:: rtems_signal_send
.. code-block:: c
rtems_status_code rtems_signal_send(
rtems_id id,
rtems_signal_set signal_set
);
**DIRECTIVE STATUS CODES:**
.. list-table::
:class: rtems-table
* - ``RTEMS_SUCCESSFUL``
- signal sent successfully
* - ``RTEMS_INVALID_ID``
- task id invalid
* - ``RTEMS_INVALID_NUMBER``
- empty signal set
* - ``RTEMS_NOT_DEFINED``
- ASR invalid
**DESCRIPTION:**
This directive sends a signal set to the task specified in id. The signal_set
parameter contains the signal set to be sent to the task.
If a caller sends a signal set to a task with an invalid ASR, then an error
code is returned to the caller. If a caller sends a signal set to a task whose
ASR is valid but disabled, then the signal set will be caught and left pending
for the ASR to process when it is enabled. If a caller sends a signal set to a
task with an ASR that is both valid and enabled, then the signal set is caught
and the ASR will execute the next time the task is dispatched to run.
**NOTES:**
Sending a signal set to a task has no effect on that task's state. If a signal
set is sent to a blocked task, then the task will remain blocked and the
signals will be processed when the task becomes the running task.
Sending a signal set to a global task which does not reside on the local node
will generate a request telling the remote node to send the signal set to the
specified task.
