.. SPDX-License-Identifier: CC-BY-SA-4.0
.. Copyright (C) 1988, 2008 On-Line Applications Research Corporation (OAR)
Initialization Manager
**********************
Introduction
============
The Initialization Manager is responsible for initializing the Board Support
Package, RTEMS, device drivers, the root filesystem and the application. The
:ref:`Fatal Error Manager <fatal_error_manager>` is responsible for the system
shutdown.
The Initialization Manager provides only one directive:
- rtems_initialize_executive_ - Initialize RTEMS
Background
==========
.. index:: initialization tasks
Initialization Tasks
--------------------
Initialization task(s) are the mechanism by which RTEMS transfers initial
control to the user's application. Initialization tasks differ from other
application tasks in that they are defined in the User Initialization Tasks
Table and automatically created and started by RTEMS as part of its
initialization sequence. Since the initialization tasks are scheduled using
the same algorithm as all other RTEMS tasks, they must be configured at a
priority and mode which will ensure that they will complete execution before
other application tasks execute. Although there is no upper limit on the
number of initialization tasks, an application is required to define at least
one.
A typical initialization task will create and start the static set of
application tasks. It may also create any other objects used by the
application. Initialization tasks which only perform initialization should
delete themselves upon completion to free resources for other tasks.
Initialization tasks may transform themselves into a "normal" application task.
This transformation typically involves changing priority and execution mode.
RTEMS does not automatically delete the initialization tasks.
The Idle Task
-------------
The Idle Task is the lowest priority task in a system and executes only when no
other task is ready to execute. The default implementation of this task
consists of an infinite loop. RTEMS allows the Idle Task body to be replaced by
a CPU specific implementation, a BSP specific implementation or an application
specific implementation.
The Idle Task is preemptible and *WILL* be preempted when any other task is
made ready to execute. This characteristic is critical to the overall behavior
of any application.
Initialization Manager Failure
------------------------------
System initialization errors are fatal. See :ref:`internal_errors`.
Operations
==========
Initializing RTEMS
------------------
The Initialization Manager :c:func:`rtems_initialize_executive()` directives is
called by the :c:func:`boot_card()` routine which is invoked by the Board
Support Package once a basic C run-time environment is set up. This consists
of
- a valid and accessible text section, read-only data, read-write data and
zero-initialized data,
- an initialization stack large enough to initialize the rest of the Board
Support Package, RTEMS and the device drivers,
- all registers and components mandated by Application Binary Interface, and
- disabled interrupts.
The :c:func:`rtems_initialize_executive()` directive uses a system
initialization :ref:`linker set <linker_sets>` to initialize only those parts
of the overall RTEMS feature set that is necessary for a particular
application. Each RTEMS feature used the application may optionally register
an initialization handler. The system initialization API is available via
:samp:`#included <rtems/sysinit.h>`.
A list of all initialization steps follows. Some steps are optional depending
on the requested feature set of the application. The initialization steps are
execute in the order presented here.
RTEMS_SYSINIT_RECORD
Initialization of the event recording is the first initialization step.
This allows to record the further system initialization. This step is
optional and depends on the :ref:`CONFIGURE_RECORD_PER_PROCESSOR_ITEMS`
configuration option.
RTEMS_SYSINIT_BSP_EARLY
The Board Support Package may perform an early platform initialization in
this step. This step is optional.
RTEMS_SYSINIT_MEMORY
The Board Support Package should initialize everything so that calls to
:c:func:`_Memory_Get()` can be made after this step. This step is optional.
RTEMS_SYSINIT_DIRTY_MEMORY
The free memory is dirtied in this step. This step is optional and depends
on the :c:macro:`BSP_DIRTY_MEMORY` BSP option.
RTEMS_SYSINIT_ISR_STACK
The stack checker initializes the ISR stacks in this step. This step is
optional and depends on the :ref:`CONFIGURE_STACK_CHECKER_ENABLED`
configuration option.
RTEMS_SYSINIT_PER_CPU_DATA
The per-CPU data is initialized in this step. This step is mandatory.
RTEMS_SYSINIT_SBRK
The Board Support Package may initialize the :c:func:`sbrk()` support in
this step. This step is optional.
RTEMS_SYSINIT_WORKSPACE
The workspace is initialized in this step. This step is optional and
depends on the application configuration.
RTEMS_SYSINIT_MALLOC
The C program heap is initialized in this step. This step is optional and
depends on the application configuration.
RTEMS_SYSINIT_BSP_START
The Board Support Package should perform a general platform initialization
in this step (e.g. interrupt controller initialization). This step is
mandatory.
RTEMS_SYSINIT_CPU_COUNTER
Initialization of the CPU counter hardware and support functions. The CPU
counter is initialized early to allow its use in the tracing and profiling
of the system initialization sequence. This step is optional and depends
on the application configuration.
RTEMS_SYSINIT_INITIAL_EXTENSIONS
Registers the initial extensions. This step is optional and depends on the
application configuration.
RTEMS_SYSINIT_MP_EARLY
In MPCI configurations, an early MPCI initialization is performed in this
step. This step is mandatory in MPCI configurations.
RTEMS_SYSINIT_DATA_STRUCTURES
This directive is called when the Board Support Package has completed its
basic initialization and allows RTEMS to initialize the application
environment based upon the information in the Configuration Table, User
Initialization Tasks Table, Device Driver Table, User Extension Table,
Multiprocessor Configuration Table, and the Multiprocessor Communications
Interface (MPCI) Table.
RTEMS_SYSINIT_MP
In MPCI configurations, a general MPCI initialization is performed in this
step. This step is mandatory in MPCI configurations.
RTEMS_SYSINIT_USER_EXTENSIONS
Initialization of the User Extensions object class. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_TASKS
Initialization of the Classic Tasks object class. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_TASKS_MP
In MPCI configurations, the Classic Tasks MPCI support is initialized in
this step. This step is optional and depends on the application
configuration.
RTEMS_SYSINIT_CLASSIC_TIMER
Initialization of the Classic Timer object class. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_SIGNAL
Initialization of the Classic Signal support. This step is optional and
depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_SIGNAL_MP
In MPCI configurations, the Classic Signal MPCI support is initialized in
this step. This step is optional and depends on the application
configuration.
RTEMS_SYSINIT_CLASSIC_EVENT
Initialization of the Classic Event support. This step is optional and
depends on the application configuration. This step is only used on MPCI
configurations.
RTEMS_SYSINIT_CLASSIC_EVENT_MP
In MPCI configurations, the Classic Event MPCI support is initialized in
this step. This step is optional and depends on the application
configuration.
RTEMS_SYSINIT_CLASSIC_MESSAGE_QUEUE
Initialization of the Classic Message Queue object class. This step is
optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_SEMAPHORE
Initialization of the Classic Semaphore object class. This step is
optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_SEMAPHORE_MP
In MPCI configurations, the Classic Semaphore MPCI support is initialized
in this step. This step is optional and depends on the application
configuration.
RTEMS_SYSINIT_CLASSIC_PARTITION
Initialization of the Classic Partition object class. This step is
optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_PARTITION_MP
In MPCI configurations, the Classic Partition MPCI support is initialized
in this step. This step is optional and depends on the application
configuration.
RTEMS_SYSINIT_CLASSIC_REGION
Initialization of the Classic Region object class. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_DUAL_PORTED_MEMORY
Initialization of the Classic Dual-Ported Memory object class. This step
is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_RATE_MONOTONIC
Initialization of the Classic Rate-Monotonic object class. This step is
optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_BARRIER
Initialization of the Classic Barrier object class. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_POSIX_SIGNALS
Initialization of the POSIX Signals support. This step is optional and
depends on the application configuration.
RTEMS_SYSINIT_POSIX_THREADS
Initialization of the POSIX Threads object class. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_POSIX_MESSAGE_QUEUE
Initialization of the POSIX Message Queue object class. This step is
optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_SEMAPHORE
Initialization of the POSIX Semaphore object class. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_POSIX_TIMER
Initialization of the POSIX Timer object class. This step is optional and
depends on the application configuration.
RTEMS_SYSINIT_POSIX_SHM
Initialization of the POSIX Shared Memory object class. This step is
optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_KEYS
Initialization of the POSIX Keys object class. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_POSIX_CLEANUP
Initialization of the POSIX Cleanup support. This step is optional and
depends on the application configuration.
RTEMS_SYSINIT_IDLE_THREADS
Initialization of idle threads. This step is mandatory.
RTEMS_SYSINIT_LIBIO
Initialization of IO library. This step is optional and depends on the
application configuration.
RTEMS_SYSINIT_ROOT_FILESYSTEM
Initialization of the root filesystem. This step is optional and depends
on the application configuration.
RTEMS_SYSINIT_DRVMGR
Driver manager initialization. This step is optional and depends on the
application configuration. Only available if the driver manager is
enabled.
RTEMS_SYSINIT_MP_SERVER
In MPCI configurations, the MPCI server is initialized in this step. This
step is mandatory in MPCI configurations.
RTEMS_SYSINIT_BSP_PRE_DRIVERS
Initialization step performed right before device drivers are initialized.
This step is mandatory.
RTEMS_SYSINIT_DRVMGR_LEVEL_1
Driver manager level 1 initialization. This step is optional and depends
on the application configuration. Only available if the driver manager is
enabled.
RTEMS_SYSINIT_DEVICE_DRIVERS
This step initializes all statically configured device drivers and performs
all RTEMS initialization which requires device drivers to be initialized.
This step is mandatory. In a multiprocessor configuration, this service
will initialize the Multiprocessor Communications Interface (MPCI) and
synchronize with the other nodes in the system.
RTEMS_SYSINIT_DRVMGR_LEVEL_2
Driver manager level 2 initialization. This step is optional and depends
on the application configuration. Only available if the driver manager is
enabled.
RTEMS_SYSINIT_DRVMGR_LEVEL_3
Driver manager level 3 initialization. This step is optional and depends
on the application configuration. Only available if the driver manager is
enabled.
RTEMS_SYSINIT_DRVMGR_LEVEL_4
Driver manager level 4 initialization. This step is optional and depends
on the application configuration. Only available if the driver manager is
enabled.
RTEMS_SYSINIT_MP_FINALIZE
Finalize MPCI initialization. This step is mandatory on MPCI
configurations.
RTEMS_SYSINIT_CLASSIC_USER_TASKS
Creates and starts the Classic initialization tasks. This step is optional
and depends on the application configuration.
RTEMS_SYSINIT_POSIX_USER_THREADS
Creates POSIX initialization threads. This step is optional and depends on
the application configuration.
RTEMS_SYSINIT_STD_FILE_DESCRIPTORS
Open the standard input, output and error file descriptors. This step is
optional and depends on the application configuration.
The final action of the :c:func:`rtems_initialize_executive()` directive is to
start multitasking and switch to the highest priority ready thread. RTEMS does
not return to the initialization context and the initialization stack may be
re-used for interrupt processing.
Many of RTEMS actions during initialization are based upon the contents of the
Configuration Table. For more information regarding the format and contents of
this table, please refer to the chapter :ref:`Configuring a System`.
Global Construction
-------------------
The global construction is carried out by the first Classic API initialization
task (first is defined by index zero in the Classic API initialization task
configuration table). If no Classic API initialization task exists, then it is
carried out by the first POSIX API initialization thread. If no initialization
task or thread exists, then no global construction is performed, see for
example :ref:`Specify Idle Task Performs Application Initialization`. The
Classic API task or POSIX API thread which carries out global construction is
called the main thread.
Global construction runs before the entry function of the main thread. The
configuration of the main thread must take the global construction into
account. In particular, the main thread stack size, priority, attributes and
initial modes must be set accordingly. Thread-local objects and POSIX key
values created during global construction are accessible by the main thread.
If other initialization tasks are configured, and one of them has a higher
priority than the main thread and the main thread is preemptible, this task
executes before the global construction. In case the main thread blocks during
global construction, then other tasks may run. In SMP configurations, other
initialization tasks may run in parallel with global construction. Tasks
created during global construction may preempt the main thread or run in
parallel in SMP configurations. All RTEMS services allowed in task context are
allowed during global construction.
Global constructors are C++ global object constructors or functions with the
constructor attribute. For example, the following test program
.. code-block:: c
#include <stdio.h>
#include <assert.h>
class A {
public:
A()
{
puts( "A:A()" );
}
};
static A a;
static thread_local int i;
static thread_local int j;
static __attribute__(( __constructor__ )) void b( void )
{
i = 1;
puts( "b()" );
}
static __attribute__(( __constructor__( 1000 ) )) void c( void )
{
puts( "c()" );
}
int main( void )
{
assert( i == 1 );
assert( j == 0 );
return 0;
}
should output:
.. code-block:: shell
c()
b()
A:A()
Directives
==========
This section details the Initialization Manager's directives. A subsection is
dedicated to each of this manager's directives and describes the calling
sequence, related constants, usage, and status codes.
.. raw:: latex
\clearpage
.. index:: initialize RTEMS
.. index:: start multitasking
.. index:: rtems_initialize_executive
.. _rtems_initialize_executive:
INITIALIZE_EXECUTIVE - Initialize RTEMS
---------------------------------------
CALLING SEQUENCE:
.. code-block:: c
void rtems_initialize_executive(void);
DIRECTIVE STATUS CODES:
NONE - This function will not return to the caller.
DESCRIPTION:
Iterates through the system initialization linker set and invokes the
registered handlers. The final step is to start multitasking.
NOTES:
This directive should be called by :c:func:`boot_card()` only.
This directive *does not return* to the caller. Errors in the
initialization sequence are usually fatal and lead to a system termination.
