diff options
Diffstat (limited to 'readline-6.2/doc/rluserman.info')
| -rw-r--r-- | readline-6.2/doc/rluserman.info | 1875 |
1 files changed, 1875 insertions, 0 deletions
diff --git a/readline-6.2/doc/rluserman.info b/readline-6.2/doc/rluserman.info new file mode 100644 index 0000000..dc06b20 --- /dev/null +++ b/readline-6.2/doc/rluserman.info @@ -0,0 +1,1875 @@ +This is rluserman.info, produced by makeinfo version 4.13 from +/usr/src/local/chet/src/bash/readline-src/doc/rluserman.texi. + +This manual describes the end user interface of the GNU Readline Library +(version 6.2, September 6 2010), a library which aids in the +consistency of user interface across discrete programs which provide a +command line interface. + + Copyright (C) 1988-2011 Free Software Foundation, Inc. + + Permission is granted to make and distribute verbatim copies of this +manual provided the copyright notice and this permission notice are +preserved on all copies. + + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.3 or any later version published by the Free Software + Foundation; with no Invariant Sections, with the Front-Cover texts + being "A GNU Manual", and with the Back-Cover Texts as in (a) + below. A copy of the license is included in the section entitled + "GNU Free Documentation License". + + (a) The FSF's Back-Cover Text is: You are free to copy and modify + this GNU manual. Buying copies from GNU Press supports the FSF in + developing GNU and promoting software freedom." + + +INFO-DIR-SECTION Libraries +START-INFO-DIR-ENTRY +* RLuserman: (rluserman). The GNU readline library User's Manual. +END-INFO-DIR-ENTRY + + +File: rluserman.info, Node: Top, Next: Command Line Editing, Up: (dir) + +GNU Readline Library +******************** + +This document describes the end user interface of the GNU Readline +Library, a utility which aids in the consistency of user interface +across discrete programs which provide a command line interface. + +* Menu: + +* Command Line Editing:: GNU Readline User's Manual. +* GNU Free Documentation License:: License for copying this manual. + + +File: rluserman.info, Node: Command Line Editing, Next: GNU Free Documentation License, Prev: Top, Up: Top + +1 Command Line Editing +********************** + +This chapter describes the basic features of the GNU command line +editing interface. + +* Menu: + +* Introduction and Notation:: Notation used in this text. +* Readline Interaction:: The minimum set of commands for editing a line. +* Readline Init File:: Customizing Readline from a user's view. +* Bindable Readline Commands:: A description of most of the Readline commands + available for binding +* Readline vi Mode:: A short description of how to make Readline + behave like the vi editor. + + +File: rluserman.info, Node: Introduction and Notation, Next: Readline Interaction, Up: Command Line Editing + +1.1 Introduction to Line Editing +================================ + +The following paragraphs describe the notation used to represent +keystrokes. + + The text `C-k' is read as `Control-K' and describes the character +produced when the <k> key is pressed while the Control key is depressed. + + The text `M-k' is read as `Meta-K' and describes the character +produced when the Meta key (if you have one) is depressed, and the <k> +key is pressed. The Meta key is labeled <ALT> on many keyboards. On +keyboards with two keys labeled <ALT> (usually to either side of the +space bar), the <ALT> on the left side is generally set to work as a +Meta key. The <ALT> key on the right may also be configured to work as +a Meta key or may be configured as some other modifier, such as a +Compose key for typing accented characters. + + If you do not have a Meta or <ALT> key, or another key working as a +Meta key, the identical keystroke can be generated by typing <ESC> +_first_, and then typing <k>. Either process is known as "metafying" +the <k> key. + + The text `M-C-k' is read as `Meta-Control-k' and describes the +character produced by "metafying" `C-k'. + + In addition, several keys have their own names. Specifically, +<DEL>, <ESC>, <LFD>, <SPC>, <RET>, and <TAB> all stand for themselves +when seen in this text, or in an init file (*note Readline Init File::). +If your keyboard lacks a <LFD> key, typing <C-j> will produce the +desired character. The <RET> key may be labeled <Return> or <Enter> on +some keyboards. + + +File: rluserman.info, Node: Readline Interaction, Next: Readline Init File, Prev: Introduction and Notation, Up: Command Line Editing + +1.2 Readline Interaction +======================== + +Often during an interactive session you type in a long line of text, +only to notice that the first word on the line is misspelled. The +Readline library gives you a set of commands for manipulating the text +as you type it in, allowing you to just fix your typo, and not forcing +you to retype the majority of the line. Using these editing commands, +you move the cursor to the place that needs correction, and delete or +insert the text of the corrections. Then, when you are satisfied with +the line, you simply press <RET>. You do not have to be at the end of +the line to press <RET>; the entire line is accepted regardless of the +location of the cursor within the line. + +* Menu: + +* Readline Bare Essentials:: The least you need to know about Readline. +* Readline Movement Commands:: Moving about the input line. +* Readline Killing Commands:: How to delete text, and how to get it back! +* Readline Arguments:: Giving numeric arguments to commands. +* Searching:: Searching through previous lines. + + +File: rluserman.info, Node: Readline Bare Essentials, Next: Readline Movement Commands, Up: Readline Interaction + +1.2.1 Readline Bare Essentials +------------------------------ + +In order to enter characters into the line, simply type them. The typed +character appears where the cursor was, and then the cursor moves one +space to the right. If you mistype a character, you can use your erase +character to back up and delete the mistyped character. + + Sometimes you may mistype a character, and not notice the error +until you have typed several other characters. In that case, you can +type `C-b' to move the cursor to the left, and then correct your +mistake. Afterwards, you can move the cursor to the right with `C-f'. + + When you add text in the middle of a line, you will notice that +characters to the right of the cursor are `pushed over' to make room +for the text that you have inserted. Likewise, when you delete text +behind the cursor, characters to the right of the cursor are `pulled +back' to fill in the blank space created by the removal of the text. A +list of the bare essentials for editing the text of an input line +follows. + +`C-b' + Move back one character. + +`C-f' + Move forward one character. + +<DEL> or <Backspace> + Delete the character to the left of the cursor. + +`C-d' + Delete the character underneath the cursor. + +Printing characters + Insert the character into the line at the cursor. + +`C-_' or `C-x C-u' + Undo the last editing command. You can undo all the way back to an + empty line. + +(Depending on your configuration, the <Backspace> key be set to delete +the character to the left of the cursor and the <DEL> key set to delete +the character underneath the cursor, like `C-d', rather than the +character to the left of the cursor.) + + +File: rluserman.info, Node: Readline Movement Commands, Next: Readline Killing Commands, Prev: Readline Bare Essentials, Up: Readline Interaction + +1.2.2 Readline Movement Commands +-------------------------------- + +The above table describes the most basic keystrokes that you need in +order to do editing of the input line. For your convenience, many +other commands have been added in addition to `C-b', `C-f', `C-d', and +<DEL>. Here are some commands for moving more rapidly about the line. + +`C-a' + Move to the start of the line. + +`C-e' + Move to the end of the line. + +`M-f' + Move forward a word, where a word is composed of letters and + digits. + +`M-b' + Move backward a word. + +`C-l' + Clear the screen, reprinting the current line at the top. + + Notice how `C-f' moves forward a character, while `M-f' moves +forward a word. It is a loose convention that control keystrokes +operate on characters while meta keystrokes operate on words. + + +File: rluserman.info, Node: Readline Killing Commands, Next: Readline Arguments, Prev: Readline Movement Commands, Up: Readline Interaction + +1.2.3 Readline Killing Commands +------------------------------- + +"Killing" text means to delete the text from the line, but to save it +away for later use, usually by "yanking" (re-inserting) it back into +the line. (`Cut' and `paste' are more recent jargon for `kill' and +`yank'.) + + If the description for a command says that it `kills' text, then you +can be sure that you can get the text back in a different (or the same) +place later. + + When you use a kill command, the text is saved in a "kill-ring". +Any number of consecutive kills save all of the killed text together, so +that when you yank it back, you get it all. The kill ring is not line +specific; the text that you killed on a previously typed line is +available to be yanked back later, when you are typing another line. + + Here is the list of commands for killing text. + +`C-k' + Kill the text from the current cursor position to the end of the + line. + +`M-d' + Kill from the cursor to the end of the current word, or, if between + words, to the end of the next word. Word boundaries are the same + as those used by `M-f'. + +`M-<DEL>' + Kill from the cursor the start of the current word, or, if between + words, to the start of the previous word. Word boundaries are the + same as those used by `M-b'. + +`C-w' + Kill from the cursor to the previous whitespace. This is + different than `M-<DEL>' because the word boundaries differ. + + + Here is how to "yank" the text back into the line. Yanking means to +copy the most-recently-killed text from the kill buffer. + +`C-y' + Yank the most recently killed text back into the buffer at the + cursor. + +`M-y' + Rotate the kill-ring, and yank the new top. You can only do this + if the prior command is `C-y' or `M-y'. + + +File: rluserman.info, Node: Readline Arguments, Next: Searching, Prev: Readline Killing Commands, Up: Readline Interaction + +1.2.4 Readline Arguments +------------------------ + +You can pass numeric arguments to Readline commands. Sometimes the +argument acts as a repeat count, other times it is the sign of the +argument that is significant. If you pass a negative argument to a +command which normally acts in a forward direction, that command will +act in a backward direction. For example, to kill text back to the +start of the line, you might type `M-- C-k'. + + The general way to pass numeric arguments to a command is to type +meta digits before the command. If the first `digit' typed is a minus +sign (`-'), then the sign of the argument will be negative. Once you +have typed one meta digit to get the argument started, you can type the +remainder of the digits, and then the command. For example, to give +the `C-d' command an argument of 10, you could type `M-1 0 C-d', which +will delete the next ten characters on the input line. + + +File: rluserman.info, Node: Searching, Prev: Readline Arguments, Up: Readline Interaction + +1.2.5 Searching for Commands in the History +------------------------------------------- + +Readline provides commands for searching through the command history +for lines containing a specified string. There are two search modes: +"incremental" and "non-incremental". + + Incremental searches begin before the user has finished typing the +search string. As each character of the search string is typed, +Readline displays the next entry from the history matching the string +typed so far. An incremental search requires only as many characters +as needed to find the desired history entry. To search backward in the +history for a particular string, type `C-r'. Typing `C-s' searches +forward through the history. The characters present in the value of +the `isearch-terminators' variable are used to terminate an incremental +search. If that variable has not been assigned a value, the <ESC> and +`C-J' characters will terminate an incremental search. `C-g' will +abort an incremental search and restore the original line. When the +search is terminated, the history entry containing the search string +becomes the current line. + + To find other matching entries in the history list, type `C-r' or +`C-s' as appropriate. This will search backward or forward in the +history for the next entry matching the search string typed so far. +Any other key sequence bound to a Readline command will terminate the +search and execute that command. For instance, a <RET> will terminate +the search and accept the line, thereby executing the command from the +history list. A movement command will terminate the search, make the +last line found the current line, and begin editing. + + Readline remembers the last incremental search string. If two +`C-r's are typed without any intervening characters defining a new +search string, any remembered search string is used. + + Non-incremental searches read the entire search string before +starting to search for matching history lines. The search string may be +typed by the user or be part of the contents of the current line. + + +File: rluserman.info, Node: Readline Init File, Next: Bindable Readline Commands, Prev: Readline Interaction, Up: Command Line Editing + +1.3 Readline Init File +====================== + +Although the Readline library comes with a set of Emacs-like +keybindings installed by default, it is possible to use a different set +of keybindings. Any user can customize programs that use Readline by +putting commands in an "inputrc" file, conventionally in his home +directory. The name of this file is taken from the value of the +environment variable `INPUTRC'. If that variable is unset, the default +is `~/.inputrc'. If that file does not exist or cannot be read, the +ultimate default is `/etc/inputrc'. + + When a program which uses the Readline library starts up, the init +file is read, and the key bindings are set. + + In addition, the `C-x C-r' command re-reads this init file, thus +incorporating any changes that you might have made to it. + +* Menu: + +* Readline Init File Syntax:: Syntax for the commands in the inputrc file. + +* Conditional Init Constructs:: Conditional key bindings in the inputrc file. + +* Sample Init File:: An example inputrc file. + + +File: rluserman.info, Node: Readline Init File Syntax, Next: Conditional Init Constructs, Up: Readline Init File + +1.3.1 Readline Init File Syntax +------------------------------- + +There are only a few basic constructs allowed in the Readline init +file. Blank lines are ignored. Lines beginning with a `#' are +comments. Lines beginning with a `$' indicate conditional constructs +(*note Conditional Init Constructs::). Other lines denote variable +settings and key bindings. + +Variable Settings + You can modify the run-time behavior of Readline by altering the + values of variables in Readline using the `set' command within the + init file. The syntax is simple: + + set VARIABLE VALUE + + Here, for example, is how to change from the default Emacs-like + key binding to use `vi' line editing commands: + + set editing-mode vi + + Variable names and values, where appropriate, are recognized + without regard to case. Unrecognized variable names are ignored. + + Boolean variables (those that can be set to on or off) are set to + on if the value is null or empty, ON (case-insensitive), or 1. + Any other value results in the variable being set to off. + + A great deal of run-time behavior is changeable with the following + variables. + + `bell-style' + Controls what happens when Readline wants to ring the + terminal bell. If set to `none', Readline never rings the + bell. If set to `visible', Readline uses a visible bell if + one is available. If set to `audible' (the default), + Readline attempts to ring the terminal's bell. + + `bind-tty-special-chars' + If set to `on', Readline attempts to bind the control + characters treated specially by the kernel's terminal driver + to their Readline equivalents. + + `comment-begin' + The string to insert at the beginning of the line when the + `insert-comment' command is executed. The default value is + `"#"'. + + `completion-display-width' + The number of screen columns used to display possible matches + when performing completion. The value is ignored if it is + less than 0 or greater than the terminal screen width. A + value of 0 will cause matches to be displayed one per line. + The default value is -1. + + `completion-ignore-case' + If set to `on', Readline performs filename matching and + completion in a case-insensitive fashion. The default value + is `off'. + + `completion-map-case' + If set to `on', and COMPLETION-IGNORE-CASE is enabled, + Readline treats hyphens (`-') and underscores (`_') as + equivalent when performing case-insensitive filename matching + and completion. + + `completion-prefix-display-length' + The length in characters of the common prefix of a list of + possible completions that is displayed without modification. + When set to a value greater than zero, common prefixes longer + than this value are replaced with an ellipsis when displaying + possible completions. + + `completion-query-items' + The number of possible completions that determines when the + user is asked whether the list of possibilities should be + displayed. If the number of possible completions is greater + than this value, Readline will ask the user whether or not he + wishes to view them; otherwise, they are simply listed. This + variable must be set to an integer value greater than or + equal to 0. A negative value means Readline should never ask. + The default limit is `100'. + + `convert-meta' + If set to `on', Readline will convert characters with the + eighth bit set to an ASCII key sequence by stripping the + eighth bit and prefixing an <ESC> character, converting them + to a meta-prefixed key sequence. The default value is `on'. + + `disable-completion' + If set to `On', Readline will inhibit word completion. + Completion characters will be inserted into the line as if + they had been mapped to `self-insert'. The default is `off'. + + `editing-mode' + The `editing-mode' variable controls which default set of key + bindings is used. By default, Readline starts up in Emacs + editing mode, where the keystrokes are most similar to Emacs. + This variable can be set to either `emacs' or `vi'. + + `echo-control-characters' + When set to `on', on operating systems that indicate they + support it, readline echoes a character corresponding to a + signal generated from the keyboard. The default is `on'. + + `enable-keypad' + When set to `on', Readline will try to enable the application + keypad when it is called. Some systems need this to enable + the arrow keys. The default is `off'. + + `enable-meta-key' + When set to `on', Readline will try to enable any meta + modifier key the terminal claims to support when it is + called. On many terminals, the meta key is used to send + eight-bit characters. The default is `on'. + + `expand-tilde' + If set to `on', tilde expansion is performed when Readline + attempts word completion. The default is `off'. + + `history-preserve-point' + If set to `on', the history code attempts to place the point + (the current cursor position) at the same location on each + history line retrieved with `previous-history' or + `next-history'. The default is `off'. + + `history-size' + Set the maximum number of history entries saved in the + history list. If set to zero, the number of entries in the + history list is not limited. + + `horizontal-scroll-mode' + This variable can be set to either `on' or `off'. Setting it + to `on' means that the text of the lines being edited will + scroll horizontally on a single screen line when they are + longer than the width of the screen, instead of wrapping onto + a new screen line. By default, this variable is set to `off'. + + `input-meta' + If set to `on', Readline will enable eight-bit input (it will + not clear the eighth bit in the characters it reads), + regardless of what the terminal claims it can support. The + default value is `off'. The name `meta-flag' is a synonym + for this variable. + + `isearch-terminators' + The string of characters that should terminate an incremental + search without subsequently executing the character as a + command (*note Searching::). If this variable has not been + given a value, the characters <ESC> and `C-J' will terminate + an incremental search. + + `keymap' + Sets Readline's idea of the current keymap for key binding + commands. Acceptable `keymap' names are `emacs', + `emacs-standard', `emacs-meta', `emacs-ctlx', `vi', `vi-move', + `vi-command', and `vi-insert'. `vi' is equivalent to + `vi-command'; `emacs' is equivalent to `emacs-standard'. The + default value is `emacs'. The value of the `editing-mode' + variable also affects the default keymap. + + `mark-directories' + If set to `on', completed directory names have a slash + appended. The default is `on'. + + `mark-modified-lines' + This variable, when set to `on', causes Readline to display an + asterisk (`*') at the start of history lines which have been + modified. This variable is `off' by default. + + `mark-symlinked-directories' + If set to `on', completed names which are symbolic links to + directories have a slash appended (subject to the value of + `mark-directories'). The default is `off'. + + `match-hidden-files' + This variable, when set to `on', causes Readline to match + files whose names begin with a `.' (hidden files) when + performing filename completion. If set to `off', the leading + `.' must be supplied by the user in the filename to be + completed. This variable is `on' by default. + + `menu-complete-display-prefix' + If set to `on', menu completion displays the common prefix of + the list of possible completions (which may be empty) before + cycling through the list. The default is `off'. + + `output-meta' + If set to `on', Readline will display characters with the + eighth bit set directly rather than as a meta-prefixed escape + sequence. The default is `off'. + + `page-completions' + If set to `on', Readline uses an internal `more'-like pager + to display a screenful of possible completions at a time. + This variable is `on' by default. + + `print-completions-horizontally' + If set to `on', Readline will display completions with matches + sorted horizontally in alphabetical order, rather than down + the screen. The default is `off'. + + `revert-all-at-newline' + If set to `on', Readline will undo all changes to history + lines before returning when `accept-line' is executed. By + default, history lines may be modified and retain individual + undo lists across calls to `readline'. The default is `off'. + + `show-all-if-ambiguous' + This alters the default behavior of the completion functions. + If set to `on', words which have more than one possible + completion cause the matches to be listed immediately instead + of ringing the bell. The default value is `off'. + + `show-all-if-unmodified' + This alters the default behavior of the completion functions + in a fashion similar to SHOW-ALL-IF-AMBIGUOUS. If set to + `on', words which have more than one possible completion + without any possible partial completion (the possible + completions don't share a common prefix) cause the matches to + be listed immediately instead of ringing the bell. The + default value is `off'. + + `skip-completed-text' + If set to `on', this alters the default completion behavior + when inserting a single match into the line. It's only + active when performing completion in the middle of a word. + If enabled, readline does not insert characters from the + completion that match characters after point in the word + being completed, so portions of the word following the cursor + are not duplicated. For instance, if this is enabled, + attempting completion when the cursor is after the `e' in + `Makefile' will result in `Makefile' rather than + `Makefilefile', assuming there is a single possible + completion. The default value is `off'. + + `visible-stats' + If set to `on', a character denoting a file's type is + appended to the filename when listing possible completions. + The default is `off'. + + +Key Bindings + The syntax for controlling key bindings in the init file is + simple. First you need to find the name of the command that you + want to change. The following sections contain tables of the + command name, the default keybinding, if any, and a short + description of what the command does. + + Once you know the name of the command, simply place on a line in + the init file the name of the key you wish to bind the command to, + a colon, and then the name of the command. There can be no space + between the key name and the colon - that will be interpreted as + part of the key name. The name of the key can be expressed in + different ways, depending on what you find most comfortable. + + In addition to command names, readline allows keys to be bound to + a string that is inserted when the key is pressed (a MACRO). + + KEYNAME: FUNCTION-NAME or MACRO + KEYNAME is the name of a key spelled out in English. For + example: + Control-u: universal-argument + Meta-Rubout: backward-kill-word + Control-o: "> output" + + In the above example, `C-u' is bound to the function + `universal-argument', `M-DEL' is bound to the function + `backward-kill-word', and `C-o' is bound to run the macro + expressed on the right hand side (that is, to insert the text + `> output' into the line). + + A number of symbolic character names are recognized while + processing this key binding syntax: DEL, ESC, ESCAPE, LFD, + NEWLINE, RET, RETURN, RUBOUT, SPACE, SPC, and TAB. + + "KEYSEQ": FUNCTION-NAME or MACRO + KEYSEQ differs from KEYNAME above in that strings denoting an + entire key sequence can be specified, by placing the key + sequence in double quotes. Some GNU Emacs style key escapes + can be used, as in the following example, but the special + character names are not recognized. + + "\C-u": universal-argument + "\C-x\C-r": re-read-init-file + "\e[11~": "Function Key 1" + + In the above example, `C-u' is again bound to the function + `universal-argument' (just as it was in the first example), + `C-x C-r' is bound to the function `re-read-init-file', and + `<ESC> <[> <1> <1> <~>' is bound to insert the text `Function + Key 1'. + + + The following GNU Emacs style escape sequences are available when + specifying key sequences: + + `\C-' + control prefix + + `\M-' + meta prefix + + `\e' + an escape character + + `\\' + backslash + + `\"' + <">, a double quotation mark + + `\'' + <'>, a single quote or apostrophe + + In addition to the GNU Emacs style escape sequences, a second set + of backslash escapes is available: + + `\a' + alert (bell) + + `\b' + backspace + + `\d' + delete + + `\f' + form feed + + `\n' + newline + + `\r' + carriage return + + `\t' + horizontal tab + + `\v' + vertical tab + + `\NNN' + the eight-bit character whose value is the octal value NNN + (one to three digits) + + `\xHH' + the eight-bit character whose value is the hexadecimal value + HH (one or two hex digits) + + When entering the text of a macro, single or double quotes must be + used to indicate a macro definition. Unquoted text is assumed to + be a function name. In the macro body, the backslash escapes + described above are expanded. Backslash will quote any other + character in the macro text, including `"' and `''. For example, + the following binding will make `C-x \' insert a single `\' into + the line: + "\C-x\\": "\\" + + + +File: rluserman.info, Node: Conditional Init Constructs, Next: Sample Init File, Prev: Readline Init File Syntax, Up: Readline Init File + +1.3.2 Conditional Init Constructs +--------------------------------- + +Readline implements a facility similar in spirit to the conditional +compilation features of the C preprocessor which allows key bindings +and variable settings to be performed as the result of tests. There +are four parser directives used. + +`$if' + The `$if' construct allows bindings to be made based on the + editing mode, the terminal being used, or the application using + Readline. The text of the test extends to the end of the line; no + characters are required to isolate it. + + `mode' + The `mode=' form of the `$if' directive is used to test + whether Readline is in `emacs' or `vi' mode. This may be + used in conjunction with the `set keymap' command, for + instance, to set bindings in the `emacs-standard' and + `emacs-ctlx' keymaps only if Readline is starting out in + `emacs' mode. + + `term' + The `term=' form may be used to include terminal-specific key + bindings, perhaps to bind the key sequences output by the + terminal's function keys. The word on the right side of the + `=' is tested against both the full name of the terminal and + the portion of the terminal name before the first `-'. This + allows `sun' to match both `sun' and `sun-cmd', for instance. + + `application' + The APPLICATION construct is used to include + application-specific settings. Each program using the + Readline library sets the APPLICATION NAME, and you can test + for a particular value. This could be used to bind key + sequences to functions useful for a specific program. For + instance, the following command adds a key sequence that + quotes the current or previous word in Bash: + $if Bash + # Quote the current or previous word + "\C-xq": "\eb\"\ef\"" + $endif + +`$endif' + This command, as seen in the previous example, terminates an `$if' + command. + +`$else' + Commands in this branch of the `$if' directive are executed if the + test fails. + +`$include' + This directive takes a single filename as an argument and reads + commands and bindings from that file. For example, the following + directive reads from `/etc/inputrc': + $include /etc/inputrc + + +File: rluserman.info, Node: Sample Init File, Prev: Conditional Init Constructs, Up: Readline Init File + +1.3.3 Sample Init File +---------------------- + +Here is an example of an INPUTRC file. This illustrates key binding, +variable assignment, and conditional syntax. + + + # This file controls the behaviour of line input editing for + # programs that use the GNU Readline library. Existing + # programs include FTP, Bash, and GDB. + # + # You can re-read the inputrc file with C-x C-r. + # Lines beginning with '#' are comments. + # + # First, include any systemwide bindings and variable + # assignments from /etc/Inputrc + $include /etc/Inputrc + + # + # Set various bindings for emacs mode. + + set editing-mode emacs + + $if mode=emacs + + Meta-Control-h: backward-kill-word Text after the function name is ignored + + # + # Arrow keys in keypad mode + # + #"\M-OD": backward-char + #"\M-OC": forward-char + #"\M-OA": previous-history + #"\M-OB": next-history + # + # Arrow keys in ANSI mode + # + "\M-[D": backward-char + "\M-[C": forward-char + "\M-[A": previous-history + "\M-[B": next-history + # + # Arrow keys in 8 bit keypad mode + # + #"\M-\C-OD": backward-char + #"\M-\C-OC": forward-char + #"\M-\C-OA": previous-history + #"\M-\C-OB": next-history + # + # Arrow keys in 8 bit ANSI mode + # + #"\M-\C-[D": backward-char + #"\M-\C-[C": forward-char + #"\M-\C-[A": previous-history + #"\M-\C-[B": next-history + + C-q: quoted-insert + + $endif + + # An old-style binding. This happens to be the default. + TAB: complete + + # Macros that are convenient for shell interaction + $if Bash + # edit the path + "\C-xp": "PATH=${PATH}\e\C-e\C-a\ef\C-f" + # prepare to type a quoted word -- + # insert open and close double quotes + # and move to just after the open quote + "\C-x\"": "\"\"\C-b" + # insert a backslash (testing backslash escapes + # in sequences and macros) + "\C-x\\": "\\" + # Quote the current or previous word + "\C-xq": "\eb\"\ef\"" + # Add a binding to refresh the line, which is unbound + "\C-xr": redraw-current-line + # Edit variable on current line. + "\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y=" + $endif + + # use a visible bell if one is available + set bell-style visible + + # don't strip characters to 7 bits when reading + set input-meta on + + # allow iso-latin1 characters to be inserted rather + # than converted to prefix-meta sequences + set convert-meta off + + # display characters with the eighth bit set directly + # rather than as meta-prefixed characters + set output-meta on + + # if there are more than 150 possible completions for + # a word, ask the user if he wants to see all of them + set completion-query-items 150 + + # For FTP + $if Ftp + "\C-xg": "get \M-?" + "\C-xt": "put \M-?" + "\M-.": yank-last-arg + $endif + + +File: rluserman.info, Node: Bindable Readline Commands, Next: Readline vi Mode, Prev: Readline Init File, Up: Command Line Editing + +1.4 Bindable Readline Commands +============================== + +* Menu: + +* Commands For Moving:: Moving about the line. +* Commands For History:: Getting at previous lines. +* Commands For Text:: Commands for changing text. +* Commands For Killing:: Commands for killing and yanking. +* Numeric Arguments:: Specifying numeric arguments, repeat counts. +* Commands For Completion:: Getting Readline to do the typing for you. +* Keyboard Macros:: Saving and re-executing typed characters +* Miscellaneous Commands:: Other miscellaneous commands. + + This section describes Readline commands that may be bound to key +sequences. Command names without an accompanying key sequence are +unbound by default. + + In the following descriptions, "point" refers to the current cursor +position, and "mark" refers to a cursor position saved by the +`set-mark' command. The text between the point and mark is referred to +as the "region". + + +File: rluserman.info, Node: Commands For Moving, Next: Commands For History, Up: Bindable Readline Commands + +1.4.1 Commands For Moving +------------------------- + +`beginning-of-line (C-a)' + Move to the start of the current line. + +`end-of-line (C-e)' + Move to the end of the line. + +`forward-char (C-f)' + Move forward a character. + +`backward-char (C-b)' + Move back a character. + +`forward-word (M-f)' + Move forward to the end of the next word. Words are composed of + letters and digits. + +`backward-word (M-b)' + Move back to the start of the current or previous word. Words are + composed of letters and digits. + +`clear-screen (C-l)' + Clear the screen and redraw the current line, leaving the current + line at the top of the screen. + +`redraw-current-line ()' + Refresh the current line. By default, this is unbound. + + + +File: rluserman.info, Node: Commands For History, Next: Commands For Text, Prev: Commands For Moving, Up: Bindable Readline Commands + +1.4.2 Commands For Manipulating The History +------------------------------------------- + +`accept-line (Newline or Return)' + Accept the line regardless of where the cursor is. If this line is + non-empty, it may be added to the history list for future recall + with `add_history()'. If this line is a modified history line, + the history line is restored to its original state. + +`previous-history (C-p)' + Move `back' through the history list, fetching the previous + command. + +`next-history (C-n)' + Move `forward' through the history list, fetching the next command. + +`beginning-of-history (M-<)' + Move to the first line in the history. + +`end-of-history (M->)' + Move to the end of the input history, i.e., the line currently + being entered. + +`reverse-search-history (C-r)' + Search backward starting at the current line and moving `up' + through the history as necessary. This is an incremental search. + +`forward-search-history (C-s)' + Search forward starting at the current line and moving `down' + through the the history as necessary. This is an incremental + search. + +`non-incremental-reverse-search-history (M-p)' + Search backward starting at the current line and moving `up' + through the history as necessary using a non-incremental search + for a string supplied by the user. + +`non-incremental-forward-search-history (M-n)' + Search forward starting at the current line and moving `down' + through the the history as necessary using a non-incremental search + for a string supplied by the user. + +`history-search-forward ()' + Search forward through the history for the string of characters + between the start of the current line and the point. This is a + non-incremental search. By default, this command is unbound. + +`history-search-backward ()' + Search backward through the history for the string of characters + between the start of the current line and the point. This is a + non-incremental search. By default, this command is unbound. + +`yank-nth-arg (M-C-y)' + Insert the first argument to the previous command (usually the + second word on the previous line) at point. With an argument N, + insert the Nth word from the previous command (the words in the + previous command begin with word 0). A negative argument inserts + the Nth word from the end of the previous command. Once the + argument N is computed, the argument is extracted as if the `!N' + history expansion had been specified. + +`yank-last-arg (M-. or M-_)' + Insert last argument to the previous command (the last word of the + previous history entry). With a numeric argument, behave exactly + like `yank-nth-arg'. Successive calls to `yank-last-arg' move + back through the history list, inserting the last word (or the + word specified by the argument to the first call) of each line in + turn. Any numeric argument supplied to these successive calls + determines the direction to move through the history. A negative + argument switches the direction through the history (back or + forward). The history expansion facilities are used to extract + the last argument, as if the `!$' history expansion had been + specified. + + + +File: rluserman.info, Node: Commands For Text, Next: Commands For Killing, Prev: Commands For History, Up: Bindable Readline Commands + +1.4.3 Commands For Changing Text +-------------------------------- + +`delete-char (C-d)' + Delete the character at point. If point is at the beginning of + the line, there are no characters in the line, and the last + character typed was not bound to `delete-char', then return EOF. + +`backward-delete-char (Rubout)' + Delete the character behind the cursor. A numeric argument means + to kill the characters instead of deleting them. + +`forward-backward-delete-char ()' + Delete the character under the cursor, unless the cursor is at the + end of the line, in which case the character behind the cursor is + deleted. By default, this is not bound to a key. + +`quoted-insert (C-q or C-v)' + Add the next character typed to the line verbatim. This is how to + insert key sequences like `C-q', for example. + +`tab-insert (M-<TAB>)' + Insert a tab character. + +`self-insert (a, b, A, 1, !, ...)' + Insert yourself. + +`transpose-chars (C-t)' + Drag the character before the cursor forward over the character at + the cursor, moving the cursor forward as well. If the insertion + point is at the end of the line, then this transposes the last two + characters of the line. Negative arguments have no effect. + +`transpose-words (M-t)' + Drag the word before point past the word after point, moving point + past that word as well. If the insertion point is at the end of + the line, this transposes the last two words on the line. + +`upcase-word (M-u)' + Uppercase the current (or following) word. With a negative + argument, uppercase the previous word, but do not move the cursor. + +`downcase-word (M-l)' + Lowercase the current (or following) word. With a negative + argument, lowercase the previous word, but do not move the cursor. + +`capitalize-word (M-c)' + Capitalize the current (or following) word. With a negative + argument, capitalize the previous word, but do not move the cursor. + +`overwrite-mode ()' + Toggle overwrite mode. With an explicit positive numeric argument, + switches to overwrite mode. With an explicit non-positive numeric + argument, switches to insert mode. This command affects only + `emacs' mode; `vi' mode does overwrite differently. Each call to + `readline()' starts in insert mode. + + In overwrite mode, characters bound to `self-insert' replace the + text at point rather than pushing the text to the right. + Characters bound to `backward-delete-char' replace the character + before point with a space. + + By default, this command is unbound. + + + +File: rluserman.info, Node: Commands For Killing, Next: Numeric Arguments, Prev: Commands For Text, Up: Bindable Readline Commands + +1.4.4 Killing And Yanking +------------------------- + +`kill-line (C-k)' + Kill the text from point to the end of the line. + +`backward-kill-line (C-x Rubout)' + Kill backward to the beginning of the line. + +`unix-line-discard (C-u)' + Kill backward from the cursor to the beginning of the current line. + +`kill-whole-line ()' + Kill all characters on the current line, no matter where point is. + By default, this is unbound. + +`kill-word (M-d)' + Kill from point to the end of the current word, or if between + words, to the end of the next word. Word boundaries are the same + as `forward-word'. + +`backward-kill-word (M-<DEL>)' + Kill the word behind point. Word boundaries are the same as + `backward-word'. + +`unix-word-rubout (C-w)' + Kill the word behind point, using white space as a word boundary. + The killed text is saved on the kill-ring. + +`unix-filename-rubout ()' + Kill the word behind point, using white space and the slash + character as the word boundaries. The killed text is saved on the + kill-ring. + +`delete-horizontal-space ()' + Delete all spaces and tabs around point. By default, this is + unbound. + +`kill-region ()' + Kill the text in the current region. By default, this command is + unbound. + +`copy-region-as-kill ()' + Copy the text in the region to the kill buffer, so it can be yanked + right away. By default, this command is unbound. + +`copy-backward-word ()' + Copy the word before point to the kill buffer. The word + boundaries are the same as `backward-word'. By default, this + command is unbound. + +`copy-forward-word ()' + Copy the word following point to the kill buffer. The word + boundaries are the same as `forward-word'. By default, this + command is unbound. + +`yank (C-y)' + Yank the top of the kill ring into the buffer at point. + +`yank-pop (M-y)' + Rotate the kill-ring, and yank the new top. You can only do this + if the prior command is `yank' or `yank-pop'. + + +File: rluserman.info, Node: Numeric Arguments, Next: Commands For Completion, Prev: Commands For Killing, Up: Bindable Readline Commands + +1.4.5 Specifying Numeric Arguments +---------------------------------- + +`digit-argument (M-0, M-1, ... M--)' + Add this digit to the argument already accumulating, or start a new + argument. `M--' starts a negative argument. + +`universal-argument ()' + This is another way to specify an argument. If this command is + followed by one or more digits, optionally with a leading minus + sign, those digits define the argument. If the command is + followed by digits, executing `universal-argument' again ends the + numeric argument, but is otherwise ignored. As a special case, if + this command is immediately followed by a character that is + neither a digit or minus sign, the argument count for the next + command is multiplied by four. The argument count is initially + one, so executing this function the first time makes the argument + count four, a second time makes the argument count sixteen, and so + on. By default, this is not bound to a key. + + +File: rluserman.info, Node: Commands For Completion, Next: Keyboard Macros, Prev: Numeric Arguments, Up: Bindable Readline Commands + +1.4.6 Letting Readline Type For You +----------------------------------- + +`complete (<TAB>)' + Attempt to perform completion on the text before point. The + actual completion performed is application-specific. The default + is filename completion. + +`possible-completions (M-?)' + List the possible completions of the text before point. When + displaying completions, Readline sets the number of columns used + for display to the value of `completion-display-width', the value + of the environment variable `COLUMNS', or the screen width, in + that order. + +`insert-completions (M-*)' + Insert all completions of the text before point that would have + been generated by `possible-completions'. + +`menu-complete ()' + Similar to `complete', but replaces the word to be completed with + a single match from the list of possible completions. Repeated + execution of `menu-complete' steps through the list of possible + completions, inserting each match in turn. At the end of the list + of completions, the bell is rung (subject to the setting of + `bell-style') and the original text is restored. An argument of N + moves N positions forward in the list of matches; a negative + argument may be used to move backward through the list. This + command is intended to be bound to <TAB>, but is unbound by + default. + +`menu-complete-backward ()' + Identical to `menu-complete', but moves backward through the list + of possible completions, as if `menu-complete' had been given a + negative argument. + +`delete-char-or-list ()' + Deletes the character under the cursor if not at the beginning or + end of the line (like `delete-char'). If at the end of the line, + behaves identically to `possible-completions'. This command is + unbound by default. + + + +File: rluserman.info, Node: Keyboard Macros, Next: Miscellaneous Commands, Prev: Commands For Completion, Up: Bindable Readline Commands + +1.4.7 Keyboard Macros +--------------------- + +`start-kbd-macro (C-x ()' + Begin saving the characters typed into the current keyboard macro. + +`end-kbd-macro (C-x ))' + Stop saving the characters typed into the current keyboard macro + and save the definition. + +`call-last-kbd-macro (C-x e)' + Re-execute the last keyboard macro defined, by making the + characters in the macro appear as if typed at the keyboard. + + + +File: rluserman.info, Node: Miscellaneous Commands, Prev: Keyboard Macros, Up: Bindable Readline Commands + +1.4.8 Some Miscellaneous Commands +--------------------------------- + +`re-read-init-file (C-x C-r)' + Read in the contents of the INPUTRC file, and incorporate any + bindings or variable assignments found there. + +`abort (C-g)' + Abort the current editing command and ring the terminal's bell + (subject to the setting of `bell-style'). + +`do-uppercase-version (M-a, M-b, M-X, ...)' + If the metafied character X is lowercase, run the command that is + bound to the corresponding uppercase character. + +`prefix-meta (<ESC>)' + Metafy the next character typed. This is for keyboards without a + meta key. Typing `<ESC> f' is equivalent to typing `M-f'. + +`undo (C-_ or C-x C-u)' + Incremental undo, separately remembered for each line. + +`revert-line (M-r)' + Undo all changes made to this line. This is like executing the + `undo' command enough times to get back to the beginning. + +`tilde-expand (M-~)' + Perform tilde expansion on the current word. + +`set-mark (C-@)' + Set the mark to the point. If a numeric argument is supplied, the + mark is set to that position. + +`exchange-point-and-mark (C-x C-x)' + Swap the point with the mark. The current cursor position is set + to the saved position, and the old cursor position is saved as the + mark. + +`character-search (C-])' + A character is read and point is moved to the next occurrence of + that character. A negative count searches for previous + occurrences. + +`character-search-backward (M-C-])' + A character is read and point is moved to the previous occurrence + of that character. A negative count searches for subsequent + occurrences. + +`skip-csi-sequence ()' + Read enough characters to consume a multi-key sequence such as + those defined for keys like Home and End. Such sequences begin + with a Control Sequence Indicator (CSI), usually ESC-[. If this + sequence is bound to "\e[", keys producing such sequences will + have no effect unless explicitly bound to a readline command, + instead of inserting stray characters into the editing buffer. + This is unbound by default, but usually bound to ESC-[. + +`insert-comment (M-#)' + Without a numeric argument, the value of the `comment-begin' + variable is inserted at the beginning of the current line. If a + numeric argument is supplied, this command acts as a toggle: if + the characters at the beginning of the line do not match the value + of `comment-begin', the value is inserted, otherwise the + characters in `comment-begin' are deleted from the beginning of + the line. In either case, the line is accepted as if a newline + had been typed. + +`dump-functions ()' + Print all of the functions and their key bindings to the Readline + output stream. If a numeric argument is supplied, the output is + formatted in such a way that it can be made part of an INPUTRC + file. This command is unbound by default. + +`dump-variables ()' + Print all of the settable variables and their values to the + Readline output stream. If a numeric argument is supplied, the + output is formatted in such a way that it can be made part of an + INPUTRC file. This command is unbound by default. + +`dump-macros ()' + Print all of the Readline key sequences bound to macros and the + strings they output. If a numeric argument is supplied, the + output is formatted in such a way that it can be made part of an + INPUTRC file. This command is unbound by default. + +`emacs-editing-mode (C-e)' + When in `vi' command mode, this causes a switch to `emacs' editing + mode. + +`vi-editing-mode (M-C-j)' + When in `emacs' editing mode, this causes a switch to `vi' editing + mode. + + + +File: rluserman.info, Node: Readline vi Mode, Prev: Bindable Readline Commands, Up: Command Line Editing + +1.5 Readline vi Mode +==================== + +While the Readline library does not have a full set of `vi' editing +functions, it does contain enough to allow simple editing of the line. +The Readline `vi' mode behaves as specified in the POSIX standard. + + In order to switch interactively between `emacs' and `vi' editing +modes, use the command `M-C-j' (bound to emacs-editing-mode when in +`vi' mode and to vi-editing-mode in `emacs' mode). The Readline +default is `emacs' mode. + + When you enter a line in `vi' mode, you are already placed in +`insertion' mode, as if you had typed an `i'. Pressing <ESC> switches +you into `command' mode, where you can edit the text of the line with +the standard `vi' movement keys, move to previous history lines with +`k' and subsequent lines with `j', and so forth. + + +File: rluserman.info, Node: GNU Free Documentation License, Prev: Command Line Editing, Up: Top + +Appendix A GNU Free Documentation License +***************************************** + + Version 1.3, 3 November 2008 + + Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. + `http://fsf.org/' + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + 0. PREAMBLE + + The purpose of this License is to make a manual, textbook, or other + functional and useful document "free" in the sense of freedom: to + assure everyone the effective freedom to copy and redistribute it, + with or without modifying it, either commercially or + noncommercially. Secondarily, this License preserves for the + author and publisher a way to get credit for their work, while not + being considered responsible for modifications made by others. + + This License is a kind of "copyleft", which means that derivative + works of the document must themselves be free in the same sense. + It complements the GNU General Public License, which is a copyleft + license designed for free software. + + We have designed this License in order to use it for manuals for + free software, because free software needs free documentation: a + free program should come with manuals providing the same freedoms + that the software does. But this License is not limited to + software manuals; it can be used for any textual work, regardless + of subject matter or whether it is published as a printed book. + We recommend this License principally for works whose purpose is + instruction or reference. + + 1. APPLICABILITY AND DEFINITIONS + + This License applies to any manual or other work, in any medium, + that contains a notice placed by the copyright holder saying it + can be distributed under the terms of this License. Such a notice + grants a world-wide, royalty-free license, unlimited in duration, + to use that work under the conditions stated herein. The + "Document", below, refers to any such manual or work. Any member + of the public is a licensee, and is addressed as "you". You + accept the license if you copy, modify or distribute the work in a + way requiring permission under copyright law. + + A "Modified Version" of the Document means any work containing the + Document or a portion of it, either copied verbatim, or with + modifications and/or translated into another language. + + A "Secondary Section" is a named appendix or a front-matter section + of the Document that deals exclusively with the relationship of the + publishers or authors of the Document to the Document's overall + subject (or to related matters) and contains nothing that could + fall directly within that overall subject. (Thus, if the Document + is in part a textbook of mathematics, a Secondary Section may not + explain any mathematics.) The relationship could be a matter of + historical connection with the subject or with related matters, or + of legal, commercial, philosophical, ethical or political position + regarding them. + + The "Invariant Sections" are certain Secondary Sections whose + titles are designated, as being those of Invariant Sections, in + the notice that says that the Document is released under this + License. If a section does not fit the above definition of + Secondary then it is not allowed to be designated as Invariant. + The Document may contain zero Invariant Sections. If the Document + does not identify any Invariant Sections then there are none. + + The "Cover Texts" are certain short passages of text that are + listed, as Front-Cover Texts or Back-Cover Texts, in the notice + that says that the Document is released under this License. A + Front-Cover Text may be at most 5 words, and a Back-Cover Text may + be at most 25 words. + + A "Transparent" copy of the Document means a machine-readable copy, + represented in a format whose specification is available to the + general public, that is suitable for revising the document + straightforwardly with generic text editors or (for images + composed of pixels) generic paint programs or (for drawings) some + widely available drawing editor, and that is suitable for input to + text formatters or for automatic translation to a variety of + formats suitable for input to text formatters. A copy made in an + otherwise Transparent file format whose markup, or absence of + markup, has been arranged to thwart or discourage subsequent + modification by readers is not Transparent. An image format is + not Transparent if used for any substantial amount of text. A + copy that is not "Transparent" is called "Opaque". + + Examples of suitable formats for Transparent copies include plain + ASCII without markup, Texinfo input format, LaTeX input format, + SGML or XML using a publicly available DTD, and + standard-conforming simple HTML, PostScript or PDF designed for + human modification. Examples of transparent image formats include + PNG, XCF and JPG. Opaque formats include proprietary formats that + can be read and edited only by proprietary word processors, SGML or + XML for which the DTD and/or processing tools are not generally + available, and the machine-generated HTML, PostScript or PDF + produced by some word processors for output purposes only. + + The "Title Page" means, for a printed book, the title page itself, + plus such following pages as are needed to hold, legibly, the + material this License requires to appear in the title page. For + works in formats which do not have any title page as such, "Title + Page" means the text near the most prominent appearance of the + work's title, preceding the beginning of the body of the text. + + The "publisher" means any person or entity that distributes copies + of the Document to the public. + + A section "Entitled XYZ" means a named subunit of the Document + whose title either is precisely XYZ or contains XYZ in parentheses + following text that translates XYZ in another language. (Here XYZ + stands for a specific section name mentioned below, such as + "Acknowledgements", "Dedications", "Endorsements", or "History".) + To "Preserve the Title" of such a section when you modify the + Document means that it remains a section "Entitled XYZ" according + to this definition. + + The Document may include Warranty Disclaimers next to the notice + which states that this License applies to the Document. These + Warranty Disclaimers are considered to be included by reference in + this License, but only as regards disclaiming warranties: any other + implication that these Warranty Disclaimers may have is void and + has no effect on the meaning of this License. + + 2. VERBATIM COPYING + + You may copy and distribute the Document in any medium, either + commercially or noncommercially, provided that this License, the + copyright notices, and the license notice saying this License + applies to the Document are reproduced in all copies, and that you + add no other conditions whatsoever to those of this License. You + may not use technical measures to obstruct or control the reading + or further copying of the copies you make or distribute. However, + you may accept compensation in exchange for copies. If you + distribute a large enough number of copies you must also follow + the conditions in section 3. + + You may also lend copies, under the same conditions stated above, + and you may publicly display copies. + + 3. COPYING IN QUANTITY + + If you publish printed copies (or copies in media that commonly + have printed covers) of the Document, numbering more than 100, and + the Document's license notice requires Cover Texts, you must + enclose the copies in covers that carry, clearly and legibly, all + these Cover Texts: Front-Cover Texts on the front cover, and + Back-Cover Texts on the back cover. Both covers must also clearly + and legibly identify you as the publisher of these copies. The + front cover must present the full title with all words of the + title equally prominent and visible. You may add other material + on the covers in addition. Copying with changes limited to the + covers, as long as they preserve the title of the Document and + satisfy these conditions, can be treated as verbatim copying in + other respects. + + If the required texts for either cover are too voluminous to fit + legibly, you should put the first ones listed (as many as fit + reasonably) on the actual cover, and continue the rest onto + adjacent pages. + + If you publish or distribute Opaque copies of the Document + numbering more than 100, you must either include a + machine-readable Transparent copy along with each Opaque copy, or + state in or with each Opaque copy a computer-network location from + which the general network-using public has access to download + using public-standard network protocols a complete Transparent + copy of the Document, free of added material. If you use the + latter option, you must take reasonably prudent steps, when you + begin distribution of Opaque copies in quantity, to ensure that + this Transparent copy will remain thus accessible at the stated + location until at least one year after the last time you + distribute an Opaque copy (directly or through your agents or + retailers) of that edition to the public. + + It is requested, but not required, that you contact the authors of + the Document well before redistributing any large number of + copies, to give them a chance to provide you with an updated + version of the Document. + + 4. MODIFICATIONS + + You may copy and distribute a Modified Version of the Document + under the conditions of sections 2 and 3 above, provided that you + release the Modified Version under precisely this License, with + the Modified Version filling the role of the Document, thus + licensing distribution and modification of the Modified Version to + whoever possesses a copy of it. In addition, you must do these + things in the Modified Version: + + A. Use in the Title Page (and on the covers, if any) a title + distinct from that of the Document, and from those of + previous versions (which should, if there were any, be listed + in the History section of the Document). You may use the + same title as a previous version if the original publisher of + that version gives permission. + + B. List on the Title Page, as authors, one or more persons or + entities responsible for authorship of the modifications in + the Modified Version, together with at least five of the + principal authors of the Document (all of its principal + authors, if it has fewer than five), unless they release you + from this requirement. + + C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. + + D. Preserve all the copyright notices of the Document. + + E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. + + F. Include, immediately after the copyright notices, a license + notice giving the public permission to use the Modified + Version under the terms of this License, in the form shown in + the Addendum below. + + G. Preserve in that license notice the full lists of Invariant + Sections and required Cover Texts given in the Document's + license notice. + + H. Include an unaltered copy of this License. + + I. Preserve the section Entitled "History", Preserve its Title, + and add to it an item stating at least the title, year, new + authors, and publisher of the Modified Version as given on + the Title Page. If there is no section Entitled "History" in + the Document, create one stating the title, year, authors, + and publisher of the Document as given on its Title Page, + then add an item describing the Modified Version as stated in + the previous sentence. + + J. Preserve the network location, if any, given in the Document + for public access to a Transparent copy of the Document, and + likewise the network locations given in the Document for + previous versions it was based on. These may be placed in + the "History" section. You may omit a network location for a + work that was published at least four years before the + Document itself, or if the original publisher of the version + it refers to gives permission. + + K. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the + section all the substance and tone of each of the contributor + acknowledgements and/or dedications given therein. + + L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section + titles. + + M. Delete any section Entitled "Endorsements". Such a section + may not be included in the Modified Version. + + N. Do not retitle any existing section to be Entitled + "Endorsements" or to conflict in title with any Invariant + Section. + + O. Preserve any Warranty Disclaimers. + + If the Modified Version includes new front-matter sections or + appendices that qualify as Secondary Sections and contain no + material copied from the Document, you may at your option + designate some or all of these sections as invariant. To do this, + add their titles to the list of Invariant Sections in the Modified + Version's license notice. These titles must be distinct from any + other section titles. + + You may add a section Entitled "Endorsements", provided it contains + nothing but endorsements of your Modified Version by various + parties--for example, statements of peer review or that the text + has been approved by an organization as the authoritative + definition of a standard. + + You may add a passage of up to five words as a Front-Cover Text, + and a passage of up to 25 words as a Back-Cover Text, to the end + of the list of Cover Texts in the Modified Version. Only one + passage of Front-Cover Text and one of Back-Cover Text may be + added by (or through arrangements made by) any one entity. If the + Document already includes a cover text for the same cover, + previously added by you or by arrangement made by the same entity + you are acting on behalf of, you may not add another; but you may + replace the old one, on explicit permission from the previous + publisher that added the old one. + + The author(s) and publisher(s) of the Document do not by this + License give permission to use their names for publicity for or to + assert or imply endorsement of any Modified Version. + + 5. COMBINING DOCUMENTS + + You may combine the Document with other documents released under + this License, under the terms defined in section 4 above for + modified versions, provided that you include in the combination + all of the Invariant Sections of all of the original documents, + unmodified, and list them all as Invariant Sections of your + combined work in its license notice, and that you preserve all + their Warranty Disclaimers. + + The combined work need only contain one copy of this License, and + multiple identical Invariant Sections may be replaced with a single + copy. If there are multiple Invariant Sections with the same name + but different contents, make the title of each such section unique + by adding at the end of it, in parentheses, the name of the + original author or publisher of that section if known, or else a + unique number. Make the same adjustment to the section titles in + the list of Invariant Sections in the license notice of the + combined work. + + In the combination, you must combine any sections Entitled + "History" in the various original documents, forming one section + Entitled "History"; likewise combine any sections Entitled + "Acknowledgements", and any sections Entitled "Dedications". You + must delete all sections Entitled "Endorsements." + + 6. COLLECTIONS OF DOCUMENTS + + You may make a collection consisting of the Document and other + documents released under this License, and replace the individual + copies of this License in the various documents with a single copy + that is included in the collection, provided that you follow the + rules of this License for verbatim copying of each of the + documents in all other respects. + + You may extract a single document from such a collection, and + distribute it individually under this License, provided you insert + a copy of this License into the extracted document, and follow + this License in all other respects regarding verbatim copying of + that document. + + 7. AGGREGATION WITH INDEPENDENT WORKS + + A compilation of the Document or its derivatives with other + separate and independent documents or works, in or on a volume of + a storage or distribution medium, is called an "aggregate" if the + copyright resulting from the compilation is not used to limit the + legal rights of the compilation's users beyond what the individual + works permit. When the Document is included in an aggregate, this + License does not apply to the other works in the aggregate which + are not themselves derivative works of the Document. + + If the Cover Text requirement of section 3 is applicable to these + copies of the Document, then if the Document is less than one half + of the entire aggregate, the Document's Cover Texts may be placed + on covers that bracket the Document within the aggregate, or the + electronic equivalent of covers if the Document is in electronic + form. Otherwise they must appear on printed covers that bracket + the whole aggregate. + + 8. TRANSLATION + + Translation is considered a kind of modification, so you may + distribute translations of the Document under the terms of section + 4. Replacing Invariant Sections with translations requires special + permission from their copyright holders, but you may include + translations of some or all Invariant Sections in addition to the + original versions of these Invariant Sections. You may include a + translation of this License, and all the license notices in the + Document, and any Warranty Disclaimers, provided that you also + include the original English version of this License and the + original versions of those notices and disclaimers. In case of a + disagreement between the translation and the original version of + this License or a notice or disclaimer, the original version will + prevail. + + If a section in the Document is Entitled "Acknowledgements", + "Dedications", or "History", the requirement (section 4) to + Preserve its Title (section 1) will typically require changing the + actual title. + + 9. TERMINATION + + You may not copy, modify, sublicense, or distribute the Document + except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense, or distribute it is void, + and will automatically terminate your rights under this License. + + However, if you cease all violation of this License, then your + license from a particular copyright holder is reinstated (a) + provisionally, unless and until the copyright holder explicitly + and finally terminates your license, and (b) permanently, if the + copyright holder fails to notify you of the violation by some + reasonable means prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you have + received notice of violation of this License (for any work) from + that copyright holder, and you cure the violation prior to 30 days + after your receipt of the notice. + + Termination of your rights under this section does not terminate + the licenses of parties who have received copies or rights from + you under this License. If your rights have been terminated and + not permanently reinstated, receipt of a copy of some or all of + the same material does not give you any rights to use it. + + 10. FUTURE REVISIONS OF THIS LICENSE + + The Free Software Foundation may publish new, revised versions of + the GNU Free Documentation License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. See + `http://www.gnu.org/copyleft/'. + + Each version of the License is given a distinguishing version + number. If the Document specifies that a particular numbered + version of this License "or any later version" applies to it, you + have the option of following the terms and conditions either of + that specified version or of any later version that has been + published (not as a draft) by the Free Software Foundation. If + the Document does not specify a version number of this License, + you may choose any version ever published (not as a draft) by the + Free Software Foundation. If the Document specifies that a proxy + can decide which future versions of this License can be used, that + proxy's public statement of acceptance of a version permanently + authorizes you to choose that version for the Document. + + 11. RELICENSING + + "Massive Multiauthor Collaboration Site" (or "MMC Site") means any + World Wide Web server that publishes copyrightable works and also + provides prominent facilities for anybody to edit those works. A + public wiki that anybody can edit is an example of such a server. + A "Massive Multiauthor Collaboration" (or "MMC") contained in the + site means any set of copyrightable works thus published on the MMC + site. + + "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 + license published by Creative Commons Corporation, a not-for-profit + corporation with a principal place of business in San Francisco, + California, as well as future copyleft versions of that license + published by that same organization. + + "Incorporate" means to publish or republish a Document, in whole or + in part, as part of another Document. + + An MMC is "eligible for relicensing" if it is licensed under this + License, and if all works that were first published under this + License somewhere other than this MMC, and subsequently + incorporated in whole or in part into the MMC, (1) had no cover + texts or invariant sections, and (2) were thus incorporated prior + to November 1, 2008. + + The operator of an MMC Site may republish an MMC contained in the + site under CC-BY-SA on the same site at any time before August 1, + 2009, provided the MMC is eligible for relicensing. + + +ADDENDUM: How to use this License for your documents +==================================================== + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and license +notices just after the title page: + + Copyright (C) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. + + If you have Invariant Sections, Front-Cover Texts and Back-Cover +Texts, replace the "with...Texts." line with this: + + with the Invariant Sections being LIST THEIR TITLES, with + the Front-Cover Texts being LIST, and with the Back-Cover Texts + being LIST. + + If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + + If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, to +permit their use in free software. + + + +Tag Table: +Node: Top1373 +Node: Command Line Editing1827 +Node: Introduction and Notation2481 +Node: Readline Interaction4105 +Node: Readline Bare Essentials5298 +Node: Readline Movement Commands7089 +Node: Readline Killing Commands8056 +Node: Readline Arguments9978 +Node: Searching11024 +Node: Readline Init File13177 +Node: Readline Init File Syntax14332 +Node: Conditional Init Constructs29394 +Node: Sample Init File31929 +Node: Bindable Readline Commands35048 +Node: Commands For Moving36107 +Node: Commands For History36970 +Node: Commands For Text40376 +Node: Commands For Killing43104 +Node: Numeric Arguments45248 +Node: Commands For Completion46389 +Node: Keyboard Macros48360 +Node: Miscellaneous Commands48933 +Node: Readline vi Mode52791 +Node: GNU Free Documentation License53705 + +End Tag Table |