#-----------------------------------------------------------------------
# This is the template that the libtecla configure script uses to create
# the libtecla Makefile. It does this by replacing all instances of
# @name@ with the value of the correspondingly named configuration
# variable. You should find another file in the same directory as this
# one, called "configure.in". The latter file contains extensive comments
# explaining how this all works.
#-----------------------------------------------------------------------
# Where is the source code?
srcdir = @srcdir@
# Where do you want to install the library, its header file, and the man pages?
prefix=@prefix@
exec_prefix=@exec_prefix@
LIBDIR=@libdir@
INCDIR=@includedir@
MANDIR=@mandir@
BINDIR=@bindir@
# Which C compiler do you want to use?
CC = @CC@
# If 'make' doesn't define the MAKE variable, define it here.
@SET_MAKE@
# To use RANLIB set the RANLIB variable to ranlib. Otherwise set it to
# :, which is the bourne shell do-nothing command.
RANLIB = @RANLIB@
# Optional flags to pass to the linker.
LDFLAGS = @LDFLAGS@
# Optional C pre-processor flags.
CPPFLAGS = @CPPFLAGS@
# The following optional defines change the characteristics of the library.
#
# USE_TERMINFO
# Use the terminfo terminal information database when looking up
# terminal characteristics. Most modern UNIX and UNIX-like operating
# systems support terminfo, so this define should normally be included.
# If in doubt leave it in, and see if the library compiles.
# USE_TERMCAP
# If you don't have terminfo but do have the termcap database, replace
# the -DUSE_TERMINFO with -DUSE_TERMCAP. If there is a termcap.h in
# /usr/include/, also add -DHAVE_TERMCAP_H.
#
# If neither USE_TERMINFO nor USE_TERMCAP are included, ANSI VT100 control
# sequences will be used to control all terminal types.
#
# For Solaris and Linux, use:
#
# DEFINES = -DUSE_TERMINFO
#
DEFINES = @DEFS@
#
# The following defines are used in addition to the above when compiling
# the reentrant version of the library. Note that the definition of
# _POSIX_C_SOURCE to request reentrant functions, has the unfortunate
# side-effect on some systems of stopping the TIOCGWINSZ ioctl macro from
# getting defined. This in turn stops the library from being
# able to respond to terminal size changes. Under Solaris this can be
# remedied by adding -D__EXTENSIONS__. On linux this isn't necessary.
# If you don't get this right, the library will still work, but
# it will get confused if the terminal size gets changed and you try to
# edit a line that exceeds the terminal width.
#
# Thus on Solaris you should use:
#
# DEFINES_R = -D_POSIX_C_SOURCE=199506L -D__EXTENSIONS__
#
# and on linux you should use:
#
# DEFINES_R = -D_POSIX_C_SOURCE=199506L
#
DEFINES_R = @DEFS_R@
#
# The compiler optimization flags. I like to keep this separate so
# that I can set it to -g from the 'make' command line without having
# to edit this file when debugging the library. If you aren't working
# on modifying the library, leave this set to -O.
#
OPT = -O
#
# These are paranoid gcc warning flags to use when compiling new code.
# Simply invoke make with WARNING_FLAGS='$(PEDANTIC_FLAGS)'.
#
PEDANTIC_FLAGS=-Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls
#
# Specify any extra compiler warning options that you want to use.
# Leave this blank unless you are porting the library to a new system,
# or modifying the library.
#
WARNING_FLAGS=
#
# If you want to compile the demo program, specify any system
# libraries that are needed for the terminal I/O functions.
#
# If you are using terminfo, you will probably only need -lcurses.
# For termcap you may need -ltermcap or -ltermlib.
#
# For Solaris, use:
#
# LIBS = -lcurses
#
# For linux, use:
#
# LIBS = -lncurses
#
LIBS = @LIBS@
#
# List the default target libraries. This should be one or
# both of the words "normal" and "reentrant".
#
TARGETS = @TARGETS@
#
# List which types of the above libraries are required.
# This should be one or both of the words "static" and "shared".
#
TARGET_LIBS = @TARGET_LIBS@
#
# If you want the demo programs to be built, the following variable
# should be assigned the single word: demos. If it isn't assigned
# anything, the demo programs won't be built.
#
DEMOS = demos
#
# List the programs that are to be made by default.
#
PROGRAMS = enhance
#
# List programs for which reentrant versions are to be built by default.
#
PROGRAMS_R =
#-----------------------------------------------------------------------
# You shouldn't need to change anything below this line.
#-----------------------------------------------------------------------
CFLAGS = $(OPT) $(WARNING_FLAGS) $(DEFINES) @CFLAGS@ @SHARED_CFLAGS@
default: $(TARGETS)
normal:
@$(MAKE) -f $(srcdir)/Makefile.rules TARGETS="$(TARGET_LIBS)" SUFFIX="" CFLAGS="$(CFLAGS)" CC="$(CC)" OBJDIR=normal_obj LINK_SHARED='@LINK_SHARED@' SHARED_EXT='@SHARED_EXT@' SHARED_ALT='@SHARED_ALT@' LIBS='$(LIBS)' srcdir='$(srcdir)' LIBDIR='$(LIBDIR)' LN_S='@LN_S@' DEMOS="$(DEMOS)" PROGRAMS='$(PROGRAMS)' RANLIB='$(RANLIB)' LDFLAGS='$(LDFLAGS)' CPPFLAGS='$(CPPFLAGS)'
reentrant:
@$(MAKE) -f $(srcdir)/Makefile.rules TARGETS="$(TARGET_LIBS)" SUFFIX="_r" CFLAGS="$(CFLAGS) $(DEFINES_R)" CC="$(CC)" OBJDIR=reentrant_obj LINK_SHARED='@LINK_SHARED@' SHARED_EXT='@SHARED_EXT@' SHARED_ALT='@SHARED_ALT@' LIBS='$(LIBS)' srcdir='$(srcdir)' LIBDIR='$(LIBDIR)' LN_S='@LN_S@' DEMOS="$(DEMOS)" PROGRAMS='$(PROGRAMS_R)' RANLIB='$(RANLIB)' LDFLAGS='$(LDFLAGS)' CPPFLAGS='$(CPPFLAGS)'
demos: normal
demos_r: reentrant
clean:
rm -rf *.o normal_obj reentrant_obj libtecla*.a demo demo[0-9] demo_r demo[0-9]_r enhance *~ man/*~ man/*/*~ html/*~ compile_reentrant compile_normal `/bin/ls -1 man/*/*.in | sed 's/\.in$$//'`
@endings="@SHARED_EXT@ @SHARED_ALT@" ; \
for alt in $$endings ; do \
lib="libtecla*$$alt" ; \
rm -f $$lib; echo rm -f $$lib ; \
done
distclean: clean
rm -rf config.cache config.status config.log Makefile libtecla.map.opt \
autom*.cache
cp $(srcdir)/Makefile.stub Makefile
install_lib: $(TARGETS) $(LIBDIR)
@for lib in libtecla.a libtecla_r.a ; do \
if [ -f $$lib ] ; then \
cp $$lib $(LIBDIR)/ ; chmod ugo+r $(LIBDIR)/$$lib; \
echo "cp $$lib $(LIBDIR)/ ; chmod ugo+r $(LIBDIR)/$$lib"; \
fi ; \
done
@for lib in libtecla libtecla_r ; do \
src="$$lib@SHARED_EXT@"; \
if [ -f $$src ] ; then \
dst="$(LIBDIR)/$$src"; \
cp -f $$src $$dst; chmod a=rX $$dst; \
echo "cp -f $$src $$dst ; chmod a=rX $$dst"; \
endings="@SHARED_ALT@" ; \
for alt in $$endings ; do \
lnk="$$lib$$alt"; \
(cd $(LIBDIR); rm -f $$lnk; @LN_S@ $$src $$lnk); \
echo "(cd $(LIBDIR); rm -f $$lnk; @LN_S@ $$src $$lnk)"; \
done ; \
fi ; \
done
install_inc: $(INCDIR)
@if [ -f $(srcdir)/libtecla.h ]; then \
cp $(srcdir)/libtecla.h $(INCDIR)/ ; chmod ugo+r $(INCDIR)/libtecla.h; \
echo "cp $(srcdir)/libtecla.h $(INCDIR)/ ; chmod ugo+r $(INCDIR)/libtecla.h"; \
fi
install_man: $(MANDIR) libr_man func_man prog_man misc_man file_man
libr_man:
if test "@MAKE_MAN_PAGES@"_ = "yes"_; then \
for template in man/libr/*.in; do \
page=`basename "$$template" .in`; \
$(srcdir)/install-sh -c -m 644 man/libr/$$page ${MANDIR}/@LIBR_MANDIR@/$$page.@LIBR_MANEXT@; \
done ; \
fi
func_man:
if test "@MAKE_MAN_PAGES@"_ = "yes"_; then \
for template in man/func/*.in; do \
page=`basename "$$template" .in`; \
$(srcdir)/install-sh -c -m 644 man/func/$$page ${MANDIR}/@FUNC_MANDIR@/$$page.@FUNC_MANEXT@; \
done ; \
fi
prog_man:
if test "@MAKE_MAN_PAGES@"_ = "yes"_; then \
for template in man/prog/*.in; do \
page=`basename "$$template" .in`; \
$(srcdir)/install-sh -c -m 644 man/prog/$$page ${MANDIR}/@PROG_MANDIR@/$$page.@PROG_MANEXT@; \
done ; \
fi
misc_man:
if test "@MAKE_MAN_PAGES@"_ = "yes"_; then \
for template in man/misc/*.in; do \
page=`basename "$$template" .in`; \
$(srcdir)/install-sh -c -m 644 man/misc/$$page ${MANDIR}/@MISC_MANDIR@/$$page.@MISC_MANEXT@; \
done ; \
fi
file_man:
if test "@MAKE_MAN_PAGES@"_ = "yes"_; then \
for template in man/file/*.in; do \
page=`basename "$$template" .in`; \
$(srcdir)/install-sh -c -m 644 man/file/$$page ${MANDIR}/@FILE_MANDIR@/$$page.@FILE_MANEXT@; \
done ; \
fi
install_bin: $(BINDIR) $(PROGRAMS) $(PROGRAMS_R)
progs="$(PROGRAMS) $(PROGRAMS_R)"; \
for prog in $$progs; do \
$(srcdir)/install-sh -c -m 755 -s $$prog $(BINDIR)/; \
done
install: install_lib install_inc install_man install_bin
# Make any missing installation directories.
$(MANDIR) $(LIBDIR) $(INCDIR) $(BINDIR):
$(srcdir)/install-sh -d $@
chmod ugo+rx $@
