1 files changed, 114 insertions, 0 deletions
diff --git a/tftpTest/init.c b/tftpTest/init.c
new file mode 100644
index 0000000..d4b6100
--- /dev/null
+++ b/tftpTest/init.c
@@ -0,0 +1,114 @@
+/*
+ * Test RTEMS/KA9Q TFTP device driver
+ *
+ * This program may be distributed and used for any purpose.
+ * I ask only that you:
+ *      1. Leave this author information intact.
+ *      2. Document any changes you make.
+ *
+ * W. Eric Norum
+ * Saskatchewan Accelerator Laboratory
+ * University of Saskatchewan
+ * Saskatoon, Saskatchewan, CANADA
+ * eric@skatter.usask.ca
+ */
+
+#include <bsp.h>
+#include <rtems/error.h>
+#include <tftp.h>
+#include <rtems_ka9q.h>
+#include <stdio.h>
+
+#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
+
+#define CONFIGURE_EXECUTIVE_RAM_SIZE	(128*1024)
+#define CONFIGURE_MAXIMUM_SEMAPHORES	10
+#define CONFIGURE_MAXIMUM_TIMERS	5
+#define CONFIGURE_MAXIMUM_PERIODS	1
+
+#define CONFIGURE_MICROSECONDS_PER_TICK	10486
+
+#define CONFIGURE_INIT
+rtems_task Init (rtems_task_argument argument);
+
+#define CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE
+rtems_driver_address_table Device_drivers[] = {
+  CONSOLE_DRIVER_TABLE_ENTRY,
+  CLOCK_DRIVER_TABLE_ENTRY,
+  TFTP_DRIVER_TABLE_ENTRY,
+};
+
+#include <confdefs.h>
+
+/*
+ * Board ethernet address
+ * REPLACE THIS WITH YOUR OWN VALUE BEFORE TRYING TO USE THIS PROGRAM!
+ */
+#define MY_ETHERNET_ADDRESS "48:3E:3E:21:2E:D5"
+#define MY_ETHERNET_ADDRESS "prom"
+
+#include <bootp.h>
+extern void testTFTP (void);
+
+/*
+ * RTEMS Startup Task
+ */
+rtems_task
+Init (rtems_task_argument ignored)
+{
+	int i;
+	rtems_task_priority oldPri;
+	rtems_interval ticksPerSecond;
+
+	/*
+	 * Get some timing information
+	 */
+	rtems_clock_get (RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticksPerSecond);
+
+	/*
+	 * Start KA9Q
+	 */
+	rtems_task_set_priority (RTEMS_SELF, 30, &oldPri);
+	rtems_ka9q_start (20);
+
+	/*
+	 * Hook up drivers
+	 */
+	if (rtems_ka9q_execute_command ("attach rtems broadcast n ether " MY_ETHERNET_ADDRESS))
+		rtems_panic ("Can't attach Ethernet driver.\n");
+
+	/*
+	 * Configure the driver
+	 */
+	if (rtems_ka9q_execute_command ("ifconfig rtems broadcast 255.255.255.255"))
+		rtems_panic ("Can't configure Ethernet driver.\n");
+
+	/*
+	 * Add the ethernet broadcast address to the ARP table.
+	 */
+	if (rtems_ka9q_execute_command ("arp add 255.255.255.255 ether FF:FF:FF:FF:FF:FF"))
+		rtems_panic ("Can't add broadcast entry to ARP table.\n");
+
+	/*
+	 * Get BOOTP information
+	 */
+	for (i = 0 ; ; ) {
+		if (rtems_ka9q_execute_command ("bootp") == 0)
+			break;
+		if (++i == 10)
+			rtems_panic ("Can't get information from BOOTP server.\n");
+		rtems_task_wake_after (i * ticksPerSecond);
+	}
+
+	/*
+	 * Test TFTP driver
+	 */
+	testTFTP ();
+
+	/*
+	 * Wind things up
+	 */
+	rtems_task_wake_after (2 * ticksPerSecond);
+	rtems_ka9q_execute_command ("detach rtems");
+	exit (0);
+}