/*
* Network configuration -- QEMU NOT using DHCP
*
************************************************************
* EDIT THIS FILE TO REFLECT YOUR NETWORK CONFIGURATION *
* BEFORE RUNNING ANY RTEMS PROGRAMS WHICH USE THE NETWORK! *
************************************************************
*
* networkconfig.h,v 1.8 2001/08/31 18:11:43 joel Exp
*/
#ifndef _RTEMS_NETWORKCONFIG_H_
#define _RTEMS_NETWORKCONFIG_H_
/*
* The following will normally be set by the BSP if it supports
* a single network device driver. In the event, it supports
* multiple network device drivers, then the user's default
* network device driver will have to be selected by a BSP
* specific mechanism.
*/
#undef RTEMS_BSP_NETWORK_DRIVER_NAME
#undef RTEMS_BSP_NETWORK_DRIVER_ATTACH
#if 0
#define RTEMS_BSP_NETWORK_DRIVER_NAME "ne1"
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_ne_driver_attach
#else
int
rtems_fxp_attach(struct rtems_bsdnet_ifconfig *config, int attaching);
#define RTEMS_BSP_NETWORK_DRIVER_NAME "fxp1"
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_fxp_attach
#endif
#ifdef RTEMS_USE_BOOTP
#undef RTEMS_USE_BOOTP
#endif
/*
* If you use DHCP on the QEMU instance, there is less configuration
*/
// #define RTEMS_USE_BOOTP
#include <bsp.h>
/*
* Define RTEMS_SET_ETHERNET_ADDRESS if you want to specify the
* Ethernet address here. If RTEMS_SET_ETHERNET_ADDRESS is not
* defined the driver will choose an address.
*/
//#define RTEMS_SET_ETHERNET_ADDRESS
#ifdef RTEMS_SET_ETHERNET_ADDRESS
#undef RTEMS_SET_ETHERNET_ADDRESS
#endif
#if (defined (RTEMS_SET_ETHERNET_ADDRESS))
/* static char ethernet_address[6] = { 0x08, 0x00, 0x3e, 0x12, 0x28, 0xb1 }; */
static char ethernet_address[6] = { 0x00, 0x80, 0x7F, 0x22, 0x61, 0x77 };
#endif
#ifdef RTEMS_USE_LOOPBACK
/*
* Loopback interface
*/
extern void rtems_bsdnet_loopattach();
static struct rtems_bsdnet_ifconfig loopback_config = {
"lo0", /* name */
rtems_bsdnet_loopattach, /* attach function */
NULL, /* link to next interface */
"127.0.0.1", /* IP address */
"255.0.0.0", /* IP net mask */
};
#endif
/*
* Default network interface
*/
static struct rtems_bsdnet_ifconfig netdriver_config = {
RTEMS_BSP_NETWORK_DRIVER_NAME, /* name */
RTEMS_BSP_NETWORK_DRIVER_ATTACH, /* attach function */
#ifdef RTEMS_USE_LOOPBACK
&loopback_config, /* link to next interface */
#else
NULL, /* No more interfaces */
#endif
#if (defined (RTEMS_USE_BOOTP))
NULL, /* BOOTP supplies IP address */
NULL, /* BOOTP supplies IP net mask */
#else
"10.0.2.5", /* IP address */
"255.255.255.0", /* IP net mask */
#endif /* !RTEMS_USE_BOOTP */
#if (defined (RTEMS_SET_ETHERNET_ADDRESS))
ethernet_address, /* Ethernet hardware address */
#else
NULL, /* Driver supplies hardware address */
#endif
0, /* Use default driver parameters */
0, /* mtu */
0, /* rbuf_count */
0, /* xbuf_count */
0, /* port */
9 /* irq */
};
/*
* Network configuration
*/
struct rtems_bsdnet_config rtems_bsdnet_config = {
&netdriver_config,
#if (defined (RTEMS_USE_BOOTP))
rtems_bsdnet_do_bootp,
#else
NULL,
#endif
0, /* Default network task priority */
256 * 1024, /* 256K - not default mbuf capacity */
256 * 1024, /* 256K - not default mbuf cluster capacity */
#if (!defined (RTEMS_USE_BOOTP))
"rtems", /* Host name */
"", /* Domain name */
"10.0.2.1", /* Gateway */
"10.0.0.1", /* Log host */
{"10.0.2.3" }, /* Name server(s) */
{"" }, /* NTP server(s) */
#else
#error "Fill me in"
#endif /* !RTEMS_USE_BOOTP */
1, /* sb_efficiency */
0, /* udp_tx_buf_size */
0, /* udp_rx_buf_size */
0, /* tcp_tx_buf_size */
0 /* tcp_rx_buf_size */
};
/*
* For TFTP test application
*/
#if (defined (RTEMS_USE_BOOTP))
#define RTEMS_TFTP_TEST_HOST_NAME "BOOTP_HOST"
#define RTEMS_TFTP_TEST_FILE_NAME "BOOTP_FILE"
#else
#define RTEMS_TFTP_TEST_HOST_NAME "XXX.YYY.ZZZ.XYZ"
#define RTEMS_TFTP_TEST_FILE_NAME "tftptest"
#endif
/*
* For NFS test application
*
* NFS mount and a directory to ls once mounted
*/
#define RTEMS_NFS_SERVER "192.168.1.210"
#define RTEMS_NFS_SERVER_PATH "/home"
#define RTEMS_NFS_LS_PATH "/mnt/nfstest"
#endif /* _RTEMS_NETWORKCONFIG_H_ */