blob: 83244a2291cbc3c7b18dae92aca9a7fac59879e1 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
/*
* Use TIMER 1 and TIMER 2 for Timing Test Suite
* The hardware on the MC68360 makes these routines very simple.
*
* Based on the `gen68302' board support package, and covered by the
* original distribution terms.
*
* W. Eric Norum
* Saskatchewan Accelerator Laboratory
* University of Saskatchewan
* Saskatoon, Saskatchewan, CANADA
* eric@skatter.usask.ca
*/
/*
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* NOTE: It is important that the timer start/stop overhead be
* determined when porting or modifying this code.
*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*/
#include <rtems.h>
#include <rtems/btimer.h>
#include <bsp.h>
#include <rtems/m68k/m68360.h>
void
benchmark_timer_initialize (void)
{
/*
* Reset timers 1 and 2
*/
m360.tgcr &= ~0x00FF;
m360.tcn1 = 0;
m360.tcn2 = 0;
m360.ter1 = 0xFFFF;
m360.ter2 = 0xFFFF;
/*
* Cascade timers 1 and 2
*/
m360.tgcr |= 0x0080;
/*
* Configure timers 1 and 2 to a single 32-bit, 1 MHz timer.
* HARDWARE:
* Change the `25' to match your processor clock
*/
m360.tmr2 = ((25-1) << 8) | 0x2;
m360.tmr1 = 0;
/*
* Start the timers
*/
m360.tgcr |= 0x0011;
}
/*
* Return timer value in microsecond units
*/
uint32_t
benchmark_timer_read (void)
{
unsigned short val;
val = m360.tcn1;
return val;
}
void
benchmark_timer_disable_subtracting_average_overhead(bool find_flag)
{
}
|