diff options
Diffstat (limited to 'include/powerpc/mcp750/bsp/VMEConfig.h')
-rw-r--r-- | include/powerpc/mcp750/bsp/VMEConfig.h | 233 |
1 files changed, 233 insertions, 0 deletions
diff --git a/include/powerpc/mcp750/bsp/VMEConfig.h b/include/powerpc/mcp750/bsp/VMEConfig.h new file mode 100644 index 0000000000..9b355819f1 --- /dev/null +++ b/include/powerpc/mcp750/bsp/VMEConfig.h @@ -0,0 +1,233 @@ +#ifndef RTEMS_BSP_VME_CONFIG_H +#define RTEMS_BSP_VME_CONFIG_H + +/* BSP specific address space configuration parameters */ + +/* + * Authorship + * ---------- + * This software was created by + * Till Straumann <strauman@slac.stanford.edu>, 2002, + * Stanford Linear Accelerator Center, Stanford University. + * + * Acknowledgement of sponsorship + * ------------------------------ + * This software was produced by + * the Stanford Linear Accelerator Center, Stanford University, + * under Contract DE-AC03-76SFO0515 with the Department of Energy. + * + * Government disclaimer of liability + * ---------------------------------- + * Neither the United States nor the United States Department of Energy, + * nor any of their employees, makes any warranty, express or implied, or + * assumes any legal liability or responsibility for the accuracy, + * completeness, or usefulness of any data, apparatus, product, or process + * disclosed, or represents that its use would not infringe privately owned + * rights. + * + * Stanford disclaimer of liability + * -------------------------------- + * Stanford University makes no representations or warranties, express or + * implied, nor assumes any liability for the use of this software. + * + * Stanford disclaimer of copyright + * -------------------------------- + * Stanford University, owner of the copyright, hereby disclaims its + * copyright and all other rights in this software. Hence, anyone may + * freely use it for any purpose without restriction. + * + * Maintenance of notices + * ---------------------- + * In the interest of clarity regarding the origin and status of this + * SLAC software, this and all the preceding Stanford University notices + * are to remain affixed to any copy or derivative of this software made + * or distributed by the recipient and are to be affixed to any copy of + * software made or distributed by the recipient that contains a copy or + * derivative of this software. + * + * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03 + */ + +/* + * The BSP maps VME address ranges into + * one BAT. + * NOTE: the BSP (startup/bspstart.c) uses + * hardcoded window lengths that match this + * layout: + * + * BSP_VME_BAT_IDX defines + * which BAT to use for mapping the VME bus. + * If this is undefined, no extra BAT will be + * configured and VME has to share the available + * PCI address space with PCI devices. + * + * If you do define BSP_VME_BAT_IDX you must + * make sure the corresponding BAT is really + * available and unused! + */ + +#if defined(mvme2100) +#define _VME_A32_WIN0_ON_PCI 0x90000000 +#define _VME_A24_ON_PCI 0x9f000000 +#define _VME_A16_ON_PCI 0x9fff0000 +#define BSP_VME_BAT_IDX 1 +#else +#define _VME_A32_WIN0_ON_PCI 0x10000000 +#define _VME_A24_ON_PCI 0x1f000000 +#define _VME_A16_ON_PCI 0x1fff0000 +#define BSP_VME_BAT_IDX 0 +#endif + +/* start of the A32 window on the VME bus + * TODO: this should perhaps be a run-time configuration option + */ +#define _VME_A32_WIN0_ON_VME 0x20000000 + +/* if _VME_DRAM_OFFSET is defined, the BSP + * will map the board RAM onto the VME bus, starting + * at _VME_DRAM_OFFSET + */ +#define _VME_DRAM_OFFSET 0xc0000000 + +/* Define BSP_PCI_VME_DRIVER_DOES_EOI to let the vmeUniverse + * driver (Tsi148 driver doesn't implement this) implement + * VME IRQ priorities in software. + * + * Here's how this works: + * + * 1) VME IRQ happens + * 2) universe propagates IRQ to PCI/PPC/main interrupt + * controller ('PIC' - programmable interrupt controller). + * 3) PIC driver dispatches universe driver's ISR + * 4) universe driver ISR acknowledges IRQ on VME, + * determines VME vector. + * ++++++++++++ stuff between ++ signs is related to SW priorities +++++++++ + * 5) universe driver *masks* all VME IRQ levels <= interrupting + * level. + * 6) universe driver calls PIC driver's 'EOI' routine. + * This effectively re-enables PCI and hence higher + * level VME interrupts. + * 7) universe driver dispatches user VME ISR. + * + * ++>> HIGHER PRIORITY VME IRQ COULD HAPPEN HERE and would be handled <<++ + * + * 8) user ISR returns, universe driver re-enables lower + * level VME interrupts, returns. + * 9) universe driver ISR returns control to PIC driver + * 10) PIC driver *omits* regular EOI sequence since this + * was already done by universe driver (step 6). + * ++++++++++++ end of special handling (SW priorities) ++++++++++++++++++++ + * 11) PIC driver ISR dispatcher returns. + * + * Note that the BSP *MUST* provide the following hooks + * in order for this to work: + * a) bsp.h must define the symbol BSP_PIC_DO_EOI to + * a sequence of instructions that terminates an + * interrupt at the interrupt controller. + * b) The interrupt controller driver must check the + * interrupt source and *must omit* running the EOI + * sequence if the interrupt source is the vmeUniverse + * (because the universe driver already ran BSP_PIC_DO_EOI) + * The interrupt controller must define the variable + * + * int _BSP_vme_bridge_irq = -1; + * + * which is assigned the universe's interrupt line information + * by vme_universe.c:BSP_VMEIrqMgrInstall(). The interrupt + * controller driver may use this variable to determine + * if an IRQ was caused by the universe. + * + * c) define BSP_PCI_VME_DRIVER_DOES_EOI + * + * NOTE: If a) and b) are not implemented by the BSP + * BSP_PCI_VME_DRIVER_DOES_EOI must be *undefined*. + */ +#define BSP_PCI_VME_DRIVER_DOES_EOI + +#ifdef BSP_PCI_VME_DRIVER_DOES_EOI +/* don't reference vmeUniverse0PciIrqLine directly from the irq + * controller driver - leave it up to BSP_VMEIrqMgrInstall() to + * set _BSP_vme_bridge_irq. That way, we can avoid linking + * the universe driver if VME is unused... + */ +extern int _BSP_vme_bridge_irq; +#endif + +/* If your BSP requires a non-standard way to configure + * the VME interrupt manager then define the symbol + * + * BSP_VME_UNIVERSE_INSTALL_IRQ_MGR + * + * to a proper instruction sequence that installs the + * universe interrupt manager. This requires knowledge + * of the wiring between the universe and the PIC (main + * interrupt controller), i.e., which IRQ 'pins' of the + * universe are wired to which 'lines'/inputs at the PIC. + * (consult vmeUniverse.h for more information). + * + * When installing the universe IRQ manager it is also + * possible to specify whether it should try to share + * PIC interrupts with other sources. This might not + * be supported by all BSPs (but the unverse driver + * recognizes that). + * + * If BSP_VME_UNIVERSE_INSTALL_IRQ_MGR is undefined then + * the default algorithm is used (vme_universe.c): + * + * This default setup uses only a single wire. It reads + * the PIC 'line' from PCI configuration space and assumes + * this to be wired to the first (LIRQ0) IRQ input at the + * universe. The default setup tries to use interrupt + * sharing. + */ + +#include <bsp/motorola.h> +#include <bsp/pci.h> + +#define BSP_VME_UNIVERSE_INSTALL_IRQ_MGR(err) \ +do { \ +int bus, dev, i = 0, j; \ +const struct _int_map *bspmap; \ + /* install the VME interrupt manager; \ + * if there's a bsp route map, use it to \ + * configure additional lines... \ + */ \ + err = -1; \ + if (0 == pci_find_device(0x10e3, 0x0000, 0, &bus, &dev, &i)){ \ + if ( (bspmap = motorolaIntMap(currentBoard)) ) { \ + for ( i=0; bspmap[i].bus >= 0; i++ ) { \ + if ( bspmap[i].bus == bus && bspmap[i].slot == dev ) { \ + int pins[5], names[4]; \ + /* found it; use info here... */ \ + /* copy up to 4 entries; terminated with -1 pin */ \ + for ( j=0; \ + j<5 && (pins[j]=bspmap[i].pin_route[j].pin-1)>=0; \ + j++) { \ + names[j] = bspmap[i].pin_route[j].int_name[0]; \ + } \ + pins[4] = -1; \ + if ( 0 == vmeUniverseInstallIrqMgrAlt( \ + VMEUNIVERSE_IRQ_MGR_FLAG_SHARED, /* shared IRQs */\ + pins[0], names[0], \ + pins[1], names[1], \ + pins[2], names[2], \ + pins[3], names[3], \ + -1) ) { \ + i = -1; \ + break; \ + } \ + } \ + } \ + } \ + if ( i >= 0 ) \ + err = vmeUniverseInstallIrqMgrAlt( \ + VMEUNIVERSE_IRQ_MGR_FLAG_SHARED, \ + 0,-1, \ + -1); \ + } \ +} while (0) + +extern int BSP_VMEInit(void); +extern int BSP_VMEIrqMgrInstall(void); + +#endif |