diff options
Diffstat (limited to 'include/bsp/gti2creg.h')
-rw-r--r-- | include/bsp/gti2creg.h | 83 |
1 files changed, 83 insertions, 0 deletions
diff --git a/include/bsp/gti2creg.h b/include/bsp/gti2creg.h new file mode 100644 index 0000000000..33e566f5bc --- /dev/null +++ b/include/bsp/gti2creg.h @@ -0,0 +1,83 @@ +/* $NetBSD: gti2creg.h,v 1.2 2005/02/27 00:27:21 perry Exp $ */ + +/* + * Copyright (c) 2005 Brocade Communcations, inc. + * All rights reserved. + * + * Written by Matt Thomas for Brocade Communcations, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of Brocade Communications, Inc. may not be used to endorse + * or promote products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY BROCADE COMMUNICATIONS, INC. ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL EITHER BROCADE COMMUNICATIONS, INC. BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _DEV_MARVELL_GTI2CREG_H_ +#define _DEV_MARVELL_GTI2CREG_H_ + +#define I2C_REG_SlaveAddr 0xc000 +#define I2C_REG_ExtSlaveAddr 0xc010 +#define I2C_REG_Data 0xc004 +#define I2C_REG_Control 0xc008 +#define I2C_REG_Status 0xc00c +#define I2C_REG_BaudRate 0xc00c +#define I2C_REG_SoftReset 0xc01c + +#define I2C_SlaveAddr_GCE 0x0001 /* Act as Slave */ +#define I2C_SlaveAddr_SAddr 0x7E + +#define I2C_Control_ACK 0x04 +#define I2C_Control_IFlg 0x08 +#define I2C_Control_Stop 0x10 +#define I2C_Control_Start 0x20 +#define I2C_Control_TWSIEn 0x40 +#define I2C_Control_IntEn 0x80 + +/* + * F(I2C) = F(Tclk) / ( 10 * (M + 1) * (2^(N+1))) + * For Tclk = 100MHz, M = 4, N = 4: F = 62.5KHz + * For Tclk = 100MHz, M = 13, N = 3: F = 96.2KHz + */ +#define I2C_BaudRate(M, N) (((M) << 3) | (N)) +#define I2C_BaudRate_62_5K I2C_BaudRate(4, 4) +#define I2C_BaudRate_96_2K I2C_BaudRate(13, 3) + +#define I2C_Status_BusError 0x00 /* Bus error */ +#define I2C_Status_Started 0x08 /* Start condition xmitted */ +#define I2C_Status_ReStarted 0x10 /* Repeated start condition xmitted */ +#define I2C_Status_AddrWriteAck 0x18 /* Adr + wr bit xmtd, ack rcvd */ +#define I2C_Status_AddrWriteNoAck 0x20 /* Adr + wr bit xmtd, NO ack rcvd */ +#define I2C_Status_MasterWriteAck 0x28 /* Master xmtd data byte, ack rcvd */ +#define I2C_Status_MasterWriteNoAck 0x30 /* Master xmtd data byte, NO ack rcvd*/ +#define I2C_Status_MasterLostArb 0x38 /* Master lost arbitration during + address or data transfer */ +#define I2C_Status_AddrReadAck 0x40 /* Adr + rd bit xmtd, ack rcvd */ +#define I2C_Status_AddrReadNoAck 0x48 /* Adr + rd bit xmtd, NO ack rcvd */ +#define I2C_Status_MasterReadAck 0x50 /* Master rcvd data bye, ack rcvd */ +#define I2C_Status_MasterReadNoAck 0x58 /* Master rcvd data bye, NO ack rcvd */ +#define I2C_Status_2ndAddrWriteAck 0xd0 /* 2nd adr + wr bit xmid, ack rcvd */ +#define I2C_Status_2ndAddrWriteNoAck 0xd8 /* 2nd adr + wr bit xmid, NO ack rcvd */ +#define I2C_Status_2ndAddrReadAck 0xe0 /* 2nd adr + rd bit xmid, ack rcvd */ +#define I2C_Status_2ndAddrReadNoAck 0xe8 /* 2nd adr + rd bit xmtd, NO ack rcvd */ +#define I2C_Status_Idle 0xf8 /* Idle */ + +#endif /* _DEV_MARVELL_GTI2CREG_H_ */ |